How much windshield washer fluid should be added to a Camry at one time?
2 Answers
The Camry requires 3-4L of windshield washer fluid per refill. The washer fluid reservoir in the Camry is located on the left side of the engine compartment, with a cap marked with a washer symbol. You can top it up according to the remaining fluid level. Windshield washer fluid is a consumable item with no fixed replacement interval, depending on the driver's usage frequency. The steps to replace the Camry's windshield washer fluid are as follows: 1. Activate the windshield washer switch, and the fluid will spray from the nozzles below the windshield. 2. When the nozzles stop spraying, open the washer fluid reservoir cap and add a small amount of new washer fluid. 3. Activate the washer switch again to flush out any remaining old fluid. 4. Once the nozzles stop spraying, add approximately 4L of washer fluid, then securely close the cap to complete the refill process.
Adding washer fluid to the Camry isn't that particular. The reservoir is under the hood where the blue-capped opening is, with a capacity of about two to three liters. I usually just buy a two-liter bottle and pour it in, stopping when the fluid level reaches the max line. Don't overfill to avoid leaks and dirtying the car. Using antifreeze type is better in winter; avoid tap water as it can freeze and clog the nozzles. I typically wait until the spray from the wipers weakens before topping up, which lasts me one to two months without issue.
