How Much Transmission Fluid Should Be Added?

1 Answers
SanParker
07/25/25 10:26am
The amount of transmission fluid required depends on the vehicle model and the replacement method. Generally, manual fluid replacement requires 4-6 liters of fluid, while using a fluid exchange machine requires approximately 9-12 liters. Transmission fluid is categorized into automatic transmission fluid (ATF) and manual transmission fluid. ATF should be replaced every two years or after driving 60,000-80,000 kilometers, while manual transmission fluid should be replaced every three years or after driving 80,000-100,000 kilometers. More details about transmission fluid are as follows: 1. When replacing transmission fluid, the old fluid must be drained. This can be done by loosening the drain plug screw at the bottom of the transmission pan, allowing the old fluid to drain out by gravity. Due to the internal structure of the transmission, this method can only remove about 70% of the old fluid, resulting in a lower replacement rate. 2. Automatic transmissions have higher requirements for transmission fluid. It is recommended to use a fluid exchange machine for replacement, as it offers a higher replacement rate and can essentially remove all the old fluid.
Was this review help?
2
2
Share
More Forum Discussions

What are the reasons for a sudden inability to accelerate while driving on the highway?

The reasons for a sudden inability to accelerate while driving on the highway include blockage in the fuel system, ignition system failure, and a dirty throttle position sensor. Solutions for blockage in the fuel system: 1. Directly add a fuel system cleaner to the fuel tank. This is the simplest method, but the effect is not long-lasting, and the cleaning is not thorough. It is suitable for vehicles with low mileage. 2. Use a "drip cleaning" method. This can clean both the fuel system and the carbon deposits on the valves, and it is the method generally recommended by auto repair shops. 3. Use a no-disassembly cleaning machine. By connecting the engine's fuel inlet and return pipes to the cleaning machine's corresponding pipes with special adapters, a closed loop is formed. This method is convenient and quick, but it only cleans the fuel injectors and not the carbon deposits on the valves. However, for cleaning the fuel system alone, it is very effective and a good method. The fuel filter should be replaced every two maintenance cycles. Solutions for ignition system failure: Connect an ignition tester and adjust the ignition timing to the specified value.
11
4
Share

What is the fuel tank capacity of the Baojun RC6?

The fuel tank capacity of the Baojun RC6 is 50 liters. In the same class, the Yixuan MAX 2021 1.5T Super Dad Edition has a fuel tank capacity of 52 liters, and the Besturn B70 2022 2.0T also has a fuel tank capacity of 52 liters. Maintenance tips for the fuel tank are as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leaks at the fuel pipe connections and switches. For fuel tank caps equipped with air valves and vapor valves, also check that the ventilation holes are clear. The filter screen at the fuel filler inlet should be kept intact to prevent impurities from entering the tank during refueling, which could clog the fuel lines. The sealing gasket on the fuel filler cap should also be in good condition to prevent fuel from spilling out while driving. If the owner wants to check the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates that the fuel is running low, and when it is near F, it means the fuel level is sufficient.
19
0
Share

What aspects should be paid attention to when using the car air conditioning system?

When using the car air conditioning system, the following points should be noted: 1. When the air conditioning has been in a non-use state for a long time, check the belt tension before the initial startup; 2. After prolonged use of the air conditioning system, perform a dust removal and sterilization treatment on the system; 3. Do not turn off the fan immediately when turning off the air conditioning. After turning off the AC switch, let the fan run for an additional one or two minutes to blow away the condensed water on the evaporator, preventing the evaporator from becoming moldy and avoiding the generation of odors. Poor air conditioning performance is the most common issue, and possible causes include: 1. Poor heat dissipation due to external dirt clogging the radiator, which can be resolved by cleaning the condenser; 2. The electric fan not working, requiring inspection of the relevant wiring and fan motor; 3. Issues with system pressure, as both excessively high or low system pressure can lead to poor air conditioning performance.
18
5
Share

What are the differences between Lexus ES and LS?

Lexus ES and LS are not in the same vehicle class. The ES is a mid-size luxury sedan, while the LS is a full-size luxury sedan. Additionally, the powertrains used in the ES and LS are different. The LS is equipped with a 3.5-liter naturally aspirated V6 engine, whereas the ES lineup exclusively uses four-cylinder naturally aspirated engines. The ES is available with two engine options: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. Below are the specific differences: Engine: The 2.0-liter naturally aspirated engine delivers 173 horsepower and 208 Nm of maximum torque. This engine reaches its peak power at 6,600 rpm and achieves maximum torque between 4,400 and 5,200 rpm. It features VVT-ie technology, hybrid injection system, and an aluminum alloy cylinder head and block. This engine is paired with a CVT transmission. The 2.5-liter naturally aspirated engine produces 207 horsepower and 243 Nm of maximum torque, with peak power at 6,600 rpm and maximum torque between 4,000 and 5,000 rpm. It also incorporates VVT-ie technology, hybrid injection system, and an aluminum alloy cylinder head and block.
4
5
Share

How to Turn Off the Auto Start-Stop Function in Corolla Hybrid?

Auto start-stop is enabled by default. When the car starts, the auto start-stop system is in normal working condition. To turn it off, simply press the auto start-stop button. When encountering traffic lights or stopping for other reasons while driving, step on the brake, and the engine will automatically shut off after two seconds. Releasing the brake and stepping on the accelerator, or lightly turning the steering wheel will restart the engine. Additional details: 1. The COROLLA HYBRID features a highly distinctive and advanced exterior design. 2. The front fascia incorporates slim LED headlights and 'lightning-shaped' LED position lights, complemented by chrome trim with both glossy and matte finishes, exuding a premium feel. The rear features three-dimensional LED taillights with smoked lenses, achieving a perfect balance between sportiness and elegance. 3. The hybrid-specific instrument panel and gearshift lever highlight the COROLLA HYBRID's advanced and premium qualities. The hybrid-exclusive instrument panel, dedicated center console, and added stitching further enhance the sense of sophistication and advancement. The center console and door trims adopt a black wood grain design, showcasing a high-end texture.
6
2
Share

What is the actual measured ground clearance of the GL8?

In an unloaded state, the ground clearance of the vehicle is 160mm. The minimum ground clearance of the older model is 144mm, while that of the newer model is 147mm. The minimum ground clearance of a vehicle refers to the distance between the lowest point of the vehicle (excluding the wheels) and the ground when the vehicle is either unloaded or fully loaded. Below is an introduction to the Buick GL8: The Buick GL8, as a top-tier MPV, has been exported in large quantities due to its luxurious appearance, powerful performance, and spacious comfort, earning it the title of the perfect MPV by Southeast Asian media. The height of the chassis directly affects the vehicle's off-road capability. Chassis height: For family sedans, the chassis height should be no less than 110mm and no more than 150mm. Based on this parameter, if the chassis height exceeds 13cm, the sedan can more easily navigate various complex road surfaces, but its high-speed stability is poorer. If the chassis height is below 110mm, the vehicle's stability at high speeds is better, but the downside is that its off-road capability is reduced. Some vehicles now come equipped with air suspension, which can automatically adjust the chassis height at any time to better meet the needs of different road surfaces.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.