How much smaller is the BMW X1 compared to the X3?

How Long After Passing Subject 2 Can You Schedule Subjects 3 and 4?

According to regulations, you can schedule Subject 3 as early as 7 days after completing Subject 2. However, whether you can schedule Subject 3 does not depend on Subject 2, but rather on Subject 1. As per the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," for a C1 driver's license, you must wait at least 30 days after passing Subject 1 to schedule Subject 3, while for a C2 license, the waiting period is only 20 days after passing Subject 1. Below is additional information: 1. Subject 3: Subject 3 is the abbreviation for the Road Driving Skills and Safe Civilized Driving Knowledge Test. The road driving skills test generally includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operations, lane changing, parking by the roadside, driving straight through intersections, turning at intersections, meeting vehicles, overtaking, U-turns, night driving, etc. The test content varies depending on the type of vehicle. 2. Subject 4: Subject 4, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. You can directly schedule Subject 4 after passing Subject 3.

10

2

Share

Can you drive over the highway channelization line?

Normally, you cannot drive over the highway channelization line. If caught by electronic surveillance, the driver will be penalized with a 3-point deduction and a fine. Forms and functions of highway channelization lines: Highway channelization lines mainly consist of one or several white V-shaped lines or diagonal stripe areas set according to the terrain of the intersection. The marking forms primarily include single solid lines, V-shaped lines, and diagonal zebra crossings. The slope of the marking is 2:1, with a width of 600mm, and the spacing between two markings is 1-3m. They are mainly used for intersections that are too wide, irregular, or have complex driving conditions, as well as ramp entrances of interchanges or other special locations. The purpose of setting up highway channelization lines is to ensure that every vehicle can 'stay in its lane,' thereby regulating, guiding, and warning traffic to reduce accidents. Driving rules for highway channelization lines: Highway channelization lines are a type of prohibited marking. Vehicles must follow the prescribed route and are not allowed to drive over or cross the lines. They are also not permitted to make U-turns or park arbitrarily within the channelization line area. Once detected, the driver may be fined and penalized with 3 points. Illegal parking on highway channelization lines is no longer penalized as 'violating prohibited marking instructions' with a fine and 3-point deduction but as 'encroaching on the emergency lane' with a fine and 6-point deduction.

18

4

Share

What is the Engine External Characteristic Curve?

Engine external characteristic curve refers to the curve showing how power or torque changes with engine speed when measured at full load. Here are the details: 1. Engine characteristic curve: If the functional relationship between engine power, torque, fuel consumption rate and crankshaft speed is represented by a curve, this curve is called the engine characteristic curve. 2. Introduction: When the fuel supply mechanism reaches its maximum position, the total power characteristic is obtained, also known as the engine external characteristic. The characteristics obtained when the fuel supply adjustment mechanism is set to other positions are called partial speed characteristics.

8

5

Share

What is the reason for the car always rolling back during reverse parking?

The main reason for the car always rolling back during reverse parking is the lack of coordination between the clutch and brake, leading to insufficient power and premature release of the brake. Here are the specific details: 1. Clutch: The clutch should be pressed quickly and released slowly. Before starting, slowly lift the clutch until it reaches the semi-engaged state, then stop lifting and maintain this state. 2. Brake: When the clutch reaches the semi-engaged state and the car shakes significantly, gently release the brake. Once the car starts moving, completely release the brake. Whether pressing or releasing the brake, it should be done slowly, as sudden braking can easily cause the car to stall.

9

1

Share

Should You Take the Old Tires After a Car Tire Replacement?

It is advisable to take the old tires after a car tire replacement. This can prevent unscrupulous businesses from reselling used tires and also contributes to energy conservation and environmental protection. Below is detailed information about car tires: 1. Overview: Car tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help absorb shocks during driving, ensuring good ride comfort and smooth driving. 2. Functions: They ensure good adhesion between the wheels and the road surface; improve the car's traction, braking, and off-road capabilities; and bear the weight of the vehicle. The important role tires play in a car is increasingly being recognized.

7

0

Share

Where is the right-side reinforcement rib located in a car?

Right-side reinforcement ribs do not have a fixed position and primarily depend on the vehicle's structural design. They may be located on the doors or elsewhere. Reinforcement ribs are generally not found on the body frame, as the passenger compartment section of the body frame is constructed using high-strength materials. Below is relevant information about the car frame: 1. Body Composition: The body is divided into the body frame and body panels. The panels include the front and rear bumpers, hood, doors, front fenders, and trunk lid. 2. Body Frame: After removing the panels, what remains is the body frame. Since the roof and rear fenders are welded to the body frame, they are considered part of the body frame and not the panels.

19

4

Share

How much smaller is the BMW X1 compared to the X3?

How Long After Passing Subject 2 Can You Schedule Subjects 3 and 4?

Can you drive over the highway channelization line?

What is the Engine External Characteristic Curve?

What is the reason for the car always rolling back during reverse parking?

Should You Take the Old Tires After a Car Tire Replacement?

Where is the right-side reinforcement rib located in a car?

Can I choose not to use the ETC installed in my car?

How Many Days Are Required for Subject 1 Clock-in?

What does the simulated study hours for Subject 2 mean?

Where can I check my score for Subject 1?