How much longer can National IV and National V vehicles be driven?

What is the reason for one of the four car doors not locking?

If the central locking system fails to lock one of the car doors, it is highly likely that there is a malfunction in the door lock actuator or the door lock controller. If this situation occurs, it is recommended that the car owner promptly visit a repair shop for inspection. Fault information can be quickly detected using diagnostic equipment. Relevant information about car doors is as follows: 1. Introduction: A car door provides access for the driver and passengers, isolates external interference, reduces side impacts to a certain extent, and protects the occupants. The aesthetics of the car are also related to the design of the doors. 2. Standards for good car doors: The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and other functional indicators. Anti-collision performance is particularly important because, during a side impact, the buffer distance is very short, making it easy to injure the occupants inside the vehicle.

10

5

Share

What are the consequences of using your driver's license to deduct points for others?

Using your driver's license to deduct points for others will result in the temporary suspension of your license, a fine, and in severe cases, detention for up to 15 days. Hazards of helping others evade points: Helping others evade points is also illegal. Accepting traffic violation penalties on behalf of the actual driver for economic gain will result in a 6-month suspension of your driver's license and a fine. Repeat offenders, as well as those who organize or introduce others to accept traffic violation penalties and point deductions for economic gain, will face detention for up to 15 days and a fine. Methods for handling traffic violations: Prepare the necessary materials for handling violations; check if the violation was committed by your vehicle; fill out the Traffic Violation Party's Voluntary Acceptance of Penalty Confirmation Form; after completion, the traffic department will issue a fine for payment.

2

Share

Principle of Correcting Direction During Vehicle Skidding

Because the braking is stopped, the wheels are released from the locked state, thus improving the lateral adhesion. Turning the steering wheel in the direction of the skid increases the turning radius of the vehicle to reduce centrifugal force. After the vehicle straightens, the steering wheel should be smoothly turned back to its original position. Below are precautions regarding correcting direction during vehicle skidding: Safe Passing: During driving, do not follow the vehicle in front too closely. When encountering an oncoming vehicle, pay special attention to observing the road surface. Do not randomly turn the steering wheel or brake during the encounter to avoid skidding and collision accidents. Preventing Skidding: If the front wheels skid, maintain steady throttle and correct the direction to drive out. When the rear wheels skid, turn the steering wheel in the direction of the skid and return to the road after the rear wheels straighten. When encountering rear wheel skidding while going downhill, you can appropriately tap the throttle to increase speed, and resume the original speed after the skid is eliminated.

6

5

Share

Should You Signal When Meeting Another Vehicle?

The Category 3 driving test does not require the use of turn signals when meeting another vehicle. Below is an introduction to the use of lights and techniques for meeting vehicles: Light Usage When Meeting Vehicles: During the Category 3 meeting vehicle test, when the voice prompt "Meeting vehicle ahead" is heard, the candidate must pay attention to the oncoming vehicle and drive along the right side of the lane until the meeting vehicle section ends. Be sure to yield to other vehicles and avoid crossing the non-motorized vehicle lane line. When meeting other vehicles at night, the low beam should be turned on. Meeting Vehicle Techniques: Drive According to Instructions Listen carefully to the voice instructions during the Category 3 test and follow them accordingly. Remember not to perform any actions before the voice instructions are completed; always wait until the instructions finish before proceeding to the next step.

4

5

Share

Where are Convince tires produced?

Convince tires are produced by Shandong Haohua Tire Company. When selecting tires, it is important to avoid mixing different types of tires. For example, do not combine tires suitable for off-road vehicles with those for regular cars, or mix directional sports car tires with standard tires. Below is some relevant information about tires: 1. Check the tire's expiration date: The sidewall of the tire will have a four-digit number indicating the manufacturing date, with the first two digits representing the week and the last two representing the year. Generally, tires should not be used for more than 3 years or exceed 60,000 kilometers in mileage. 2. Pay attention to the sidewall: As tire rubber gradually ages, deep grooves may appear on the sidewall. However, as long as the sidewall has not been impacted and the cords are not broken, the tire can continue to be used. The triangular mark on the tire sidewall can help the owner locate a protrusion in the tread groove, which indicates the actual wear limit of the tire. That value should be greater than 1.6 millimeters.

4

3

Share

What are the precautions for diesel vehicles entering Tibet?

Avoid the period from December to March. During winter in Tibet, temperatures are low, making it difficult to start diesel engines in cold conditions. If you must go, switch to low-temperature engine oil and diesel with a rating of -20 or -35. Try to choose Sinopec gas stations, as diesel vehicles are most sensitive to poor-quality diesel. The fuel quality at small gas stations in Tibet cannot be guaranteed. Here is additional information: For diesel vehicles entering Tibet, diesel fuel can form wax in low temperatures. If the diesel rating is unsuitable, it can affect the performance of the diesel engine. No. 0 diesel is suitable for use when the ambient temperature is above 0°C, while No. -35 can be used in environments above -35°C. No. -10 is for use above -10°C. Using winter diesel in summer has little impact on the vehicle, but using summer diesel in winter makes it difficult to start. No. -35 diesel is much more expensive than No. 0, but their combustion heat values are essentially the same. Therefore, choosing diesel suitable for the current temperature is crucial.

2

Share

How much longer can National IV and National V vehicles be driven?

What is the reason for one of the four car doors not locking?

What are the consequences of using your driver's license to deduct points for others?

Principle of Correcting Direction During Vehicle Skidding

Should You Signal When Meeting Another Vehicle?

Where are Convince tires produced?

What are the precautions for diesel vehicles entering Tibet?

Is it normal to drive 20,000 kilometers a year?

Why is it necessary to wash the car before delivery?

What are the reasons for the high fuel consumption of Shandeka trucks?

What is the normal tire pressure in summer?