How Much Rear Axle Oil Should Be Added?

1 Answers
LePaisley
07/29/25 3:43pm
Rear axle oil standard is to add 150 ml is enough. It should be replaced every two months, which can be appropriately extended. In winter, it is best to switch to winter motorcycle engine oil to reduce the car's resistance. The relevant introduction of gear oil is as follows: Introduction to Gear Oil: Gear oil is a lubricating oil mainly composed of petroleum lubricating base oil or synthetic lubricating oil, with the addition of extreme pressure anti-wear agents and oiliness agents. Function of Gear Oil: Gear oil mainly lubricates gears and bearings, prevents wear and rust, and helps dissipate heat from gears. It is used in various gear transmission devices to extend their service life and improve power transmission efficiency. Gear oil should have good anti-wear properties, load-bearing capacity, and appropriate viscosity. In addition, it should also have good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention performance.
Was this review help?
1
2
Share
More Forum Discussions

What are the tips for reversing into the garage in C1 subject 2?

C1 exam tips for reversing into the garage include positioning the vehicle correctly at the start; controlling the speed well; maintaining a 30 cm distance from the garage corner; and gently applying the brakes. C1 driver's license exam passing standards: Traffic regulations and related knowledge (Subject 1) - Written test, full score is 100, passing score is 90 or above. Field driving (Subject 2) - On-site, actual vehicle. Minimum passing score is 80, below 80 is failing. Road driving (Subject 3) - Highway or simulated field, actual vehicle. Full score is 100, must achieve 90 or above to pass. Safe and civilized driving knowledge - Written test, questions mainly in the form of cases, pictures, animations, etc., including true/false, single-choice, and multiple-choice questions, totaling 50 questions. Full score is 100, passing score is 90. C1 permitted vehicle types: C1 driver's license allows driving small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; small passenger vehicles with seating capacity of 9 or fewer. C1 driver's license does not permit driving: large buses, tractors, city buses, medium buses, large trucks, ordinary three-wheel motorcycles, ordinary two-wheel motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, C1 license holders cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
12
0
Share

Can I take the Subject 4 driving test if my ID card has expired?

No. An expired ID card is invalid. When attempting to read information from it at the correct time, the system will display that the ID card has expired and no longer has the legal effect of proving the citizen's identity. Since an expired ID card is legally invalid and no longer has legal effect, it cannot be used to handle related business. According to the requirements of public security authorities, no unit is allowed to use an expired ID card to conduct business, otherwise the legal responsibility will be unfavorable to the operating unit.
20
0
Share

How Long Will a New Car Battery Last Without Use?

New car batteries may lose charge after three months of inactivity. Below is relevant information on car battery maintenance: Methods for car battery maintenance: Regularly clean the car battery, prevent low battery conditions, and conduct periodic inspections to understand the battery's charging status and assess its remaining lifespan. Precautions for battery maintenance: Before turning off the vehicle, ensure all electrical devices are switched off. Avoid long-term parking; restart the vehicle every week to maintain optimal battery voltage.
11
2
Share

Where to Check the Vehicle Manufacturing Date?

Vehicle manufacturing date can be found on the vehicle identification plate. More information about the vehicle identification plate is as follows: 1. The vehicle identification plate is a label indicating the basic characteristics of the vehicle, mainly including the manufacturer, model, engine power, total mass, load capacity or passenger capacity, manufacturing number, manufacturing date, and manufacturer name. 2. The manufacturing time can be determined by consulting the user or checking the vehicle identification plate, which always displays the manufacturing time in the driver's compartment. 3. Every vehicle must be equipped with a vehicle identification plate, placed in an easily observable location at the front of the vehicle. For buses, the plate is placed above the front passenger door inside the vehicle.
13
5
Share

Is it normal for the car's fan to keep running when the air conditioning is on?

It is normal because when the air conditioning is turned on, the air conditioning compressor starts working and requires the fan to dissipate heat. Below is relevant information: 1. Introduction: Automotive air conditioning refers to the air conditioning device installed in a car, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. 2. Structure: It generally includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, has a simple structure, and is easy to operate, making it a popular modern automotive air conditioning system internationally.
7
2
Share

What is the tire model of the Tiggo 3?

Tiggo 3 has two tire models: 215/65R16 and 215/60R17. In 215/65R16, the first number 215 represents the tire width of 215MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 16 represents the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. In 215/60R17, the first number 215 represents the tire width of 215MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 17 represents the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. Tiggo 3 is equipped with Maxxis tires, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn, not the tire; Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data marked: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as: standard rim 5.00F.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.