How Often Are Vehicles Inspected Now?

1 Answers
OKendra
07/29/25 2:21pm
For the first time, vehicles are inspected every 6 years, and thereafter, they are inspected annually. Vehicle inspection refers to the annual examination of vehicles that have already obtained official license plates and registration certificates, conducted in accordance with the technical conditions for safe operation of motor vehicles. The purposes are: 1. To check the main technical conditions of the vehicle; 2. To enhance vehicle maintenance; 3. To ensure the vehicle remains in good condition and guarantees driving safety. The required documents for vehicle inspection include: 1. A copy of the compulsory traffic insurance policy; 2. The original vehicle registration certificate and road and bridge card; 3. The first copy of the road and bridge ticket; 4. A copy of the vehicle owner's ID card; 5. The vehicle itself. The vehicle inspection process consists of: 1. Exterior inspection; 2. Payment of inspection fees and information entry; 3. On-site inspection; 4. Receipt of on-site inspection results; 5. Verification of compulsory traffic insurance documents.
Was this review help?
20
2
Share
More Forum Discussions

How fast can a maximum horsepower of 156 run?

A maximum horsepower of 156 can reach around 200 km/h. There is no absolute correlation between top speed and engine horsepower, but speed and horsepower are generally proportional. However, this may vary for different cars. Introduction to horsepower: Horsepower is power, the work done per unit of time. In cars, horsepower determines speed, while torque determines strength. Therefore, in theory, the greater the horsepower, the faster the car can go. Factors affecting car speed: How fast a car can go depends on multiple factors, not just horsepower alone. Manufacturers set the maximum speed before the vehicle leaves the factory, ensuring it remains relatively controllable even at top speed. However, it is advised that owners do not attempt to reach the vehicle's maximum speed, as the car is almost on the verge of losing control at this point, which is extremely dangerous.
4
0
Share

Will a raised windshield wiper deflector cause water leakage?

A raised windshield wiper deflector will cause water leakage. Introduction: The windshield wiper (WINDSHIELD-WIPER) is a blade structure installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Function: Its main function is to clear rain, snow, and dust that obstruct the view on the windshield. Principle: The power source of the windshield wiper comes from the electric motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part.
7
5
Share

How Long Can You Delay Renewing Your Driver's License After It Expires?

You can extend the renewal process for up to three years. Reasons for extending the driver's license renewal: The conditions that need to be met are situations where the motor vehicle driver is unable to renew the license due to military service, being abroad, or other reasons. In such cases, an application for an extension can be submitted to the vehicle management office or the traffic administration authority where the driver's license was originally issued. Driver's license renewal timeline: The renewal period for a motor vehicle driver's license is six years after obtaining the license, at which point a ten-year license is issued. After the ten-year period, the license is replaced with a long-term valid driver's license, which does not require further renewals. The condition for this is that the driver must not accumulate 12 penalty points in any scoring cycle.
18
4
Share

Is Motorcycle Piston Slap Caused by the Crankshaft?

Motorcycle piston slap is not caused by the crankshaft. Piston slap refers to the lateral knocking of the piston against the cylinder wall, which is equivalent to a very high-frequency side-to-side oscillation. Piston Slap: Since the new piston and the old cylinder are not originally matched, even if they appear to be in good condition, the excessive clearance between them causes the piston to oscillate within the cylinder under the pressure of high-pressure gases during the engine's power stroke, resulting in knocking against the cylinder wall and producing noise. Piston Pin Slap The main cause of piston pin knocking noise is the excessive clearance between the piston pin and the connecting rod bushing (or the connecting rod bearing itself) or the piston pin bore. During engine operation, the piston pin moves up and down, striking the connecting rod bushing (bearing) or the piston pin bore, generating knocking noises.
19
0
Share

What are the reasons for a car's lack of power and inability to accelerate?

The reasons for a car's lack of power and inability to accelerate may be due to carbon deposits or poor fuel quality. Carbon deposits: There are three reasons for a car's lack of acceleration power. First, carbon deposits may accumulate on the valves, idle speed motor, intake tract, combustion chamber, and spark plugs, causing the car to stall when idling. Poor fuel quality: This can lead to a lack of acceleration power, affecting the gasoline filter and fuel lines, which may result in poor fuel supply and consequently weak acceleration. It can also impact the lifespan of the exhaust system's three-way catalytic converter. If the three-way catalytic converter is clogged, it will directly affect the vehicle's acceleration performance and also lead to increased fuel consumption, resulting in a lack of acceleration power.
13
0
Share

Do Cars Have Auxiliary Fuel Tanks?

Generally, cars do not come with auxiliary fuel tanks, but they can be installed if there is a special need. Here are the specific details about automotive fuel tanks: 1. Introduction: The automotive fuel tank is the full name for a car's fuel tank. Currently, with the development of the automotive industry and the revitalization of the domestic automotive sector, the demand for automotive fuel tanks from major automobile manufacturers has shown a significant upward trend. 2. Classification: Automotive fuel tanks are categorized by material into iron tanks and aluminum alloy tanks. With the development and application of various new materials, the rust prevention issue of iron fuel tanks has become the biggest challenge in tank quality, especially in today's environmentally conscious world. Aluminum alloy fuel tanks not only meet strength requirements but also have significant advantages in corrosion resistance compared to iron and other new materials. They have become the preferred choice for large buses and heavy trucks, which consume large amounts of fuel and require high fuel quality. Automotive fuel tanks are also classified by function into standard tanks and heated tanks.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.