How Often Should a 5-Seater MPV Undergo Vehicle Inspection?

2 Answers
TylerLynn
08/29/25 2:20am
5-seater MPVs are subject to different inspection frequencies depending on whether they are used for commercial or private purposes: 1. Commercial 5-seater MPVs: Annual inspection for vehicles under 5 years old; semi-annual inspection for vehicles over 5 years old. 2. Private 5-seater MPVs: Exempt from annual inspection for the first 6 years; annual inspection for vehicles over 6 years old; semi-annual inspection for vehicles over 15 years old. Below are the inspection schedules for various vehicle types: 1. Commercial passenger vehicles: Annual inspection for vehicles under 5 years old; semi-annual inspection for vehicles over 5 years old. 2. Trucks and large/medium-sized non-commercial passenger vehicles: Annual inspection for vehicles under 10 years old; semi-annual inspection for vehicles over 10 years old. 3. Small and mini non-commercial passenger vehicles: Biennial inspection for vehicles under 6 years old; annual inspection for vehicles over 6 years old; semi-annual inspection for vehicles over 15 years old. 4. Motorcycles: Biennial inspection for vehicles under 4 years old; annual inspection for vehicles over 4 years old. 5. Tractors and other motor vehicles: Annual inspection.
Was this review help?
13
0
Share
EzraLee
09/10/25 7:05am
I've been driving this 5-seater MPV for over a decade, and I've noticed significant changes in the annual inspection rules. When the vehicle was new, for the first 6 years it only required biennial paperwork submission to obtain the inspection sticker without actual testing. After 6 years entering middle age, it needed biennial on-site inspections for brakes, lights etc. Once exceeding 10 years, annual inspections became mandatory. I remember older vehicles used to require exhausting semi-annual inspections - the current relaxed policy is much more convenient. Before each inspection I always check tire pressure and headlights in advance to avoid disqualification. Proper maintenance makes inspections easier, which is crucial for road safety - especially when traveling with family, as brake system failures are no joking matter.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Warning Light on a Magotan?

The method to reset the tire pressure warning light on a Magotan is as follows: After addressing the tire pressure issue, first turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Tire pressure monitoring automatically and continuously checks the tire pressure while driving, alerting the driver to leaks or low pressure to ensure driving safety. There are three commonly used methods of tire pressure monitoring: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between the tires, the system monitors the tire pressure. Essentially, the indirect tire pressure warning system relies on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both systems mentioned above. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only a direct system, this hybrid system reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.
17
0
Share

Can Rubber Water Remove Paint?

Rubber water can remove paint. Here are some related introductions about rubber water and paint: 1. Reason: Rubber water is an organic solvent, so it can clean off paint. 2. Methods to remove paint: If the paint is not dry, you can also use kerosene, gasoline, banana oil, or xylene to repeatedly scrub (remember to wear rubber gloves to protect your skin), and finally rinse several times with clean water to remove it. If the paint is freshly stained and not yet dry, the best method is to apply cooling oil on both sides, wait about 2 minutes, and then use a cotton ball to scrub along the fabric's grain, which works very well.
9
3
Share

What are the regulations on the depreciation period for passenger cars?

The depreciation period for passenger cars is 5 years, with a stipulated residual value rate of 5%. Below are the relevant details regarding the depreciation period regulations: 1. Depreciation regulations: The tax law specifies the following minimum depreciation periods for fixed assets: 20 years for houses and buildings; 10 years for trains, ships, machinery, mechanical equipment, and other production equipment; 5 years for electronic equipment, transportation vehicles other than trains and ships, as well as appliances, tools, and furniture related to production and operation. The residual value ratio is uniformly set at 5% of the original price. 2. Used car depreciation regulations: The depreciation period is also calculated from the date of purchase and is set at 5 years.
5
0
Share

Which gear to use for long downhill descents?

Automatic transmission vehicles can use the D gear for downhill driving, or the L gear if available. Below are relevant introductions about downhill gears: 1. Reason for using L gear: When descending mountains or long-distance slopes, shifting to the L gear restricts the car to the lowest gear (equivalent to first gear in a manual transmission car), allowing the vehicle to use engine braking during descent. This prevents the driver from having to continuously apply the brakes, which could overheat the brake pads and pose a danger. 2. Precautions: When driving an automatic transmission, remember not to shift to neutral at red lights or during downhill descents. Instead, keep the car in the forward gear and control the speed using the gear and brakes to avoid accidents.
7
2
Share

What is the removal method for the Geely Vision wiper?

Geely Vision wiper removal method is as follows: 1. Pull the wiper blade assembly away from the windshield. 2. Rotate the wiper blade in the direction of the arrow to remove the Vision wiper. Here is related content introduction: There are roughly two types of wipers. One is the traditional intermittent type, with three to four segments, adjusted by the driver according to rain conditions and visibility. The other is rain-sensing type, which has been increasingly used in mid-to-high-end models in recent years. High-quality wipers must have characteristics such as heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, good windshield adhesion, reduced motor burden, low noise, strong water repellency, and soft material to avoid scratching the windshield, ensuring clear visibility.
14
3
Share

How Long Does It Take to Learn Car Detailing?

Generally, it takes 2 to 3 months. Tasks include washing the entire vehicle body, polishing the vehicle, and cleaning the interior. Car detailing apprentices typically need three months of training to reach the beginner level. For the intermediate level, thorough cleaning of interior plastic parts and leather seats, as well as waxing and maintenance, are required. Advanced skills include installing undercarriage armor, performing deep engine cleaning, maintaining various internal components, and servicing the transmission and rear axle. Car detailing requires strong technical support. If possible, it's beneficial to complete the training on-site. Car detailing is a highly profitable industry. Similar to beauty and hairdressing, it requires relatively low investment but offers significant potential for growth.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.