···
Log in / Register

How much oil should be added to a 1.5L displacement car?

4 Answers
PaisleeFitz
09/04/25 3:05am

Generally, small cars require about 4L of engine oil, as long as the oil level on the dipstick is between the minimum and maximum marks. Below is relevant information: 1. As a type of machinery, engines share common requirements for lubricating oil with general machinery, such as appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature performance requirements. However, engines are also a special type of machinery, and their requirements for lubricating oil have unique aspects. 2. Automotive engines operate in complex environments with significant variations in temperature, humidity, atmospheric pressure, and dust. Additionally, engine oil often contains elements like sulfur and lead, which can accelerate corrosion and wear on certain components.

Was this review help?
18
2
Share
DelWilliam
09/16/25 4:18am

To be honest, I've been driving 1.5L displacement cars for over a decade, like the Honda Civic or Toyota Corolla, with fuel tanks typically around 45 liters. I usually fill up to about 80% capacity, roughly 36 liters, leaving some space for fuel vapor to prevent overflow on hot days. Think about it - filling it completely might dirty the chassis and waste money. Tank sizes vary by model, starting from 40L for compact cars up to 50L for midsize vehicles. For fuel consumption, averaging 8L per 100km means a full tank can last over 500km on highways. But don't always fill up completely for daily driving - adjust based on your driving habits. A fuel-saving tip is to regularly maintain tire pressure and keep the engine efficient.

Was this review help?
12
0
Share
Expand All
Eleanor
10/30/25 4:53am

As an eco-conscious car owner, I've been driving a 1.5L displacement vehicle for years, emphasizing fuel efficiency. My urban commuting fuel consumption is about 9L/100km. With a typical 45L fuel tank, I usually refuel around 25L per week, which is just right. Avoid filling up too much at once - leaving space prevents expansion issues and saves resources. Choosing the appropriate gasoline grade like 92 octane saves money and reduces exhaust pollution. Here's an estimate: driving 1,200km monthly requires about 100L of fuel, and splitting this into 3-4 refuels is more economical. Combining short trips with walking helps reduce fuel consumption. Routine maintenance like cleaning air filters also improves fuel efficiency, killing multiple birds with one stone.

Was this review help?
14
0
Share
Expand All
ORowan
12/13/25 5:01am

Driving a 1.5L displacement car for decades has taught me that fuel tank sizes vary between 40 to 50 liters. Don't fill it up completely; 80% is sufficient to prevent fuel expansion. Fuel consumption depends on conditions: city driving often reaches 10L/100km, while on highways it drops below 7L—drive slower to save fuel. Refuel according to distance; for short trips, just a dozen liters per fill-up is enough, saving money and ensuring safety.

Was this review help?
4
5
Share
Expand All
More Forum Discussions

What to Do When There's Glue Residue All Over After Removing the Window Tint Film?

There are four methods to remove residual glue from car windows: 1. Use a cloth dipped in organic solvents or industrial alcohol, or high-concentration alcohol solution, and gently wipe the glass. Avoid direct contact with water; 2. Use a hairdryer to heat the glue on the glass until it softens. Once the adhesive strength weakens, the glue can be easily removed. For any remaining small traces, use nail polish remover to wipe them off; 3. Soak cotton or a cloth in vinegar and place it over the glue marks on the glass. Once the glue is thoroughly soaked, remove it bit by bit; 4. Use a cloth dipped in ethyl acetate to gently wipe the glue. After the glue comes off, use a clean cloth to completely dry the area.
18
3
Share

How to Replace the Air Filter in a 2017 CR-V?

17 CR-V air filter replacement method: Open the glove compartment on the passenger side, there are two clips, remove them and you can directly replace the filter. Open the glove compartment on the passenger side, there are two clips, remove them and you can directly replace the filter. Here is some related information about the air filter: 1. The meaning of the air filter: The air filter is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. 2. The function of the air filter: During operation, the engine needs to intake a large amount of air. If the air is not filtered, the dust particles suspended in the air will be sucked into the cylinders, accelerating the wear of the piston group and the cylinders. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air.
15
1
Share

How many days does it take to receive a traffic violation SMS after running a red light?

After running a red light, the illegal capture SMS is usually received within about 3 to 7 days, and at the latest, within about 13 days. However, some cities now offer "instant electronic police capture notifications," where you can receive an SMS notification within 5-10 minutes of being captured. But this notification does not equate to a violation; it serves only as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation SMS immediately; there is a delay, and the duration can vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. It is then compiled and forwarded to the relevant traffic police department staff for verification. Once confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS to the owner. After receiving the violation SMS, the vehicle owner must go to the traffic police department where the violation occurred to handle the matter within one month before the vehicle's annual inspection. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received beyond 15 days, it is likely that no violation was recorded. Traffic violation query methods: Traffic violation queries refer to checking motor vehicle violations of traffic management through online platforms or query terminals. Methods for checking vehicle violations include vehicle violation websites, phone queries, SMS queries, and mobile app queries. Website query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone query: To inquire about violations, you can call the local 114 (area code + 114) or 12580 for traffic violation confirmation. Violations can only be processed at the location where they occurred or at the vehicle's license plate issuance office. For on-the-spot violations, such as those directly caught by a traffic officer, they must be handled at the violation location. SMS query: Open the SMS interface on your phone, enter "WZ [license plate number] [license plate color]" in the message body, and send it to 1062650001. Mobile app query: Open the Traffic Management 12123 app, select "violation query," and clear any unresolved violations.
15
1
Share

How to adjust the time on Buick Excelle?

Buick Excelle The method to adjust the time on Buick Excelle is as follows: Press CONFIG on the central control settings, then enter the vehicle parameter settings, where the first option is for adjusting the time and date. Below is a related introduction to Buick Excelle: 1. Power: Equipped with a new generation 1.3L Ecotec dual-injection engine, matched with a CVT intelligent continuously variable transmission, with a maximum power of 79kW and a maximum torque of 133Nm, achieving a combined fuel consumption as low as 4.6L per 100km. 2. Interior: Continues the Buick family's 360-degree wraparound integrated design, adopting lightweight design elements overall. The central control panel features a high-contrast visual effect with integrated high-gloss black and chrome strips, highlighting a sense of technology. The seats use suede fabric material, which is rare in its class, providing a comfortable riding experience.
15
5
Share

How to Deal with Fog Inside the Car?

Solutions for fog inside the car are as follows: 1. Turn on the air conditioning: After the engine warms up, turn on the cold air blower, temporarily close other air ducts, and concentrate the airflow directly on the glass surface to quickly disperse the fog. 2. Open windows for ventilation: You can use the warm or cold air from the air conditioning to solve the problem. The car's air conditioning system has a defogging function for the windshield. 3. Use some defogging products: Before driving, you can spray a little on the windshield, rear window, four side windows, and the exterior rearview mirrors. This defogging spray forms a film on the glass surface, making it harder for fog to form.
9
1
Share

How to Remove the Toyota Camry Evaporator?

To remove the evaporator assembly, it is necessary to dismantle the dashboard, inner cylinder, steering wheel, blower assembly, wiring harness, and other components before disassembling and extracting the evaporator. Here is some relevant information about the evaporator: 1. Composition of the Evaporator: The evaporator mainly consists of two parts: the heating chamber and the evaporation chamber. The heating chamber provides the heat required for evaporation, promoting liquid boiling and vaporization; the evaporation chamber ensures complete separation of the gas and liquid phases. 2. Function of the Evaporator: As a crucial component among the four major refrigeration parts, the evaporator facilitates heat exchange between the low-temperature condensed liquid and the external air, absorbing heat through vaporization to achieve the cooling effect.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.