How often is the annual inspection for new passenger cars?

2 Answers
ColeLee
07/29/25 8:39am
New passenger cars require an annual inspection every 2 years. The inspection items include: 1. Checking whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced, and whether they match the initial inspection records; 2. Testing whether the vehicle's braking performance, lighting, exhaust, and other safety features comply with relevant regulations; 3. Verifying whether the vehicle has been modified, remodeled, or altered, and whether the driving license, license plate, and all vehicle registration records match the actual condition of the vehicle; 4. Checking for any damage, alterations, or illegible characters on the license plate, driving license, and the enlarged license plate characters printed on the vehicle, and determining whether replacement is necessary.
Was this review help?
9
1
Share
KayleeAnn
08/11/25 6:13pm
I have some insights about new car annual inspections. For the first 6 years, small passenger cars don't need to queue up for on-site inspections, which saves time and effort. However, you must remember to apply for the inspection decal every two years, which can be done online or at the vehicle management office. If you forget to get the decal during this period, you might face fines and penalty points. After the car reaches 6 years old, you can't slack off anymore - it requires annual on-site inspections to check critical components like brakes and lights. For vehicles over 10 years old, it's even stricter with biannual inspections to prevent safety issues with aging cars. When I drove a new car, I maintained it regularly along with the inspections - this saves money and ensures peace of mind on the road. Don't wait until problems arise to deal with them.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How to Replace the Fuel Filter?

Fuel filter replacement method is as follows: 1. Remove the vehicle key, disconnect the fuel pump fuse or power supply, remove the rear seat cushion and the cover on the fuel pump to expose the fuel pump assembly. The assembly is secured by a black retaining ring. After disconnecting the electrical connector and fuel lines on the pump, use special tools to remove this retaining ring. The fuel pump assembly can then be extracted after removing the ring. 2. Replace corresponding components on the old fuel filter with new fuel filter assembly parts. 3. Reinstall the fuel pump assembly with the new fuel filter back into the fuel tank. It's recommended to apply Vaseline on the fuel pump's sealing ring for lubrication to prevent distortion and potential fuel or vapor leaks. Then install the pump's retaining ring and tighten it to the torque specification in the service manual. Finally, reconnect the electrical connector and fuel lines, then conduct a leak test. If no leaks are found, reinstall the seat; otherwise, reseal the gasket. 4. Reinstall the replaced fuel pump assembly to its original position. Reconnect the fuel line and replace the cover to complete the process.
12
4
Share

Can the MG6 be upgraded from low-end to high-end exhaust?

The MG6 can be upgraded from low-end to high-end exhaust. Automotive exhaust systems: Generally can be divided into three sections: the header, mid-section, and tail section. Exhaust header: Commonly seen in performance modifications. Due to the presence of the catalytic converter, the exhaust flow is significantly restricted, which also somewhat limits the engine's high-rpm power output. Therefore, race cars typically remove the catalytic converter entirely or replace it with a high-flow catalytic converter. Exhaust mid-section: Similar in structure and function to the tail section, but while providing sound dampening, the mid-section also plays a role in maintaining exhaust gas pressure since it's closer to the engine valves. Exhaust pressure directly affects the engine's low-end torque performance. Exhaust tail section: Primarily responsible for noise reduction, with a significant portion of engine exhaust noise being eliminated at this stage.
8
1
Share

Will the traffic police intervene if the brake light is modified to flash?

If the traffic police discover that the brake light has been modified to flash, they will intervene. Below is relevant information about modifying brake lights to flash: 1. Unauthorized vehicle modification is illegal unless there is a relevant application. If a flashing light is installed without permission, the traffic police have the authority to impose penalties. Unauthorized alteration of vehicle components may result in an order to remove the modification within a specified time. Repeated violations may lead to forced removal and fines. Flashing brake lights are considered illegal modifications and pose significant safety hazards. According to the "Technical Conditions for Motor Vehicle Operation Safety," brake lights are explicitly prohibited from flashing, and vehicle owners are not allowed to modify external lighting and signal devices. 2. Article 16 of the "Road Traffic Safety Law" stipulates that no unit or individual may assemble a motor vehicle or alter its registered structure, construction, or characteristics without authorization. Article 97 of the "Road Traffic Safety Law" states that illegally installed alarms or marking lights will be forcibly removed and confiscated by the traffic management department of the public security authorities.
4
4
Share

Why does the Audi A6L's fan start running continuously upon startup?

Audi A6L's fan running continuously upon startup is due to a malfunction in the car's fan control system. Below is an introduction to the car's fan system: Solutions for fan system malfunctions: If the car's fan control system is malfunctioning, it is necessary to promptly visit a 4S shop or a repair shop to inspect and repair the car's fan control system to resolve the issue of the fan running continuously. The radiator fan's activation is not time-dependent but rather depends on the coolant temperature. When the coolant temperature reaches 98 degrees Celsius, the radiator fan will automatically turn on. The car's radiator fan is automatically activated and cannot be manually controlled. It does not start at low temperatures, and at medium to high temperatures, it operates at two speed levels. Generally, it automatically activates at medium speed when the temperature reaches 95 degrees Celsius. The role of the car's fan system: The engine cooling fan is a crucial component of the vehicle's cooling system. The fan's performance directly affects the engine's heat dissipation efficiency, which in turn impacts the engine's performance. If the fan is improperly selected, it can lead to insufficient or excessive engine cooling, resulting in a deterioration of the engine's working environment and affecting the engine's performance and lifespan.
1
1
Share

What is the reason for the abnormal noise in the B-pillar of the Haval H2?

Haval H2 B-pillar abnormal noise is caused by issues such as the air filter, spark plugs, ignition wires, gasoline, gasoline filter, carburetor, and fuel pump. The following is an introduction to B-pillar abnormal noise: Reasons for B-pillar abnormal noise: If the abnormal noise comes from the co-pilot side B-pillar, you can fasten the seat belt even when there is no one in the co-pilot seat to check if it is caused by the collision between the metal buckle of the seat belt and the plastic plate below the B-pillar. Solutions for B-pillar abnormal noise: The impact sound caused by the excessive gap between the inner side of the B-pillar plastic cover plate and the B-pillar steel plate, or the slight deformation of the B-pillar leading to friction noise between the B-pillar plastic cover plate and the steel plate. According to the manufacturer's measures, fill the cavity foam in the place where the noise occurs, stick 3M foam tape on the inner side of the B-pillar plastic cover plate, and tighten the loose buckles inside the B-pillar plastic cover plate after disassembling it.
15
4
Share

What are Full-Time 4WD and On-Demand 4WD?

Full-Time 4WD and On-Demand 4WD are explained as follows: 1. Full-Time 4WD: Full-Time 4WD means that the vehicle is always powered by all four wheels independently. It achieves this through a flexibly connected center differential, which then distributes driving force to all four tires via independent front and rear axle differentials. Unlike purely mechanical differential locks, Full-Time 4WD differentials can be either viscous coupling or multi-plate clutch types, but both allow for speed differences between front/rear and left/right wheels. Whether a vehicle has Full-Time 4WD depends entirely on the transfer case design. As the core component managing different drive modes, the transfer case significantly influences overall vehicle performance. 2. On-Demand 4WD: On-Demand 4WD automatically switches to four-wheel drive only when necessary, otherwise operating in two-wheel drive. The system automatically shifts between 2WD and 4WD modes based on road conditions without driver intervention. This differs from Part-Time 4WD which requires manual switching, and Full-Time 4WD which always powers all four wheels.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.