How much urea is consumed per 100 liters of diesel?

What does disc mean on a car?

Disc on a car refers to the disc. DISC RAND means random playback within the disc, DISC SCAN means sequential playback within the disc, DISC REPT means repeat playback within the disc, RAND means all random playback, and PRT is the single repeat playback button. Press the RPT button to repeat the current track, and press it again to cancel the RPT function. After inserting a disc, it will display numbers like TRACXX, indicating the track number. If there is no disc, it will show NO DISK. The reasons for displaying DISC may be: 1. The storage card capacity is too large; 2. The song format is incorrect; 3. There is a problem with the USB interface; 4. The USB drive is faulty.

10

4

Share

What level does the Mercedes-Benz CLS300 belong to?

The Mercedes-Benz CLS300 belongs to the mid-to-large size car category. Taking the Mercedes-Benz CLS-Class 2021 CLS300 Dynamic model as an example: it is a 4-door, 5-seater sedan equipped with a 9-speed automatic transmission. Below is more detailed information about the Mercedes-Benz CLS-Class 2021 CLS300 Dynamic model: 1. Dimensions: The length, width, and height are 4988mm, 1890mm, and 1424mm respectively, with a wheelbase of 2939mm. 2. Powertrain: The Mercedes-Benz CLS-Class 2021 CLS300 Dynamic model's engine has a maximum torque of 370 Nm, a maximum horsepower of 258, and a top speed of 250 km/h. 3. Suspension: The front suspension type is a four-link independent suspension, and the rear suspension type is a multi-link independent suspension.

4

3

Share

What Causes the Airbag Light to Illuminate in a Car?

The reasons for the airbag light illuminating in a car include: 1. Engine self-check: The indicator light will turn on when starting the car, but it will go off after the self-check is completed, typically within about 5 seconds. This is a normal phenomenon. If it remains on, it indicates a fault. 2. False fault: If the battery is severely depleted, the airbag system may send a signal indicating low voltage for a specific airbag, generating a fault code. In this case, simply clearing the code will resolve the issue. 3. Actual fault: There are numerous potential causes for this, such as an airbag malfunction, clock spring failure, crash sensor fault, loose airbag connector, or circuit breakage. It is necessary to promptly use a diagnostic tool to read the fault code, locate the fault point based on the code, and address the issue accordingly.

5

1

Share

What is the standard pressure for automotive air conditioning refrigerant?

Automotive air conditioning refrigerant pressure standards are as follows: 1. When the compressor is running at 1500~2000 rpm: High pressure (discharge pressure) should be around 1.5~2.0 MPa, and low pressure (suction pressure) should be around 0.15~0.35 MPa under normal conditions. The exact values may vary depending on different vehicle air conditioning system configurations and ambient temperature conditions. 2. At idle speed: If the ambient temperature is high (such as under direct sunlight in summer), the high pressure may be slightly higher, reaching up to approximately 2.5~2.8 MPa, but generally should not exceed 3.1 MPa.

1

Share

Which Button to Press for Interior Lights to Automatically Turn On When Opening the Car Door?

When opening the car door, the interior lights will automatically turn on by pressing the second button. Detailed instructions are as follows: 1. The first button: The first button is the one closest to the door, marked with a light symbol, which controls all interior lighting. 2. The second button: The second button is adjacent to the first one, featuring a car door symbol, serving as a function key. When in the off state (yellow), the interior lights will not turn on when opening the door. When in the on state (blue), the interior lights will automatically illuminate upon opening the door. 3. The third button: The third button is located at the rear and can only control a single light, not all the lights.

1

5

Share

What are the requirements and penalty items for gear shifting in Subject 3 driving test?

The requirements and penalty items related to gear shifting in Subject 3 driving test are introduced as follows: I. Requirements for gear shifting: Accurate and smooth gear shifting, with appropriate speed matching the corresponding gear. II. Penalty items related to gear shifting include: 1. Starting or driving in the wrong gear without timely correction, deduct 10 points. 2. Prolonged mismatch between gear and speed, causing excessively high or low engine speed, deduct 100 points. 3. Looking down at the gear or failing to engage the gear twice in a row while driving, deduct 100 points. 4. Gear collision during gear shifting, deduct 10 points. 5. Failing to smoothly shift gears as instructed, deduct 100 points. 6. Mismatch between vehicle speed and gear, deduct 10 points.

11

5

Share

How much urea is consumed per 100 liters of diesel?

What does disc mean on a car?

What level does the Mercedes-Benz CLS300 belong to?

What Causes the Airbag Light to Illuminate in a Car?

What is the standard pressure for automotive air conditioning refrigerant?

Which Button to Press for Interior Lights to Automatically Turn On When Opening the Car Door?

What are the requirements and penalty items for gear shifting in Subject 3 driving test?

How to reset the tire pressure on the Roewe i6?

What is the function of a timing belt?

What are the precautions for driving in winter?

What Causes Water Dripping from a Car?