How often does an A2 driver's license require an annual review?

1 Answers
LaDerek
07/25/25 1:10pm
A2 driver's license requires an annual review, but if there is no demerit record within a scoring cycle, the review for that cycle is exempted. Below are the relevant details: 1. Article 70: Motor vehicle drivers shall, in accordance with the provisions of laws and administrative regulations, regularly undergo reviews at the traffic management departments of public security organs. 2. When motor vehicle drivers renew their driver's licenses in accordance with Articles 57 and 58 of these regulations, they shall undergo reviews by the traffic management departments of public security organs. 3. Drivers holding licenses for large buses, tractors, urban buses, medium-sized buses, or large trucks shall undergo reviews at the traffic management departments of public security organs within 30 days after the end of each scoring cycle. However, if there is no demerit record within a scoring cycle, the review for that cycle is exempted.
Was this review help?
20
3
Share
More Forum Discussions

What is the minimum ground clearance of the CR-V?

The 2020 CR-V Classic model has a minimum ground clearance of 135MM. Below is detailed information about the 2020 CR-V: 1. The 2020 CR-V is a city classic SUV model produced by Dongfeng Honda. The mid-to-high trim models have a minimum ground clearance of 137MM. Minimum ground clearance refers to the distance between the lowest protruding part of the chassis and the level ground when the vehicle is fully loaded, reflecting the car's ability to pass over obstacles or uneven ground without collision. 2. The 2020 CR-V features a stylish and dynamic exterior with smooth and rounded yet sporty lines. The interior adopts the same LCD instrument panel as the new Civic and a three-spoke multifunction steering wheel. In terms of power, it continues to be equipped with a 1.5T turbocharged engine, delivering a maximum power of 193 horsepower and a peak torque of 243 Nm, paired with a 6-speed manual or CVT continuously variable transmission.
13
0
Share

How to Turn Off the Rear Wiper of Audi Q3?

Audi Q3 rear wiper can be turned off as follows: The wiper switch is located below the right side of the steering wheel. Simply toggle it according to the instructions to turn off the wiper. OFF means off, low means low speed, and high means high speed. You can adjust the wiper speed according to the intensity of the rain. Below is an introduction to the wiper: 1. The wiper assembly includes a motor, reducer, four-bar linkage structure, wiper arm spindle, and wiper blade assembly. When the wiper switch is pressed, the motor starts, and the motor's speed drives the swing arm through the speed reduction and torque increase of the worm gear. The swing arm drives the four-bar linkage, which in turn drives the shaft installed on the front bulkhead to swing left and right. Finally, the shaft drives the wiper blade to sweep the windshield. 2. The power source of the wiper comes from the motor, which is the core of the entire wiper system. The wiper motor adopts a 3-brush structure for easy speed change. The intermittent time is controlled by the intermittent relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charge-discharge function to make the wiper sweep at a certain interval. 3. Generally, there is a wiper control knob on the car's combination switch handle, with three positions: low speed, high speed, and intermittent.
15
3
Share

What engine is equipped in the Accord?

Honda Accord is equipped with a 1.5T turbocharged engine. The maximum power reaches 194 horsepower, and the peak torque is 260 N·m, paired with a CVT continuously variable transmission for smoother gear shifting. It also demonstrates good performance in fuel economy, with a compact engine compartment layout that makes efficient use of space. Below is an introduction about the engine: 1. The quality of fuel combustion in the engine can be determined from the exhaust pipe. If water droplets fall from the exhaust pipe, it indicates complete fuel combustion, maximizing fuel utilization and reflecting fuel economy. If there is a strong oil smell, it might indicate oil burning. If large amounts of black smoke are produced along with a strong exhaust odor, it could mean the air-fuel mixture is too rich. Therefore, the gases emitted from the exhaust pipe can directly reflect whether the engine combustion is complete and indirectly indicate the internal precision and performance of the engine. 2. Besides judging from the exhaust pipe, you can also observe whether the engine idles smoothly and whether there is a jerky feeling during acceleration. Generally, the more precise the internal structure of the engine, the less noticeable the vibration, and the lower the noise.
15
2
Share

What Causes Engine Vibration While Driving?

