How Much Over the Speed Limit Is Driving at 89 in an 80 Zone?

1 Answers
SanBrynlee
07/29/25 12:29pm
Driving at 88 km/h in an 80 km/h zone is considered 10% over the speed limit. Below are the relevant regulations for speeding: 1. Within 10% over the speed limit, no penalty is imposed for the time being; 2. Between 10% and 20% over the speed limit, a fine is imposed, and 3 points are deducted; 3. Between 20% and 30% over the speed limit, a fine is imposed, and 6 points are deducted; 4. Between 30% and 50% over the speed limit, a fine is imposed, and 6 points are deducted; 5. Between 50% and 70% over the speed limit, a fine is imposed, 12 points are deducted, and the driver's license may also be revoked; 6. Over 70% above the speed limit, a fine is imposed, 12 points are deducted, and the driver's license may also be revoked.
Was this review help?
20
2
Share
More Forum Discussions

What are the reasons for the large injection pulse width of the Bora Classic?

Bora Classic injection pulse width is too large for the following reasons: Observe with idle speed: If the injection pulse width is too large, it is generally necessary to observe it in conjunction with the idle speed. If the idle speed is high and the pulse width is large, it is usually caused by false signals from the throttle position sensor or coolant temperature sensor. If the idle speed is normal, then the oxygen sensor is likely to be faulty. Caused by inaccurate closed-loop data: Inaccurate closed-loop data received by the ECU can also lead to this issue. Among these data, the oxygen sensor and coolant temperature sensor are the primary factors, though the intake pressure sensor and throttle position sensor should not be ruled out. Use a Bluetooth OBD scanner to identify the source of the problem.
10
0
Share

Is Subject 2 or Subject 3 Harder to Schedule?

Subject 3 is more difficult to schedule. Here is more information about the Subject 3 test: 1. Content of the Subject 3 test: The road driving skills test for Subject 3 generally includes: preparation before getting in the car, simulated lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Notes for the Subject 3 test: Stay calm during the test. When shifting gears and operating lights, do not let nervousness affect your performance, and avoid losing points on the simplest procedures. Practice is key to passing the Subject 3 test. Observe carefully during practice, and be able to handle unexpected situations flexibly, ensuring a flawless performance during the actual test.
17
4
Share

What are the reasons for the no signal issue in Bestune T77's vehicle networking?

The possible reasons for the no signal issue in Bestune T77's vehicle networking could be signal interference around the vehicle or a malfunction in the vehicle networking antenna. Solutions for the no signal issue in vehicle networking: Replace the radio head, install an external antenna or signal amplifier. Installing an external antenna or signal amplifier can be effective for your car, as it is not only relatively simple to install but also cost-effective. Alternatively, installing a signal amplifier can help, as the original factory navigation system usually comes with a built-in signal amplifier. Introduction to vehicle networking: Vehicle networking is an interactive wireless network built based on information such as vehicle location, speed, and route. It ensures the distance between vehicles, reducing the likelihood of collisions. Vehicle networking also helps drivers with real-time navigation and improves traffic efficiency by communicating with other vehicles and network systems.
5
3
Share

Should I Still Go to Sign if I Failed the Third Driving Test?

After completing the road test, regardless of whether the result is pass or fail, the candidate is required to sign to confirm their own score. Below are specific explanations regarding the third driving test: 1. Definition: The third test, also known as the road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe civilized driving knowledge test in the motor vehicle driver's examination. 2. Test Instructions: If the fifth scheduled test is still failed within the validity period of the driving skill test permit, the results of other previously passed subjects will be invalidated. 3. Test Content: The third test generally includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting operation, lane changing, parking by the roadside, going straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, and night driving.
7
2
Share

How to Solve Rust on Car Chassis?

To solve rust on a car chassis, follow these steps: 1. Lift the car; 2. Remove rust from the chassis; 3. Spray chassis armor. The function of a car chassis is to support and install the car engine and its various components, forming the overall shape of the car, receiving the power generated by the engine, and ensuring normal driving when the car moves. Daily maintenance of the car chassis includes: 1. Ensure good lubrication and proper adjustment of wheel hub bearings; 2. Properly adjust the front wheel toe-in and ensure good lubrication and proper adjustment of wheel hub bearings; 3. Pay attention to changes in the front and rear axles and the frame; 4. Monitor the working condition of the clutch; 5. Adjust the brake clearance appropriately; 6. Check for any damage to the leaf springs.
5
5
Share

Why does the new Focus power steering pump leak oil?

New Focus power steering pump leaks oil because the oil pipe is loose and needs to be tightened, the power steering pump fixing screws are loose, and the gasket oil seal is aging. Reasons for loose oil pipe: The exhaust pipe and the engine are connected by a flexible connection. After long-term use of the car, the flexible connection is damaged and aged, causing the problem. The connection between the exhaust pipe and the frame is fixed by several rubber rings. The rubber rings are damaged, and the rubber aging problem occurs. There are seals between the air pipe and the flexible connection, and between the flexible connection and the engine. The seals are damaged. Reasons for aging gasket oil seal: Too long time, high temperature, oil immersion, poor quality of domestic products, etc.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.