How often should a 72v battery be replaced?

How to open the hood of a Mercedes-Benz C-Class?

To open the hood, follow these steps: 1. Pull the handle located on the left side of the driver's compartment to release the first lock of the hood. Then, proceed to unlock the second latch to fully open the hood. 2. There is a red lever under the driver's side; pull it forward to release the hood. Functions of the hood: 1. Airflow guidance: The shape of the hood effectively adjusts the direction of airflow relative to the car's movement and reduces the impact of air resistance, minimizing the effect of airflow on the vehicle. 2. Protection for the engine and surrounding components: By enhancing the strength and structure of the hood, it effectively prevents adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. Aesthetics: The exterior design of a vehicle is a direct reflection of its value. As a key component of the overall appearance, the hood plays a crucial role in enhancing visual appeal and embodying the concept of the car. 4. Improved driver visibility: The shape of the hood helps adjust the direction and form of reflected light, reducing glare and its impact on the driver. 5. Safety: The hood acts as a protective shield, effectively blocking damage caused by explosions, isolating air, and preventing the spread of flames, thereby reducing the risk and extent of fire damage.

16

1

Share

What is the service life of a pickup truck?

In China, pickup trucks are classified as light-duty trucks with a mandatory scrappage period of 10 years. However, this can be extended upon application for up to 5 additional years, during which the vehicle must undergo biannual inspections. This means a pickup truck can be used for a maximum of 15 years before compulsory scrappage. Below is relevant information: 1. Pickup Truck: A transliteration of the American term, also known as a car-truck, combining features of both. It is a light-duty truck with an open cargo area behind the cab, integrated with the cab. Essentially, it's a passenger-cargo vehicle with a car-like front and a cargo box at the rear. 2. Functional Advantages of Pickup Trucks: Firstly, they combine the dual characteristics of family vehicles and commercial vehicles (passenger-cargo dual-purpose), serving as practical tools for both work and home. Secondly, their diverse configurations (two-door or four-door, long or short cargo bed, two-wheel or four-wheel drive, gasoline or diesel engines) cater to a wide range of needs. Compared to sedans, they offer better load capacity and off-road capability; compared to light and mini trucks, they provide superior safety and driving comfort.

4

2

Share

Does a Broken Half Shaft Affect the Car?

If the half shaft is damaged, the car may experience minor issues like abnormal noises and bumps when running, or severe problems such as inability to move, causing the car to deviate from its path or shake violently. Below are the relevant details: 1. Damage to the half shaft: Initially, it is usually caused by the rupture of the rubber dust cover on the inner or outer CV joint, allowing road dust and debris particles to enter the CV joint lubrication surface. At the same time, the lubricating oil inside the CV joint is completely thrown out, leading to dry friction damage on the inner and outer CV joint ball surfaces. Generally, if you hear a rattling sound from the left front wheel when turning the steering wheel fully to the left, it indicates damage to the left outer CV joint. Conversely, it indicates damage to the right outer CV joint. 2. Side-to-side swaying: When the car is driving straight at a speed of 70-80 km/h, if you notice a side-to-side swaying or shaking sensation in the front part of the car, especially accompanied by a metallic impact sound during sudden acceleration, but the steering wheel feels normal, and there are no abnormalities when releasing the throttle or coasting, this indicates damage to the inner CV joint of the half shaft. In this case, the entire half shaft assembly needs to be replaced.

9

2

Share

What are daytime running lights?

Daytime running lights are installed at the front sides of a vehicle to signal its presence during the day, making the vehicle more noticeable to others. Here are some additional details about daytime running lights: 1. Daytime running lights are not for illumination but serve as signal lights. 2. While adding daytime running lights can make a car look cooler and more stylish, their primary purpose is not aesthetics but to enhance the vehicle's visibility. Additional information: 1. When overtaking, a motor vehicle should activate the left turn signal in advance, switch between high and low beams, or sound the horn. 2. During nighttime encounters with oncoming vehicles, drivers should switch to low beams when the distance to the opposite vehicle is more than 150 meters. 3. When encountering non-motor vehicles on narrow roads or bridges, drivers should use low beams. 4. When turning left, drivers should turn from the left side of the intersection center point, activate the turn signal during the turn, and use low beams when driving at night. 5. When driving at night without streetlights, under poor lighting conditions, or in low-visibility situations such as fog, rain, snow, dust, or hail, motor vehicles should turn on the headlights, position lights, and taillights.

8

3

Share

What is the normal RPM for an automatic transmission car?

Automatic transmission cars typically operate at a normal RPM range of 1800 to 2000 rpm. The engine RPM is directly related to the number of work cycles per unit time or the effective power output of the engine. In other words, the engine's effective power varies with different RPM levels. Therefore, when specifying the effective power of an engine, the corresponding RPM must also be indicated. An automatic transmission generally refers to a car's automatic gear-shifting mechanism. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's RPM and load, replacing the driver's subjective judgment of timing and gear-shifting operations. Most automatic transmission cars have six gear positions, arranged from top to bottom as: P, R, N, D, S, L.

20

0

Share

What are the reasons for the failure of the power-folding function of the rearview mirror?

Common reasons for the failure of the power-folding function of the exterior rearview mirror are as follows: 1. The battery is disconnected or dead: The exterior rearview mirror must be reset to function properly. The specific reset method is to manually operate the folding button. 2. Manual folding: The next time the vehicle is unlocked, the exterior rearview mirror will not automatically unfold. You need to enter the vehicle and press the button on the door to manually unfold the exterior rearview mirror. 3. Other reasons: Focus should be placed on checking mechanical and electronic control issues. Additional information: The purpose of the power-folding rearview mirror is that, as the widest component installed on the vehicle, it is most susceptible to impact in the event of a collision. To minimize scratches, the rearview mirror needs to have a folding function.

11

3

Share

How often should a 72v battery be replaced?

How to open the hood of a Mercedes-Benz C-Class?

What is the service life of a pickup truck?

Does a Broken Half Shaft Affect the Car?

What are daytime running lights?

What is the normal RPM for an automatic transmission car?

What are the reasons for the failure of the power-folding function of the rearview mirror?

What are the models of oil nozzles?

Where is the center point of the wiper?

What Do Different Colored Parking Lines Mean?

Is a small car driver's license exempt from inspection for six years?