···
Log in / Register

How often does the Baojun 530 require its first maintenance?

4 Answers
VonCharlie
07/24/25 8:00am
Baojun 530's first maintenance is due at 3 months or 5,000 kilometers, whichever comes first. The first maintenance for a new car generally includes the following items: 1. Check tire wear condition and determine if pressure adjustment is necessary; 2. Inspect the entire lighting system: headlights, indicators, emergency signal lights, trunk light, cabin lights, glove box light, dashboard warning lights; 3. Check the operation of the windshield wipers, their positioning, and wear condition; 4. Inspect the exterior of the body, underbody protective components, pipes, and rubber parts; 5. Check the condition of various control belts; 6. Inspect and adjust the handbrake travel; 7. Tighten chassis screws, as driving may cause unavoidable impacts, leading to loosened screws.
Was this review help?
5
3
Share
LeEverly
08/11/25 12:57am
I remember clearly that the first maintenance for the Baojun 530 is usually at 5,000 kilometers or around six months after taking delivery of the car, whichever comes first. Back then, when my new car reached 4,800 kilometers, I went to the 4S shop for the first maintenance. The receptionist directly checked the VIN and started the service. The first maintenance mainly involves changing the engine oil and oil filter, checking the tires and brake pads, and updating the system data for you. Don’t delay it for too long because the engine break-in process generates some metal debris, and changing the oil early is good for the car. If you exceed the specified period, some 4S shops may cancel the free first maintenance policy, which would be a big loss.
Was this review help?
20
5
Share
Expand All
VonAiden
09/24/25 8:40am
A friend who just bought a Baojun 530 asked me about the first maintenance. Indeed, this car requires its first service at either six months or 5,000 kilometers, whichever comes first. The key point is that during the break-in period of a new car, engine components need to break in, and engine oil consumption is relatively fast. I've seen people who went for the first service after just three months, but the 4S staff said it's unnecessary to do it so early, as long as it's within the six-month period. The first maintenance items are basically standardized operations, including an oil change, oil filter replacement, and a full vehicle inspection, taking about forty minutes in total.
Was this review help?
17
4
Share
Expand All
AxelRose
11/08/25 4:02am
The Baojun 530 manual clearly states: The first maintenance is at 5,000 kilometers or six months after purchase. I suggest not being too concerned about fuel costs for a new car and driving more in the first 2,000 kilometers to reach the first maintenance mileage as soon as possible. After all, engines are much more precise now, but the factory oil contains special additives specifically for the break-in period. After the first maintenance, you'll feel smoother power output, and fuel consumption will decrease slightly. Remember to bring the purchase invoice and maintenance manual for the free first maintenance. Last time, I forgot the manual and had to go back home to get it, which wasted time.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

Why are Sentury tires not available on the market?

In fact, Sentury tires are available on the market, and car owners can purchase them on some e-commerce platforms. Here is some relevant information: Introduction: Qingdao Sentury Tire Co., Ltd. – Headquartered in Qingdao, China, the company is dedicated to the research, development, and production of green, safe, high-quality, and high-performance semi-steel radial tires and aviation tires. Brands: The company owns four major tire brands: Sentury (SENTURY), Landsail (LANDSAIL), Delinte (DELINTE), and Groundspeed (GROUNDSPEED). Currently, it has established two tire production bases in Qingdao, China, and Thailand. The Qingdao factory has a designed production capacity of 12 million semi-steel radial tires, while the Thailand factory has a designed production capacity of 10 million semi-steel radial tires.
14
2
Share

Is a Fuel Consumption of 17 L/100km Normal for a New Car?

A fuel consumption of 17 L/100km is not normal for a new car. Here are some important considerations for using a new car: Avoid overloading: Carrying too much weight during the break-in period can damage mechanical components. The power transmission parts of a new car have not yet fully worn in, and aggressive acceleration can cause irreversible damage. Therefore, it is essential to follow the principle of "slow and steady" during the break-in period. Speed limits for new cars: Domestic cars are generally limited to 40~70 km/h, while imported cars are usually limited to 100 km/h. When the throttle is fully open, the speed should not exceed 80% of the maximum speed. The recommended engine speed during the break-in period is between 2000~4000 rpm.
6
1
Share

What are the brand models under the Toyota brand?

Toyota Group's brand models are as follows: Lexus: Lexus (LEXUS) is a globally renowned luxury car brand under the Japanese Toyota Group. Founded in 1983, it took only a little over a decade to surpass the sales of Mercedes-Benz and BMW in North America. The origin of Lexus cars stems from Toyota's need for another breakthrough in 1983, which was whether it could create a luxury car to challenge the top-tier market. Scion: This Scion is not the one from LOL. Scion is the youngest car brand globally, representing the advent of the personalized car era. Through a newly established dealership system, every car owner will have the opportunity to experience Scion's meticulously designed personalized car buying process and purchase a unique, personalized Scion car.
11
5
Share

How many points are deducted for reversing on an urban elevated road?

Reversing at an elevated road entrance will result in a fine and a one-time deduction of 12 points. The following are the penalties for reversing on highways and the regulations stipulated in national traffic laws and regulations: Penalties for reversing on highways: This regulation also applies to penalties for reversing on highways. When driving on highways, motor vehicles are not allowed to reverse, drive in the opposite direction, make U-turns by crossing the central divider, or stop within the lane. Regulations in national traffic laws and regulations: The road traffic safety management of urban expressways shall be implemented with reference to the provisions of this section. Due to the good road conditions and high speeds on urban expressways and highways, reversing or driving in the opposite direction can easily lead to fatal traffic accidents. If a traffic accident occurs, the perpetrator will be fully responsible.
13
2
Share

Why is there no video signal in the car reversing camera?

The reasons for no video signal in the car reversing camera are as follows: Prolonged use of the reversing camera: Due to prolonged use of the reversing camera, the chip's light-sensing effect deteriorates, not only causing a lot of snowflake-like interference but also leading to the no-signal phenomenon mentioned today. Of course, it could also be due to defects in the car's circuit design. However, such chip abnormalities and design defects are rare. Poor contact: Focus on checking the connectors and plugs, as these adapters are prone to poor contact. Or the video cable might be broken. Due to weather conditions like temperature changes or humidity, the video plug may corrode or have a loose connection, which could cause this problem. Many luxury cars also experience this phenomenon in winter. The wiring harness of the reversing camera runs from the dashboard all the way to the trunk, which is relatively long. Any poor contact in the wiring harness or plug can cause malfunction.
10
1
Share

How Long Does Vehicle Inspection Take at the DMV?

It usually takes about one hour. The new vehicle inspection process at the DMV is as follows: Photography: The photographer will set up the number plate based on the last four digits of the VIN and place it at the lower right corner of the windshield, then take photos of the vehicle. Before photography, the "CCC" sticker and "Vehicle Fuel Consumption Label" affixed to the windshield must be removed. It's best to complete this task before arriving at the DMV, as these two stickers can be difficult to peel off. Rubbing: Rubbing is typically performed in the DMV inspection area. Sometimes the 4S shop may have already done the rubbing, but it's important to check whether they have provided the correct number of copies, as the license plate registration requires two copies of the engine number and three copies of the VIN rubbing.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.