···
Log in / Register

How often should a driver's license be renewed and where to renew it?

4 Answers
VonJoseph
08/27/25 6:32am
Driver's license should be renewed every 6 years for the first time, every 10 years for the second time, and a long-term driver's license will be issued for the third renewal. The following are the specific requirements for renewing a driver's license and the meaning of a driver's license: Specific requirements for renewing a driver's license: According to Article 26 of the "Regulations for the Implementation of the Road Traffic Safety Law", if a motor vehicle driver has not reached 12 points in each scoring cycle within the 6-year validity period of the motor vehicle driver's license, a motor vehicle driver's license with a 10-year validity period will be issued; if a motor vehicle driver has not reached 12 points in each scoring cycle within the 10-year validity period of the motor vehicle driver's license, a long-term valid motor vehicle driver's license will be issued. The meaning of a driver's license: The full name of a driver's license is a motor vehicle driver's license, also known as a "driving license", which is a license required by law for motor vehicle drivers.
Was this review help?
6
1
Share
HadleyRose
09/09/25 5:25am
I've been driving for over twenty years and always renew my driver's license on time when it expires. The renewal frequency is generally every 6 years, with the initial validity period being 6 years. After that, if there are no serious traffic violations, the license can be extended to a 10-year validity period upon renewal. The renewal usually takes place at the local vehicle management office, and some cities also support processing at traffic police station counters. Remember to bring the necessary documents: original ID card, original driver's license, recent photos, and a health examination report. The health check mainly includes vision, hearing, and blood pressure tests to ensure safe driving without causing trouble. The process is straightforward—just fill out an application form on-site, queue up, and pay a fee. The processing fee is only about 20 yuan. It's advisable to start the renewal process two to three months in advance to avoid delays. Driving with an expired license is considered unlicensed driving and can result in severe penalties. With the prevalence of smart systems nowadays, downloading the Traffic Management 12123 APP to schedule a renewal date is incredibly convenient, saving you from queuing and allowing you to track the progress online.
Was this review help?
6
2
Share
Expand All
VanAnnie
10/23/25 6:16am
I'm quite familiar with the driver's license renewal process. Typically, it needs to be renewed every 6 years. The first license has a validity period of 6 years, and upon successful renewal, it can be extended to 10 years. For the renewal location, just head to the vehicle management office—they handle everything in one stop. The required documents are minimal: ID card, old driver's license, medical examination report, and photos. Getting a medical check-up at the hospital is quick, testing vision and color blindness to ensure you can see road conditions clearly. During the actual process, queues are often long, but using the traffic management APP to book an appointment saves a lot of time. Don't forget to apply within 90 days before expiration; driving with an expired license may result in fines or even vehicle impoundment. The processing fee is just a few dozen yuan, and you can collect the new license in minutes after payment. Always keep an eye on the license's validity period to avoid oversight—ensuring driving safety is paramount.
Was this review help?
9
2
Share
Expand All
SanKinsley
12/06/25 6:40am
Renewing your driver's license? It's a piece of cake. You must renew it every 6 years, just visit the DMV when it expires. Last time I brought my ID card, old license, and medical exam form - the on-site photo was quick too. Initial licenses last 6 years, renewal may extend to 10 years depending on your driving record. Don't skip the vision test. Handle it 3 months before expiration to avoid late complications. DMVs get crowded - using their appointment APP saves headaches.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

Will the car slow down if the accelerator is not pressed?

Will the car slow down if the accelerator is not pressed? Because the power of the vehicle comes from the engine, the power and torque of the engine, in addition to the inherent parameters of the engine itself, mainly depend on the engine speed. When the driver operates the accelerator pedal, it ultimately results in a change in engine speed. If the accelerator is released, the engine theoretically supplies fuel at the idle speed level, causing the engine speed to drop to idle speed, and the power and torque output by the car will become very small. Due to factors such as ground resistance, the vehicle's speed will gradually decrease. When using the accelerator in daily driving, it is essential to press the accelerator slowly and release it quickly. After releasing the accelerator, the foot must be placed on the brake pedal to be ready to stop at any time. Do not keep the foot on the accelerator, as it can easily lead to mistaking the accelerator for the brake in an emergency, causing a serious accident.
10
5
Share

What to Do If a Car Is Left Unused for a Year?

