How Much Turbocharging is Equivalent to a 2.5 Naturally Aspirated Engine?

Why Can't the Car Key Turn or Start the Engine?

If the car won't start and the key won't turn, it could be due to fuel or electrical system issues. First, check if the fuel level is insufficient. Without gasoline as the power source, the car naturally won't start. If the issue is caused by running out of fuel, you can request fuel assistance or have the car towed to a gas station. If the fuel level is sufficient, check for problems such as a blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs. Below are more reasons why a car might not start: 1. Incorrect Gear Position: An incorrect gear position can also prevent the car from starting. Generally, the correct gear positions for starting an automatic transmission car are 'P' or 'N'. If the driver accidentally leaves the gear in 'R' or another position, not only will the car fail to start, but it could also pose a safety hazard. 2. Steering Wheel Lock: For vehicle security, if the steering wheel is turned left or right when the car is turned off, or if the wheels are not straight when parked, the steering wheel's self-locking feature may activate. Even if you insert the key and try to turn it forcefully, it won't budge. This is the vehicle's anti-theft system detecting a potential theft risk, hence locking the steering wheel to prevent theft. 3. Steering Wheel Unlock: Insert the key, press the brake, and then turn the steering wheel left and right. Although the steering wheel is locked, it can still be turned slightly. While turning the steering wheel, turn the key to complete the steering wheel unlocking process.

11

3

Share

What does engine piston stroke mean?

Engine piston stroke refers to the distance the piston travels between the two dead centers (i.e., top dead center and bottom dead center), also known as the stroke, which is one of the important parameters of an engine. Piston stroke size: The piston stroke is equal to the rotational diameter length of the crankshaft connecting rod section. It is generally represented by 's', and for one piston stroke, the crankshaft rotates 180 degrees. The piston stroke not only increases the overall height of the engine but also is not conducive to increasing the engine's speed. Piston stroke process: For a compressor, one cycle is completed every two piston strokes. Each cycle includes four processes: expansion, intake, compression, and exhaust, requiring the crankshaft to rotate two turns, i.e., 720 degrees.

17

1

Share

Is It Necessary to Do Soundproofing for Car Doors?

This depends on the specific situation. Soundproofing the four doors is relatively effective in shielding mid-frequency noise. However, it's important to note that reducing mid-frequency noise does not significantly lower the overall noise level, as high-frequency and low-frequency noises still remain. It may just change the perceived direction of the noise source, improving comfort to some extent. Relevant information is as follows: 1. Soundproofing and comfort performance: For older cars with significant noise, soundproofing the four doors noticeably improves noise reduction and comfort. 2. Noise: For newer cars with less severe noise, soundproofing the four doors shows no obvious difference, as other noises such as engine noise, tire noise, and chassis noise still persist.

1

5

Share

What is the 0-100 km/h acceleration time for the Atenza?

According to official data, the Atenza comes with two engine displacements: 2.5T and 2.0T. The 2.5T model achieves a 0-100 km/h acceleration time of 8.6 seconds, while the 2.0T model takes 9.3 seconds. Factors influencing a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the force available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For comparison, the Superb in the same segment has a maximum torque of 250 Nm and a 0-100 km/h time of 8.7 seconds. The Atenza 2.5T delivers 252 Nm of torque and accelerates from 0-100 km/h in 8.6 seconds. Transmission efficiency: The transmission acts as the medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Atenza is equipped with a 6-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For example, the Superb has a power-to-weight ratio of 105 Hp/T and a 0-100 km/h time of 8.7 seconds. The Atenza 2.5T boasts a power-to-weight ratio of 124 Hp/T, achieving 0-100 km/h in 8.6 seconds.

8

2

Share

What Does Brake Failure Mean?

Brake system failure essentially means that there are issues with components of the vehicle's braking system, which can prevent the system from functioning properly. The primary functions of a car's braking system are to slow down or even stop a moving vehicle, maintain a stable speed when driving downhill, and keep a parked car stationary. Excessive wear of brake pads: Some brake pads are equipped with sensor wires. When the wear on the brake pads reaches a critical level, the circuit is activated, and the warning light on the dashboard will illuminate. Insufficient brake fluid: A lack of brake fluid can lead to reduced braking power and, in severe cases, a complete loss of braking force. This issue can be resolved by promptly replenishing the brake fluid.

15

0

Share

What Causes the Cruze to Overheat?

The water pump is malfunctioning; there is no water in the engine oil, but the possibility of water leaking into the combustion chamber cannot be ruled out; the water temperature sensor is faulty; the exhaust advance angle is delayed; driving at low gear with high speed or high gear with low speed can also easily cause the water temperature to rise. When the water pump is working normally, it vibrates at its inherent frequency, and a large amount of water overflows from the outlet. Here are some solutions for the Cruze's high water temperature: 1. Method One: When the engine temperature is too high, you can touch the upper and lower water pipes to check their temperatures. If there is a significant temperature difference between the two pipes, it can be determined that the thermostat is not working. If you cannot purchase a replacement part immediately, you can remove the thermostat as an emergency measure and replace it as soon as you get home. 2. Method Two: If there is air in the cooling system, it can create an airlock, disrupting the circulation of the coolant and causing the engine temperature to rise. To release the air, follow these steps: run the engine at high speed, gently unscrew the radiator cap until gas starts to escape. Some coolant will flow out with the gas. Repeat this process several times until you feel all the gas has been released. After troubleshooting, replenish the coolant promptly. 3. Method Three: If the vehicle has been driven on dirt roads or muddy sections for a long time, debris may accumulate on the radiator, affecting its cooling efficiency and leading to high water temperature. In this case, you can first use compressed air to blow through the radiator fins.

5

Share

How Much Turbocharging is Equivalent to a 2.5 Naturally Aspirated Engine?

Why Can't the Car Key Turn or Start the Engine?

What does engine piston stroke mean?

Is It Necessary to Do Soundproofing for Car Doors?

What is the 0-100 km/h acceleration time for the Atenza?

What Does Brake Failure Mean?

What Causes the Cruze to Overheat?

What does srsairbag mean?

Why Was the Jingyi X3 Discontinued?

Which country is the Alfa Romeo brand from?

Is it a traffic violation to proceed through a continuously flashing yellow warning signal light?