How much over the speed limit is driving at 100 in a 70 zone?

2 Answers
MollyAnn
07/30/25 1:54am
Driving at 100 in a 70 zone constitutes speeding between 20% and 50% over the limit. The penalties for speeding and its hazards are introduced as follows: Speeding Penalty Standards: Speeding less than 10% results only in a warning, with no points deducted or fines imposed. Speeding between 10% and 20% incurs a 3-point penalty and a fine. Speeding between 20% and 50% results in a 6-point penalty and corresponding fines. Speeding over 50% leads to a 12-point penalty, corresponding fines, and revocation of the driver's license. Hazards of Speeding: Speeding affects the safety performance of the vehicle. It disrupts the vehicle's operational indices in specific environments, increases the vehicle's workload and stress, and accelerates the wear and tear of components. It is particularly detrimental to the tires, causing not only jump and skid wear but also raising friction temperatures, which can lead to rapid aging and deformation of the tires, increasing the risk of blowouts. Speeding also impairs the driver's ability to operate the vehicle promptly and accurately.
Was this review help?
4
4
Share
VanessaLynn
08/15/25 7:48am
I've been driving for many years, and I remember one time on the highway where the speed limit was 70 km/h. I pressed the accelerator harder and reached 100 km/h, which meant I was speeding by a full 30 km/h, roughly 43% over the limit. I was lucky that time—no police caught me—but a friend told me that such a significant speeding violation could result in a fine of several hundred yuan and points deducted from my license. The real issue is the risk. Data shows that for every 10% increase in speed, the probability of an accident rises by 10%. Just think about it: on a rainy day, the braking distance could jump from 40 meters at 70 km/h to 80 meters at 100 km/h. If something happened, regret would come too late. Drive steadily—don’t sacrifice safety for a momentary thrill. In short, speeding by 43% is no small matter. Safety first.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What are the methods to deal with excessive carbon monoxide in car exhaust?

Clean the three-way catalytic converter. Once this component is clogged or too dirty, it will lose its ability to convert carbon monoxide. Check the dashboard for any engine warning lights. If the air-fuel ratio of the engine cannot stabilize, incomplete combustion may occur.
8
1
Share

What to Do When the Battery is Undercharged and Won't Charge?

Check if the fuse has poor contact and reconnect it. Replace the wiring. If the battery has been used for a long time, the electrolyte may decrease, and it needs to be refilled. Replace the battery.
1
3
Share

How to Shift to Neutral in an Automatic Transmission Without Starting the Engine?

Turn on the power without starting the engine. Press the brake pedal and shift the gear. First shift to N (Neutral) gear, then start the engine, and then shift to D (Drive) gear. Release the parking brake. Lift your foot off the brake pedal and start driving.
17
0
Share

What is the simplest way to reset a car's ECU?

Drive for a while to allow the car to reach normal operating temperature, then park and turn off the engine, shutting down all electrical devices in the car. Open the car's hood, locate the battery, and disconnect the battery's power cables. Wait for 10 minutes before reconnecting, then turn on the power without starting the engine and activate the car's electrical devices, waiting for 30 seconds. Remove the key, and the reset is successful.
12
5
Share

What are the starting and parking procedures for the Volvo XC40?

Make preparations before starting the car. Press the start button to start the engine while holding down the foot brake. Shift the gear to D (Drive), gently release the foot brake to move forward, and press the accelerator pedal if acceleration is needed. Press the foot brake to stop the car. Shift to P (Park) and turn off the engine.
5
3
Share

What is the voltage of the ABS sensor connector?

The voltage of the ABS sensor connector is 5V to 8V, with an output voltage of 650mV to 850mV. During actual measurement, due to the fault protection function of the electronic stability control module, the voltage cannot be sustained after unplugging the ABS sensor connector, so voltage data cannot be used as a judgment criterion. The ABS sensor is an important component of the ABS system. ABS can maintain the directional stability of the vehicle during braking while driving, shorten the braking time and distance, and effectively prevent wheel lock-up and uncontrolled skidding during emergency braking, thereby enhancing the vehicle's controllability and making driving safer.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.