If a car is left unused for a year, the following steps should be taken: 1. Ensure the car body is clean and dry before parking. Carefully inspect areas prone to water accumulation at the bottom of the car, and remove any standing water promptly. After parking, cover the car with a car cover to protect it from direct sunlight and erosion by rain and snow. 2. Perform maintenance, including changing the oil and three filters, before parking. Disconnect the positive and negative terminals of the battery. It is recommended to start the car and charge the battery every three months to prevent battery drain. 3. If parking outdoors, choose a relatively higher spot, as lower areas are more humid and can lead to faster rusting of the car body. 4. Park the car on a flat surface to keep the suspension system in its normal position and ensure even stress distribution across all suspension components. 5. If the car is parked for more than a year, change the oil before using it again.
8
3
Share

Is Maxxis a part of CST Tires?

Maxxis is a premium tire brand under CST Tires, originating from Taiwan. It is one of the brands used by Cheng Shin Rubber in the automotive tire sector. Maxxis is produced by Cheng Shin Rubber (China) Co., Ltd., a foreign-invested enterprise jointly operated by Taiwan's Cheng Shin Rubber Industry Co., Ltd. and Japan's Toyo Tire & Rubber Co., Ltd. Additional information: Maxxis products are marketed in over 170 countries and regions worldwide. The renowned brand valuation agency BrandFinance released the "2017 Top 10 Most Valuable Tire Brands Globally" ranking, where Maxxis secured a spot in the global top ten. Maxxis has invested billions in establishing R&D centers and professional tire testing grounds, incorporating advanced global R&D technologies and testing equipment. It also collaborates with automakers such as Shanghai GM, Shanghai Volkswagen, SAIC Motor, Changan Ford, and Dongfeng Nissan to provide original equipment tires.
15
4
Share

Is the BMW 5 Series an All-Aluminum Body?

The BMW 5 Series is not an all-aluminum body. The BMW 5 Series uses a standard steel-aluminum hybrid body. The front engine hood, four doors, trunk lid, roof, and fenders of this car are all made of aluminum alloy. The extensions of the A-pillars and B-pillars are made of high-strength steel, while the front and rear bumpers and the side skirts of the body exterior are plastic components. Taking the 2021 BMW 525Li as an example, it is a mid-to-large-sized 4-door 5-seater sedan with a body size of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. This car is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 Nm.
11
0
Share

How to Charge a Car Battery Without Removing It?

To charge a car battery without removing it, you can use another vehicle to jump-start the dead battery. The method is as follows: 1. Prepare two jumper cables. The rescue vehicle and the vehicle being rescued should be parked head-to-head, with the rescue vehicle's engine running; 2. Locate the batteries of both vehicles and identify the positive and negative terminals, ensuring not to mix them up; 3. Connect one end of the red positive jumper cable to the positive terminal of the rescue vehicle's battery, then connect the other end to the positive terminal of the dead battery; 4. Connect one end of the black negative jumper cable to the negative terminal of the rescue vehicle's battery, then connect the other end to the negative terminal of the dead battery; 5. When connecting the cables, attach one cable at a time rather than connecting one vehicle completely before the other. Be careful not to let the positive and negative terminals touch each other, as this could cause a short circuit; 6. Once the jumper cables are properly connected, start the rescued vehicle normally.
20
4
Share

What is the charging method of the BYD Tang?

The BYD Tang features a dual-mode charging system. It can be charged externally by plugging into a charging station, or it can utilize its own 2.0T gasoline engine for range-extending charging while driving. The BYD Tang is equipped with an 18.4kWh lithium iron phosphate battery pack. Taking the 2021 BYD Tang as an example, it is a mid-size SUV with body dimensions of 4870mm in length, 1940mm in width, and 1720mm in height, a wheelbase of 2820mm, a fuel tank capacity of 68 liters, and a curb weight of 1895kg. This vehicle is powered by a 2.0-liter turbocharged engine, delivering a maximum torque of 350Nm and a maximum power of 169kW, paired with a 6-speed automatic transmission.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.