Engine vibration can occur due to six main reasons. Here are the detailed causes of engine vibration: 1. Engine Mounts: These are rubber blocks placed between the engine and the frame to reduce vibrations and shocks during engine operation, as well as to secure the engine. If the mounts become worn or loose, engine vibration will become noticeably severe. 2. Engine Misfire: This refers to one or more cylinders not functioning properly. Symptoms include intermittent exhaust flow, severe shaking of the exhaust pipe, noticeable engine vibration, and sometimes a sputtering sound. This is often related to faulty ignition coils. 3. Carbon Buildup: This includes carbon deposits in the cylinders, throttle body, spark plugs, and intake system. These components are critical to engine power output. Excessive carbon buildup reduces ignition energy and intake efficiency, leading to engine vibration and sluggish acceleration. 4. Incorrect Fuel Octane Rating: Using a lower octane fuel (e.g., 90 instead of 93) can reduce engine power and performance. Alternatively, clogged fuel tank vents, fuel filters, or fuel lines between the tank and carburetor can restrict fuel supply, resulting in a lean air-fuel mixture and engine vibration. 5. Air Supply Issues: Air is a key component of engine power. A clogged air filter or insufficient airflow can create an overly rich air-fuel mixture, reducing engine power. For turbocharged vehicles, a malfunctioning turbocharger can also cause engine vibration during acceleration. 6. Cold Start Conditions: During a cold start, engine lubrication is less effective due to thicker, less fluid oil, leading to mechanical wear and noise. Lower coolant temperatures and a richer air-fuel mixture can result in incomplete combustion, causing engine vibration.
14
2
Share

How to reset the maintenance light on Honda URV?

Honda URV maintenance light reset method is as follows: 1. Turn off the ignition switch, insert the ignition key into the slot below the tachometer for reset. 2. Press and hold the button below the instrument panel on the right side of the steering column for 3 seconds to complete the reset operation. 3. Hold down the SELECT and RESET buttons on the right side of the combination meter, turn on the ignition switch, release the buttons after 10 seconds, and the reset is complete. The following is an introduction to the Honda URV: 1. The URV is a product of Dongfeng Honda. The URV continues Honda's family-style design, with the headlights and grille connected as one under the chrome trim, featuring almost identical headlight assemblies. At the rear, the URV adopts a full-width taillight design, giving it a more premium look. 2. Interior: The overall design is quite neat, with a relatively simple center console layout. Additionally, the new car features the same digital instrument cluster and three-spoke multifunction steering wheel as the all-new Civic. 3. Powertrain: The Honda URV is equipped with a 1.5T turbocharged engine, paired with either a 6-speed manual or CVT transmission; maximum power is 143KW (193PS), with a peak torque of 243N·m.
4
4
Share

What is the difference between left and right fuel tanks?

For automobiles, there is no difference whether the fuel tank is located on the left or right side. The following is an introduction to the position of the car fuel tank: 1. When refueling, the vehicle can be adjusted, so it is impossible to be unable to refuel due to the different positions of the fuel tank. 2. Regarding the position of the fuel tank, there is no international unified requirement, and there are no relevant legal requirements in China. The fuel tank can be on either the left or right side. 3. There are two types of driving rules in the world: left-hand traffic and right-hand traffic. In countries with left-hand traffic, the fuel tank opening is generally on the left side. Correspondingly, in countries with right-hand traffic, for the convenience of refueling, the fuel tank is generally on the right side. 4. In left-hand traffic countries, the driver's cab is on the right side, while in right-hand traffic countries, the driver's cab is on the left side. The fuel tank is located diagonally opposite the driver's cab, and the position of the fuel tank opening is arranged on the diagonal line of the driver's seat to avoid accidents during refueling.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.