How often should a car over 6 years old be inspected?

Should the Handbrake Be Applied When Changing Tires?

When replacing tires, the vehicle should be in park and the handbrake should be engaged. Some vehicles have wheel hub covers that need to be removed first to loosen the nuts, which can be taken off using a wrench. Principles of Tire Replacement: Tires of different specifications have varying outer diameters and section widths when inflated. Installing them on the same axle will result in uneven load distribution. Due to the different carcass structures between radial tires and bias tires, their cushioning performance and circumferential deformation differ. Mixing these two types of tires on the same axle will inevitably lead to uneven load-bearing and inconsistent wear. Steps for Changing Tires: Place the jack in the designated slot under the vehicle. Use the jack handle to turn clockwise, raising the jack until it just touches the vehicle's underside. Loosen the wheel bolts with a socket wrench, but do not remove them completely. Note that turning counterclockwise loosens the bolts, while clockwise tightens them. Continue raising the jack until the wheel is about 5 centimeters off the ground. Fully loosen and remove the bolts, then take off the tire. Retrieve the spare tire, place it onto the hub, and store the removed tire in the designated space.

10

5

Share

Is it correct for vehicles to drive on the right side in China?

According to the Road Traffic Safety Law of China, motor vehicles and non-motor vehicles should drive on the right side, while pedestrians should walk on sidewalks. If there are no sidewalks, pedestrians should walk on the side of the road. Relevant regulations: Article 35 of the Road Traffic Safety Law of the People's Republic of China states that motor vehicles and non-motor vehicles shall drive on the right side. Article 36: Based on road conditions and traffic needs, roads are divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks. Motor vehicles, non-motor vehicles, and pedestrians should travel in their respective lanes. If the road is not divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks, motor vehicles should travel in the middle of the road, while non-motor vehicles and pedestrians should travel on both sides of the road. Countries that drive on the right: Countries that drive on the right are typically continental countries, such as the United States, China, Russia, Germany, France, Brazil, etc. Countries that drive on the left are typically island nations, peninsulas, or subcontinental countries, such as the United Kingdom, Japan, India, Pakistan, Indonesia, Thailand, Australia, New Zealand, etc.

5

1

Share

What are the new regulations for vehicle annual inspection in November 2020?

The new regulations for vehicle annual inspection in November 2020 include two aspects: new rules for vehicle annual inspection and an expansion of the scope of motor vehicle exemption from inspection. The details are as follows: 1. Latest vehicle annual inspection regulations: For non-operational small and mini passenger vehicles (excluding vans) that are over 6 years but less than 10 years old, the inspection cycle is relaxed from once a year to once every two years. This means that private cars within 10 years only need to undergo on-site inspection twice, specifically in the 6th and 8th years. For private cars over 10 years old, the original inspection cycle still applies, i.e., once a year for vehicles aged 10-15 years, and once every six months for vehicles over 15 years old. 2. Expansion of the scope of motor vehicle exemption from inspection: On the basis of exempting non-operational small and mini passenger vehicles with 6 seats or less from inspection within 6 years, the exemption is extended to non-operational small and mini passenger vehicles (excluding vans) with 7 to 9 seats within 6 years. For non-operational small and mini passenger vehicles (excluding vans) that are over 6 years but less than 10 years old, the inspection cycle is adjusted from once a year to once every two years. If a vehicle is involved in a fatal traffic accident or is illegally modified and penalized according to law, it will still be inspected according to the original cycle to ensure the vehicle's safety performance.

7

5

Share

Can You Make a U-Turn Over Yellow Solid and Dashed Lines?

A U-turn is permitted over yellow dashed lines when there are no prohibitory U-turn signs and it does not interfere with normal traffic flow. However, U-turns over yellow solid lines are prohibited and constitute a traffic violation. According to the "Road Traffic Safety Law," violators will be fined 200 yuan and receive 3 demerit points. Typically, on long stretches of roads, solid or dashed white or yellow lines are present in the middle sections or before intersections. U-turns are strictly prohibited over any solid lines. Permissible U-turn scenarios: Intersections with U-turn signs allow U-turns: If an intersection has clear U-turn signage, U-turns are permitted. If there are U-turn traffic signals, follow the signal instructions. In the absence of signals, make the U-turn without obstructing other vehicles or pedestrians. Intersections without explicit prohibitions on U-turns or left turns allow U-turns: If there are no signs explicitly banning U-turns, they are allowed. "No explicit prohibition" means the absence of "No U-turn," "No Left Turn" signs, or solid center lines, making U-turns permissible. U-turns are also allowed over yellow grid lines: Yellow grid lines indicate no-stopping zones at intersections prone to congestion, important entrances, or other designated areas. Stopping on these lines (including at traffic lights) is a violation. While stopping is prohibited, U-turns are allowed over yellow grid lines unless there is a central divider. These lines effectively permit U-turns. Intersections with U-turn traffic signals: This is straightforward—if there is a U-turn signal, proceed only when it is green. When "No Left Turn" and "U-turn Permitted" signs coexist: U-turns are allowed, but left turns are not. Note that "No U-turn" is not the same as "No Left Turn." Key considerations when making a U-turn: Observe road markings—U-turns are never allowed over solid lines under any circumstances. Continue driving to find a suitable U-turn spot. If there is a "No Left Turn" sign, U-turns are also prohibited at that intersection, even if not explicitly stated, as U-turns inherently involve left-turning movements. U-turns must be made from the innermost left-turn lane. U-turns are not permitted from the second left-turn lane. Always yield to oncoming traffic before making a U-turn to avoid accidents, or you will bear full liability. Near intersection stop lines, lane arrows guide vehicle positioning. Not all leftmost lanes have left-turn arrows; some may have straight arrows, prohibiting U-turns even without explicit signs. U-turns on crosswalks are illegal.

