How Often is the Motor Vehicle Inspection Cycle?

1 Answers
VonReese
07/25/25 5:12pm
Motor vehicle inspections are conducted once a year. Here are the relevant details: 1. Passenger vehicles for operation: Passenger vehicles for operation must be inspected once a year within the first 5 years, and every 6 months thereafter. 2. Trucks and large or medium-sized non-operational passenger vehicles: Trucks and large or medium-sized non-operational passenger vehicles must be inspected once a year within the first 10 years, and every 6 months thereafter. 3. Small and mini non-operational passenger vehicles: Small and mini non-operational passenger vehicles must be inspected once every 2 years within the first 6 years, once a year thereafter, and every 6 months after 15 years. 4. Motorcycles: Motorcycles must be inspected once every 2 years within the first 4 years, and once a year thereafter. 5. Special school buses: Special school buses must undergo a safety technical inspection every 6 months from the date of registration. 6. Other motor vehicles: Other motor vehicles must be inspected once a year.
Was this review help?
16
0
Share
More Forum Discussions

Is it necessary to replace the oil filter when changing the engine oil?

It is necessary to replace the oil filter when changing the engine oil. Here is the relevant content introduction: 1. The oil filter can filter out impurities in the engine oil flowing through the lubrication system. After the engine operates for a period of time, some impurities will be produced. These impurities mainly fall into two categories: one is metal shavings worn off from engine parts during operation, and the other is black sludge-like organic matter produced by chemical changes when the engine oil is in a high-temperature state during engine operation. These impurities will mix with the engine oil and circulate through the lubrication system. 2. The filtering performance of the oil filter will weaken over time until it fails. Road dust and high-temperature-oxidized carbides mix with moisture and enter the engine oil, and these useless substances are filtered by the oil filter.
20
2
Share

Where Can I Inflate My Car Tires If the Pressure Is Insufficient?

You can inflate your car tires at auto repair shops or 4S stores if the tire pressure is insufficient. Here is the relevant information: Tire pressure refers to the air pressure inside the tires. The hazards of insufficient tire pressure are as follows: 1. Increases the friction coefficient with the road surface. 2. Causes the steering wheel to feel heavy and prone to deviation. 3. Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heating of the tire. 4. Reduces the functionality of the cords and rubber, causing delamination or cord breakage, and excessive friction with the wheel hub, resulting in damage to the bead area. 5. May lead to tire blowouts during high-speed driving. 6. Increases the tire's contact area with the ground, accelerating wear on the tire shoulders.
17
1
Share

Can You Make a U-Turn in a Highway Service Area?

U-turns are not allowed in highway service areas, and the entire highway prohibits U-turns. To make a U-turn, you must exit at the next interchange and then turn around. Important considerations for highway driving include: 1. Both the driver and front-seat passenger must fasten their seat belts, and the driver should not use a mobile phone; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily—always use turn signals in advance when changing lanes or overtaking; 4. Only use adjacent lanes for overtaking, and return to the original lane immediately after overtaking. Do not drive straddling or pressing against lane dividers; 5. No reversing, driving against traffic, crossing the central divider for U-turns or turns, test driving, or operating a training vehicle. Do not overtake or park on ramps; 6. Maintain a following distance of at least 100 meters. When speed is below 100 km/h, the distance can be appropriately reduced but should never be less than 50 meters.
12
5
Share

What Causes the Steering Wheel to Shake When Braking?

The reasons for the steering wheel shaking when braking are: 1. Brake disc failure; 2. Wheel hub damage. The function of the brake is to reduce speed or bring the vehicle to a stop. Its working principle involves converting the kinetic energy of the moving vehicle into heat energy through the friction between the brake pads and the brake drum, as well as between the tires and the ground, thereby slowing down or stopping the vehicle. The causes of brake failure include: 1. Impurities in the brake master cylinder or poor sealing; 2. Failure of the vacuum booster pump; 3. Contaminated brake fluid; 4. Leakage in the brake master cylinder or wheel cylinder; 5. Air leakage from the air reservoir or pipeline connections; 6. Severe overloading; 7. Carbonization of the brake drum; 8. Insufficient brake fluid in the brake master cylinder; 9. Wear of the piston in the brake master cylinder.
20
4
Share

What type of fire extinguisher is used for vehicles?

Vehicle fire extinguishers use dry powder or water-based types, and their storage environment temperature should be within the range of -10 to 45 degrees Celsius. The placement location should be kept dry and ventilated to prevent the fire extinguisher from becoming damp and corroding. Fire extinguishers are divided into: 1. Aerosol fire extinguishers; 2. Dry powder fire extinguishers; 3. Ultra-fine dry powder fire extinguishers; 4. Carbon dioxide fire extinguishers; 5. Water-based fire extinguishers. The method of using a fire extinguisher is: 1. Bring the fire extinguisher to a location near the fire and stand on the upwind side of the fire; 2. Pull out the safety pin; 3. Hold the spray nozzle firmly with one hand; 4. Squeeze the handle tightly with the other hand; 5. Aim the nozzle at the base of the flames and sweep.
18
1
Share

What to Do When the Tire Pressure Monitor Alarms?

The solutions for a tire pressure monitor alarm are: 1. Check if the tire has been punctured by a nail; 2. If the tire is low on air, promptly replenish the tire pressure. The functions of the tire pressure monitor are: 1. It will promptly alarm when the tire is punctured, causing rapid or slow air leakage; 2. It will alert to prevent a tire blowout when tire looseness leads to uneven friction, causing the tire temperature to reach 70 degrees Celsius; 3. It will alarm when the tire pressure is below the vehicle's set limit due to prolonged lack of inflation, preventing low pressure from causing a temperature rise and subsequent tire blowout. The method to reset the tire pressure monitor is: 1. Ensure the vehicle's tire pressure is within the normal range; 2. Park the vehicle on a level surface and turn off the engine; 3. Power on the vehicle, press and hold the tire pressure monitor button, and after 5 seconds, release the button upon hearing an alarm sound to successfully reset.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.