How much windshield washer fluid should be added to the MG ZS at one time?

1 Answers
TannerMarie
07/29/25 10:47am
It can be filled up with 3L at one time. The specific steps are as follows: Open the car hood, locate a blue cap, and open it to access the windshield washer fluid inlet, then add the fluid. Below is an introduction to windshield washer fluid: 1. Summer-specific formula, which includes insect remover additives on top of the original composition, enabling quicker removal of insect residues on the windshield. It also effectively cleans insect marks on the front of the car. 2. The second type is antifreeze windshield washer fluid designed for winter use, ensuring that it won't freeze or damage car equipment even when the outside temperature drops below -20℃. 3. Special antifreeze formula, which remains unfrozen at temperatures as low as -40℃, making it suitable for use in the extremely cold regions of northern China.
Was this review help?
13
4
Share
More Forum Discussions

What does Ah mean for a car battery?

Ah in a car battery represents its capacity, where 'A' stands for current (Ampere) and 'h' stands for hours. A car battery is a type of battery, also known as a storage battery, which works by converting chemical energy into electrical energy. Typically, when car owners refer to a battery, they mean a lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. It is crucial to avoid storing the battery in a discharged state. When the battery is discharged, sulfation can easily occur, where lead sulfate crystals form on the electrode plates, blocking the ion channels and leading to insufficient charging and reduced battery capacity. The longer the battery remains discharged and unused, the more severe the damage. To extend the battery's lifespan, it should be charged once a month when not in use.
9
2
Share

How to Get into the Rear Seats of a Camaro?

To access the rear seats of a Camaro, first adjust the front seats to their furthest forward position. There is a lever on the side of the seat to also adjust the seatback to its most forward position, allowing direct entry to the rear seats. The Camaro is based on the new-generation Chevrolet Camaro, featuring a two-door, four-seat design with dimensions of 4840mm in length, 1920mm in width, and 1380mm in height, and a wheelbase of 2852mm. It offers both hardtop and soft-top convertible body styles. The Camaro comes with three engine options, including an entry-level 3.6L naturally aspirated gasoline engine with a maximum power output of 254kW and peak torque of 385Nm, paired with a 6-speed automatic transmission, achieving a 0-100km/h acceleration time of 5.7 seconds.
2
2
Share

Should the Handbrake Be Engaged for Hill Starts?

Hill starts require engaging the handbrake, especially when on an incline, to prevent the vehicle from rolling backward. The idle speed of a car on an uphill slope is typically not high, and relying solely on the foot brake can pose safety risks. For automatic transmission models during hill-start training, it's essential to control the vehicle speed properly. When starting, release the handbrake, use the right foot to press the brake pedal before moving off, and shift the gear to position 1 or 2. Most modern cars are equipped with hydraulic automatic accelerators, primarily composed of a hydraulic-controlled gear shifting system. The engine's power is transmitted through the transmission, which is a critical factor affecting the vehicle's fuel consumption. The automatic transmission shifts gears automatically based on the degree of throttle pedal depression and changes in vehicle speed, allowing the driver to simply adjust the accelerator pedal to control the speed.
14
0
Share

What Causes the Clicking Sound When Driving on Rough Roads?

Car driving on rough roads with a clicking sound is due to loose chassis suspension components. It is necessary to check the tie rod ball joint, lower arm ball joint, stabilizer bar ball joint, rubber bushings, shock absorbers, pressure bearings, and the steering gear. The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a car. It supports and installs the car engine and its various components and assemblies, forming the overall shape of the car, bearing the engine power, and ensuring normal driving. The transmission system is mainly composed of the clutch, gearbox, universal joint, drive shaft, and drive axle. The running gear consists of the frame, axle, suspension, and wheels. The steering system includes the steering wheel, steering gear, steering knuckle, steering knuckle arm, tie rod, and drag link. The braking system refers to the braking performance of a motor vehicle, which is the efficiency of forcing the vehicle to stop in a short time.
13
3
Share

How many cylinders does the Volkswagen Polo engine have?

Volkswagen Polo's engine has four cylinders. The Volkswagen Polo is equipped with a 1.5L gasoline engine, delivering a maximum power of 83kw, and complies with the China VI emission standards. The transmission options include a 6-speed manual or a 6-speed automatic transmission. In terms of configuration, the two higher-end versions of the Volkswagen Polo feature a 6.5-inch screen, supporting CarLife, CarPlay, and MirrorLink smartphone integration. The Volkswagen Polo is a model launched by Shanghai Volkswagen, with body dimensions of 4053mm in length, 1740mm in width, and 1449mm in height, and a wheelbase of 2564mm. The Volkswagen Polo adopts the brand's signature U-shaped front grille design, with dynamic and clean lines highlighting the geometrically trapezoidal headlight clusters, which incorporate differential lighting elements to fully express Volkswagen's unique charm. The car features personalized high-penetration fog lights on both sides, emphasizing its bold character. The dual-round crystal diamond headlights at the front are embedded with the Volkswagen logo at their inner ends, showcasing the international stature of the model.
15
1
Share

Where is the most suitable location to install ETC?

The ETC installation position for small cars is generally in the upper middle part of the front windshield, while for large vehicles like trucks and buses, it should be installed in the lower middle section. The appropriate installation height should be no less than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect microwave communication signal transmission, ETC should be installed in the microwave sunroof strip area. ETC stands for Electronic-Toll-Collection system. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If applying by a proxy, the agent's valid ID card is also required. The photocopy of the registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card under the owner's name (aged 18-60) is needed for deducting highway tolls. Here are important considerations for ETC installation: 1. Avoid obstructing the driver's view - The best position is behind the rearview mirror: Many car models have steeply angled windshields that already reduce visibility. Installing ETC without considering this may increase blind spots. The right side behind the interior rearview mirror is ideal as it minimizes view obstruction. 2. Ensure proper charging: ETC devices require power but generally don't need manual charging or battery replacement as they feature built-in solar panels. Avoid installing on windshield's blackout areas or positions that might block sunlight to the solar panel. 3. Never remove the device after installation: The adhesive contains an anti-tamper mechanism. The device will lock if removed (triggered by a spring-loaded switch) and requires professional reactivation at ETC service centers. This prevents multiple vehicles sharing one device. ETC usage notes: The effective transaction range is 8 meters. Maintain at least 10 meters distance from preceding vehicles to avoid accidental toll payments for others. ETC lanes have a maximum recognition speed of 20 km/h - excessive speed causes read failures. Insufficient balance in debit card-linked ETC accounts will also lead to payment failures.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.