···
Log in / Register

How much tire pressure should a car have in summer?

4 Answers
PeytonMarie
07/29/25 10:20am

According to the season, the general tire pressure in summer is 2.3kg for the front tires and 2.5kg for the rear tires; in winter, it's 2.5kg for the front tires and 2.7kg for the rear tires. The exact values may vary slightly depending on the vehicle model and style. It is necessary to refer to the standard tire pressure chart on the car. The standard tire pressure chart can usually be found in the following places: the vehicle user manual, the label near the driver's door (near the B-pillar), the drawer next to the driver's seat, or the fuel tank cap door. Excessive tire pressure: If the tire pressure is too high and significantly exceeds the standard pressure, the tire's friction and adhesion will decrease, affecting braking performance, causing steering wheel vibration and deviation, and reducing driving comfort. At the same time, it accelerates the wear of the central tread pattern, shortens the tire's lifespan, increases body vibration, and indirectly affects the lifespan of other components. Insufficient tire pressure: If the tire pressure is too low and significantly below the standard pressure, it increases the friction coefficient between the tire and the road surface, leading to higher fuel consumption. It also makes the steering wheel heavy and prone to deviation, among other factors that are detrimental to driving safety. Insufficient tire pressure increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling.

Was this review help?
15
3
Share
DeCora
08/13/25 1:58pm

As a seasoned driver with over a decade of experience, I recommend maintaining the manufacturer's suggested tire pressure in summer, usually around 2.2 to 2.5 bar as indicated on the door frame—don't adjust it arbitrarily. High temperatures will naturally increase tire pressure slightly, but don't deliberately underinflate because of the heat. Doing so risks blowouts at high speeds and reduces fuel efficiency. I make it a habit to check tire pressure monthly with a gauge, measuring when the tires are cold for accuracy, while also inspecting tread wear. Safety comes first—unstable pressure accelerates tire aging, leading to costly replacements. Remember this small detail for safer and more economical driving.

Was this review help?
9
0
Share
Expand All
StBenjamin
10/07/25 4:25am

Tire pressure management is particularly crucial in summer, as high temperatures can cause tire pressure to rise, but it should not exceed the upper limit of 35 psi. Refer to the vehicle's manual for specific values. Excessive pressure reduces grip and increases the risk of skidding, while too low pressure increases rolling resistance and fuel consumption. I always make sure to measure regularly, especially before long trips, ensuring measurements are taken when the tires are cold. This helps prevent the risk of blowouts and extends tire life. Simple maintenance like this enhances overall driving safety—don’t underestimate this routine task.

Was this review help?
11
2
Share
Expand All
DeLeilani
11/20/25 5:48am

Summer is here. I usually check the recommended tire pressure directly through my phone app. For most car models, maintaining 2.3 bar when the tires are cold is sufficient. Don’t think you need to adjust it lower or higher just because the weather is hot. Too high pressure can damage the tires or even cause a blowout, while too low pressure increases fuel consumption. I recommend buying a small tire pressure gauge for easy and practical checks. Proper tire pressure reduces wear, ensures smooth driving, and saves money while being eco-friendly.

Was this review help?
10
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Seres SF5?

Seres SF5 has an average fuel consumption of 7.5 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: Lightly press the accelerator: When the car starts at low speed, it is the peak area of fuel consumption. Therefore, gently pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. Regular maintenance: Change the engine oil and remove carbon deposits. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to glide.
11
4
Share

Can I still drive if the car shows an oil change reminder?

You should not drive if the car shows an oil change reminder. Below is additional information about oil changes: Effects: Engine oil serves functions such as lubrication, cooling, cleaning, sealing, and rust prevention. When the oil change reminder appears, it indicates that these functions have diminished after a certain period of usage. If lubrication and cooling functions decline and the oil is not changed promptly, continued use can damage the engine. This reduces its lifespan, increases the likelihood of issues, and raises repair costs. Precautions: The oil viscosity must be appropriate. Different grades of engine oil have distinct characteristics, affecting cold-start performance and high-temperature wear resistance and adhesion. Oil viscosity is inversely related to temperature. When the engine is cold, the oil viscosity is higher. If the oil is too thick, it can impose additional strain on components like the starter motor and battery.
4
0
Share

When will Ningbo implement the National 6 policy?

Ningbo officially implemented the National 6 standard on July 1, 2019. The following is extended information about National 6: Introduction: The National Sixth Stage Motor Vehicle Pollutant Emission Standards refer to the standards formulated to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China", prevent pollution of the environment by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. It includes two parts: "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (China Sixth Stage)" and "Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China Sixth Stage)". Implementation Scope: Currently, China has implemented the National 6a policy nationwide.
11
0
Share

Should the Audi A6 use 95 or 92 octane gasoline?

Audi A6 requires gasoline with an octane rating of 95 or higher. Gasoline is produced by refining different petroleum components such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline, which are then blended with high-octane components. The following are the differences between 95 and 92 octane gasoline: Different octane ratios: 92 octane gasoline consists of 92% isooctane and 8% n-heptane; 95 octane gasoline consists of 95% isooctane and 5% n-heptane. Different compression ratio applications: 92 octane gasoline is suitable for engines with a compression ratio between 8.6 and 9.9; 95 octane gasoline is suitable for engines with a compression ratio between 10.0 and 11.5.
6
5
Share

How to use the automatic parking feature in the GLC260?

To use the automatic parking feature in the GLC260: 1. Keep the vehicle speed below 30 km/h; 2. Press the intelligent parking button located on the panel next to the driver's seat. Taking the GLC260 as an example, it is a mid-size SUV with body dimensions of: length 4764mm, width 1898mm, height 1642mm, wheelbase 2973mm, fuel tank capacity 66L, and trunk capacity 580L. The GLC260 is equipped with a 2.0T turbocharged engine, delivering maximum horsepower of 197PS, maximum torque of 320Nm, maximum power of 145kW, and is paired with a 9-speed automatic transmission.
17
1
Share

Where is the power window control module for the 2005 Jetta?

05 Jetta power window control module is located on the left side of the instrument panel, above the fuse box, behind the headlight switch. Principle of car window glass lifting: The switch controls the forward and reverse rotation of a small internal motor, which drives a cable to move the glass-fixed slider up and down. Methods for operating car window glass: Hold the switch: Release the button when the window lowers to the desired position. Lift the switch: Release the button when the window rises to the desired position. Maintenance methods for window glass lifting: Regular cleaning: Keep the windows clean with regular cleaning. Add sufficient lubricant: When the lubricant in the window regulator is depleted, remove the inner cover and add enough lubricant. Apply maintenance agents: Spray oil on the window gears and apply maintenance agents to the rubber.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.