How much t is equivalent to a 1.6L engine?

1 Answers
Sauron
07/30/25 6:47am
Engine 1.6L is equivalent to 1.2t, which means the power of a 1.6L naturally aspirated engine is comparable to that of a 1.2L turbocharged engine. Of course, there may be some differences depending on the power tuning of different car manufacturers for their models. Since a turbocharged engine compresses air through a turbine before delivering it to the engine's cylinders, making combustion more efficient, a turbocharged engine of the same displacement will have more power than a naturally aspirated engine. An engine is a machine that can convert other forms of energy into mechanical energy, including types such as internal combustion engines, external combustion engines, and electric motors.
Was this review help?
13
0
Share
More Forum Discussions

Isn't the driver's license number the same as the ID card number?

The driver's license number is the same as the ID card number. According to regulations, one ID card can only apply for one driver's license, so the driver's license number is the ID card number, which is a unique number. Age requirements for applying for a driver's license: 1. Small cars: To apply for small cars, small automatic transmission cars, special small automatic transmission passenger cars for the disabled, or light motorcycles, the applicant must be between 18 and 70 years old. 2. Low-speed vehicles: To apply for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. 3. City vehicles: To apply for city buses, large trucks, trolleybuses, or trams, the applicant must be between 20 and 50 years old. 4. Medium-sized buses: To apply for medium-sized buses, the applicant must be between 21 and 50 years old. 5. Tractor vehicles: To apply for tractor vehicles, the applicant must be between 24 and 50 years old. 6. Large buses: To apply for large buses, the applicant must be between 26 and 50 years old.
17
1
Share

What is the Function of Pliers?

Pliers are a type of hand tool used for gripping, securing workpieces, or twisting, bending, and cutting metal wires. Below is an introduction to pliers: 1. Classification and functions of pliers: (1) Diagonal pliers: Sometimes also called side-cutting pliers. They are most effective for cutting wires, especially for trimming excess wire ends after soldering or excessive leads on printed circuit boards after installing components. Diagonal pliers are also commonly used as an alternative to regular scissors for cutting insulating sleeves or nylon cable ties. The most commonly used diagonal pliers are 160mm long with plastic-insulated handles. (2) Pipe wrench: Used for tightening or loosening various pipes, pipe fittings, or round parts. It is a common tool for pipe installation and repair. Its inserts can be forged or cast. 2. Precautions for using pliers: (1) Pliers should be operated with the right hand. Keep the jaws facing inward for better control of the cutting position. Extend the little finger between the handles to stabilize them, allowing the plier head to open and close flexibly. (2) The insulated plastic sleeve of pliers can withstand voltages above 500V, enabling safe cutting of live wires. Avoid careless handling to prevent damage to the insulated plastic sleeve.
10
2
Share

Is Installing a Rear Wing on a Car Considered Legal Modification?

Adding a rear wing to a car is legal. The following vehicle modifications are not considered illegal: 1. Rear wing modification: When modifying the rear wing, the car owner must file a record with the vehicle management office in advance. After the modification is completed, the owner must also take new photos and replace the photo on the vehicle registration certificate. 2. Body color: The body color can be changed, but within 10 days, the owner must go to the vehicle management office to take new photos and apply for a change of registration. Some law enforcement vehicle color schemes are not allowed to be modified. 3. Partial painting: As long as the body color change range is within 30%, there is no need to go to the vehicle management office to change the registration and modify the vehicle registration certificate. In addition, wheels can be modified, but the size must be consistent with the original car, and the color or appearance can be changed freely. Moreover, there is no need to specifically register for the change.
18
3
Share

What does a yellow engine light on the dashboard indicate?

A yellow engine light on the dashboard indicates an engine malfunction. The reasons for the yellow engine light are as follows: 1. Sensors: Sensor malfunction. 2. Engine: Poor engine maintenance. 3. Oil: Substandard fuel or engine oil quality. 4. Malfunctions: Faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines causing poor combustion of the air-fuel mixture in the engine. 5. Habits: Poor driving habits. Solutions for the yellow engine light are as follows: 1. Components: Inspect and repair sensor components. 2. Maintenance: Perform timely engine maintenance. 3. Oil: Use fuel and engine oil of qualified quality. 4. Replacement: Replace spark plugs, ignition coils, fuel pump, or clean the fuel lines. 5. RPM: Maintain reasonable engine speed.
3
1
Share

Can ETC Device Be Installed Without Sticking to the Windshield?

ETC can be used without sticking to the windshield. Installing ETC on the upper part of the windshield is to minimize obstruction of the driver's view and to ensure better recognition by the equipment at highway toll stations. If you don't want to install it on the windshield, try to place it in an open position where it can still be seen through the windshield. For small cars, the ETC installation position is generally in the upper middle part of the front windshield, while for large vehicles like trucks and buses, the installation position is in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave window area. Here are some precautions for ETC installation: Do not obstruct the view; it's best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which reduces the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a built-in solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the anti-tamper lever in. If the tag is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues caused by the ETC device of the vehicle in front, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic sensing and payment for the wrong vehicle. The ETC lane recognizes vehicles at a speed of 20 km/h; driving too fast may result in failure to read the vehicle's device information and failed transactions. If using a debit card linked to ETC, insufficient balance may also lead to transaction failures.
13
2
Share

How long does it take for a novice driver to drive on the highway?

Novice drivers can drive on the highway after obtaining their driver's license for 12 months. During the probationary period, driving on the highway should be accompanied by a driver who has held a driver's license for the corresponding or higher vehicle type for more than three years. For driving small automatic passenger vehicles specially designed for the disabled, the accompanying driver can hold a driver's license for small automatic passenger vehicles or higher. During the probationary period after adding a new vehicle type to the license, driving the originally permitted vehicle type is not subject to the above restrictions. More extended information is as follows: 1. According to Article 64, Paragraph 1 of "Order No. 123": The first 12 months after a motor vehicle driver initially applies for a driver's license or adds a new vehicle type to the license is the probationary period (i.e., within 12 months from the "initial license date" on the original driver's license); if the probationary period is extended, 24 months from the "initial license date" is the probationary period. 2. Article 65, Paragraph 2 of "Order No. 123" stipulates: When driving on the highway during the probationary period, the driver should be accompanied by a driver who has held a driver's license for the corresponding or higher vehicle type for more than three years. The accompanying driver should sit in the front passenger seat to guide the probationary driver. Driving without an accompanying driver or with an unqualified accompanying driver will be subject to fines.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.