···
Log in / Register

How much windshield washer fluid does the Trumpchi GS4 require?

4 Answers
Ezekiel
07/29/25 1:40pm

Trumpchi GS4 windshield washer fluid requires 3.3L for optimal performance, with no strict brand requirements. The washer fluid filler port for the Trumpchi GS4 is located at the left edge of the engine compartment. Windshield washer fluid is the common term for automotive windshield cleaning solution. It's a consumable automotive product primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The refill procedure is as follows: 1. After opening the hood, locate the washer fluid reservoir. 2. Open the reservoir cap to add fluid. Note there's a dipstick inside - add fluid gradually while monitoring the level until reaching the marked line. Overfilling may cause spillage and unnecessary waste.

Was this review help?
17
0
Share
VanRichard
08/14/25 4:42am

I remember I'm someone who often maintains my Trumpchi GS4 myself. The windshield washer fluid reservoir is under the hood, with a capacity of about 1.8 to 2 liters, depending on the year and configuration. I usually buy regular washer fluid, and a 1.5-liter bottle is basically enough to fill it up. No need for precise measurement—just open the cap and pour it in until the fluid level reaches the MAX line. If switching to antifreeze type in winter, just fill it up the same way. The key is to check it regularly, especially after rain or long-distance driving when it's easy to run out. Not adding fluid in time will cause the windshield to become blurry, affecting safe driving visibility. I think topping it up once a month is sufficient, combining it with refueling when gas prices are high to save money and effort, while also avoiding tank dryness that could corrode components.

Was this review help?
10
0
Share
Expand All
MacJourney
10/10/25 4:36am

Last time was my first time adding windshield washer fluid to the Trumpchi GS4, and I had no idea how much to add, so I asked a friend at the auto repair shop. He said the capacity is usually within 2 liters, so just buy a large bottle and pour it in until the reservoir reaches the marked line—don’t add too little, or the cleaning effect will be poor. Windshield washer fluid actually comes in regular and antifreeze types; remember to switch to the antifreeze type in winter, or it may freeze in cold weather. The filling location is under the blue cap on the right side of the engine bay, which is quite easy to find. Beginners don’t need to worry about overfilling, as the reservoir has built-in overflow protection. It’s recommended to check the fluid level every two weeks, especially if driving on dusty urban roads, to avoid dangerous accidents due to poor visibility during rainy days.

Was this review help?
9
5
Share
Expand All
LaAliyah
11/23/25 5:46am

The washer fluid capacity of the Trumpchi GS4 is approximately 2 liters. Regardless of the exact number, just fill it up to the MAX mark each time. You can see the blue reservoir after opening the hood, then pour in bottled cleaning fluid. Regular type is sufficient for daily use, but switch to antifreeze type in winter to prevent cracking. Check the fluid level periodically - too little will affect the spray system, and it's best to confirm before highway driving.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to solve the problem of BMW X1 air conditioner not cooling?

First, drive with the windows open for a while to equalize the indoor and outdoor temperatures, then close the windows, turn on the air conditioner's internal circulation mode, and set it to the coldest mode with the highest fan speed. If the car air conditioner can still cool, go to a 4S shop to check if there is a lack of refrigerant (Freon). If it is lacking, Freon can be added. It is best to replace the air filter during seasonal changes and perform a cleaning of the air conditioning ducts. For air conditioning circuit issues, check whether the AC switch on the control panel is malfunctioning, whether the main unit's temperature control circuit is normal, and whether the compressor's electromagnetic coil is engaging properly.
16
5
Share

How to Match the Remote Key for Besturn B70?

Park the car and ensure all four doors are closed. Then, open and close the left front door (the main driver's side door) three times. Within three seconds, insert the key and turn it on and off five times consecutively (without starting the engine). Remove the key and press the unlock and lock buttons on the remote. You should hear a response from the remote. After the remote responds, press the unlock and lock buttons on the new remote. The car may experience remote control confusion at this point, requiring a re-matching process. Ensure all four doors are locked, insert the key, and turn it on and off five times within five seconds. Remove the key and press the unlock and lock buttons on the remote twice to complete the process.
18
2
Share

How to Reset the Maintenance Wrench Light on Buick Encore?

Turn off the ignition switch to cut off the power supply to the car. Press and hold the buttons on the dashboard simultaneously, keeping both trip reset buttons pressed for more than 5 seconds. Turn the key to the second position (accessory mode) without starting the engine, and wait until all dashboard lights illuminate. This process typically takes about 10 seconds. Wait for the wrench light to go off. Once it's off, release both trip reset buttons. Turn off the ignition switch and then turn it back on to complete the maintenance reset.
17
1
Share

How to Fix Abnormal Power Window Operation in Honda Vezel?

Open the door where the switch needs to be replaced. For most models, the power window switch area is made of plastic. Carefully examine the seam between the trim panel and door panel to locate the notch. Insert a pry tool or flat tool into the notch to lift the trim panel, then slowly remove the panel along the gap. Disconnect the power window switch connector. Flip the trim panel over, and you should see the switch secured by several cross-head screws. Remove these screws to detach the power window switch. Install the new power window switch, tighten the screws, and reconnect the connector. Test the window operation first to confirm the switch functions properly before reinstalling the trim panel.
8
2
Share

How to remove the fuel pump of Honda CRV?

Remove the rear seat of the Honda Fit vehicle, and use a flat-head screwdriver to pry open the cover plate of the Honda CRV fuel pump. Take off the cover plate of the Honda CRV fuel pump and unplug the connector of the Honda CRV fuel pump. Disconnect the fuel inlet pipe of the Honda Fit, then remove the entire fuel pump of the Honda CRV. Be extremely careful to avoid any open flames or sparks during the process. During installation, note that there are two very small oil drain holes on both sides of the fuel pump base, and no oil should drip from them. Since the fuel pump is immersed in gasoline for a long time, the sealing ring is prone to aging. When installing the fuel pump, check whether the sealing rings on the inlet and outlet pipes are aged or worn.
2
1
Share

How to Replace the Wiper Switch Assembly on a Buick Excelle?

During disassembly, first push the wiper towards the base of the wiper arm. Once it is completely detached from the wiper arm interface, pull it out in the opposite direction. Before pulling it out, rotate the movable wiper blade slightly; otherwise, it may encounter resistance during removal. Installation follows the reverse order of disassembly. First, insert the wiper interface into the wiper arm. During this step, the wiper arm clip must pass through the wiper frame. Then, pull the U-shaped connector upwards into the U-shaped clip. If you hear a crisp "click" sound, it indicates that the installation is properly seated. After installing the new motor, it is advisable to first plug in the power connector to test whether it operates normally.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.