6

0

Share

Can a non-owner apply for ETC for a vehicle?

Non-owners can also apply for ETC. According to the "Implementation Plan for Accelerating the Application Service of Electronic Toll Collection (ETC) on Highways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (the page with the latest annual inspection stamp) are required. If applying on behalf of someone else, the original and a copy of the proxy's valid ID card are also needed. If applying for ETC through major bank branches, a debit card or credit card from the corresponding bank is also required. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a deposit when binding ETC with a debit card. ETC Deduction Principle: There will be one or more ETC lanes on highways. Through microwave short-range communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with the bank, the purpose of paying tolls without stopping at the toll station is achieved. All of this is based on the principle of "pass first, deduct later." Benefits of Installing ETC: Save time: Eliminates the hassle of waiting in line. Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution. Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption. Improve efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. There will also be exploration of deep integration between the ETC system and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-to-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage. ETC Usage Notes: The ETC transaction sensing range is 8 meters. When encountering a vehicle in front that has stopped, to prevent the ETC device of the vehicle in front from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle in front. The recognition speed for ETC lanes is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, leading to deduction failure. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield may cause poor sensing. Special attention is needed for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.

11

4

Share

How long after a downgrade due to drunk driving can an A2 driver's license be upgraded?

A2 driver's license after drunk driving downgrade, you must have three years of driving experience on the downgraded license before you can upgrade again. In addition to deducting 12 points, drunk driving also results in a six-month suspension of the license. Within thirty days after the deduction, you must go to the traffic management office to take the downgrade exam. The A2 driver's license will be downgraded to a B2 driver's license. If the driver does not complete the downgrade and license replacement within the specified time, the vehicle management office will announce the cancellation of the highest permitted driving model qualification. After completing the downgrade and license replacement, if the driver applies to reinstate the canceled permitted driving model, they must not have a record of 12 points deducted in the current scoring cycle and the most recent scoring cycle before the application, and must not have been involved in a fatal traffic accident where they bore equal or greater responsibility. The permitted driving model for an A2 license is a tractor, which can tow heavy and medium-duty full trailers/semi-trailers. Trailers are divided into two types: full trailers and semi-trailers. A full trailer bears its total weight entirely, while a semi-trailer shares part of its total weight with the tractor. Only drivers with an A2 license can drive such tractors; even drivers with an A1 license cannot drive tractors. To downgrade an A2 driver's license, you must go to the local vehicle management office. Before going, you need to bring your ID card and driver's license: 1. An A2 license downgrade will become a B1 or B2 license (i.e., B1 or B2 driver's license). The permitted driving model for an A2 license is a tractor, for a B1 license it is a medium-sized passenger vehicle, and for a B2 license it is a large truck. Other vehicle models that an A2 license can drive include: B1 (medium-sized passenger vehicle), B2 (large truck), C1 (small car), C2 (small automatic transmission car), C3 (low-speed cargo vehicle), C4 (three-wheeled car), M (wheeled self-propelled machinery vehicle). Article 68 of the new traffic regulations states: Drivers holding licenses for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks must have their highest permitted driving model qualification canceled by the vehicle management office under the following circumstances, and the driver must be notified to complete the downgrade and license replacement within thirty days: Being involved in a traffic accident resulting in death and bearing equal or greater responsibility, without constituting a crime. Having a record of 12 points deducted in a scoring cycle. Not participating in the inspection for three consecutive scoring cycles. The full name of the driver's license is the motor vehicle driver's license, also known as a "driver's license." It is the certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily could lead to traffic accidents. Generally, people without a license cannot drive on the road. However, for those who have mastered safe driving skills, the document that allows them to drive on the road is the "driver's license." This indicates that a driver's license is a "permit." The permission to drive a vehicle is granted through the issuance of a driver's license. This shows that obtaining a driver's license is a formal process that must be carried out by a specialized authority. Internationally, a driver's license is defined as: "A document issued by the competent authority permitting the holder to drive a motor vehicle." In China, a driver's license is defined as: A motor vehicle driver's license is a legal document issued by the management department to individuals who have learned to drive a motor vehicle, mastered traffic regulations and driving skills, and passed the required exams, permitting them to drive a specific type of motor vehicle.

14

0

Share

How often should a car over 6 years old be inspected?

Should the Handbrake Be Applied When Changing Tires?

Is it correct for vehicles to drive on the right side in China?

What are the new regulations for vehicle annual inspection in November 2020?

Can You Make a U-Turn Over Yellow Solid and Dashed Lines?

Can a non-owner apply for ETC for a vehicle?

How long after a downgrade due to drunk driving can an A2 driver's license be upgraded?

Is the Infiniti Q70 an imported model?

What is the difference between a D license and an E license?

What is the automotive ECM module?

Is it normal for a new car to have 11 kilometers on it?