···
Log in / Register

how much is it to fix a car axle

2 Answers
Irene
12/20/25 5:01pm

The cost to fix a car axle can range from $550 to $850 for a single axle on a typical passenger car, but the final price is highly dependent on your vehicle's make and model, the extent of the damage, and labor rates in your area. For a simple rear-wheel-drive car, you might pay on the lower end, while a repair on a 4WD or luxury SUV can easily exceed $1,500.

The primary factor is whether you need a repair or a full replacement. A bent axle must be replaced, while a broken CV joint—the part that allows the axle to flex with the suspension—might be serviced separately. Labor is a significant chunk of the cost, typically 2-3 hours of work.

Vehicle TypeAverage Parts Cost (Per Axle)Average Labor Cost (Hours)Typical Total Repair Cost
Standard Front-Wheel-Drive Car (CV Axle)$200 - $4001.5 - 2.5$550 - $850
Rear-Wheel-Drive Car (Solid Axle)$300 - $6002 - 3$700 - $1,200
4WD/AWD SUV or Truck$500 - $9002.5 - 4$1,000 - $2,000+
Luxury/Performance Vehicle$600 - $1,200+3 - 4+$1,500 - $2,500+

Other factors that influence the price include the brand of the replacement part (OEM vs. aftermarket) and your location. To save money, get quotes from several independent mechanics who specialize in your car's brand, as dealership labor rates are often highest. Ignoring a bad axle is dangerous; symptoms like loud clicking when turning or vibration under acceleration mean you should get it inspected immediately.

Was this review help?
20
1
Share
LeTaylor
12/28/25 5:43am

It really depends on your car. For my old sedan, a CV axle replacement was about $600 at a local shop. The dealer wanted almost a grand. If you hear a clicking sound when you turn, that's usually the sign. Don't wait on it—it'll only get worse and more expensive. Just call a couple of trusted mechanics for quotes; it's the fastest way to get a real number for your specific situation.

Was this review help?
13
2
Share
Expand All
More Forum Discussions

How often should the automatic transmission fluid be changed in a 2017 Passat?

17 Passat transmission fluid replacement cycle is 50,000 kilometers. The following are the functions of regular replacement of car transmission fluid: 1. Improved shifting performance: It can make shifting smooth and improve handling performance. 2. Reduced rust: It produces good oxidation resistance and reduces rust on mechanical parts. 3. Extended lifespan: Excellent extreme pressure additives provide optimal protection for gear sets. It offers the best anti-wear effect and extends the lifespan of the automatic transmission. When changing transmission fluid, it is important to choose high-quality branded transmission fluid, which can effectively protect gears, reduce wear, make vehicle operation easier, save fuel, extend the service life of the fluid, and reduce maintenance and repair costs.
13
2
Share

Are the engines of Venucia and Dongfeng Nissan the same?

Venucia and Dongfeng Nissan share the same engines. Venucia is a sub-brand of Dongfeng Nissan, and all Venucia vehicles are discontinued models from Dongfeng Nissan. Not only are the engines Nissan models, but the transmissions and chassis are also Nissan's. Here are some details about Venucia: 1. Exterior: Designed with the Wind Sculpture aesthetic concept, it incorporates numerous cutting and full-bodied elements, with waistlines exuding speed and sharpness, delivering a sense of sharpness, grandeur, dynamism, and futurism. 2. Interior: Features include a 12.3-inch large screen, a 5-inch 3D head-up instrument panel, IT-COMMANDER, and ambient lighting, offering a technological feel comparable to Audi.
16
0
Share

How to Set the Time on a 2017 Skoda Octavia?

The method to set the time on a 2017 Skoda Octavia is: 1. Locate the knob on the instrument panel, press and hold the button for about 2 seconds to reset the trip mileage; 2. Rotate left or right, and when the clock icon is flashing, you can adjust the time. The manufacturer of the 2017 Skoda Octavia is SAIC Volkswagen Skoda, classified as a compact car, equipped with a 1.6L L4 engine. The dimensions of this car are 4659mm in length, 1814mm in width, and 1460mm in height, with a wheelbase of 2686mm. It is a 5-door, 5-seat hatchback with a 5-speed manual transmission and a top speed of 190 km/h.
5
4
Share

Where is the Cabin Air Filter Located in the Cadillac XT228?

Cadillac XT228's cabin air filter is located inside the glove compartment on the passenger side. To access it, remove the damping cord on the door side of the glove compartment, pull downward from either the exterior or interior, and you will see the cabin air filter cover. Then, release the clip to open the cover and access the filter. Relevant information about the cabin air filter is as follows: 1. The cabin air filter is installed in the vehicle's air conditioning system to absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. 2. The cabin air filter can adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; it has strong and long-lasting moisture absorption capabilities; it ensures the filter tightly fits the housing to prevent unfiltered air from entering the cabin; and it separates solid impurities such as dust, pollen, and grinding particles from the air.
8
3
Share

Where is the central locking control box located in the Excelle?

The central locking control box in the Excelle is located beneath the center console. The central locking system refers to the central control door lock, which enhances both convenience and driving safety. The Excelle is a compact car under the SAIC-GM Buick brand, with exterior dimensions of 4468mm in length, 1765mm in width, and 1469mm in height, and a wheelbase of 2611mm. It features a 4-door, 5-seater sedan body structure. The Excelle is equipped with a 1.3L naturally aspirated engine, with an L-type cylinder arrangement and multi-point electronic fuel injection. It is paired with either a 5-speed manual transmission or a continuously variable transmission (CVT). The vehicle's suspension system consists of a MacPherson strut independent front suspension and a compound torsion beam non-independent rear suspension, with a front-engine, front-wheel-drive layout.
16
0
Share

What is the solution when the car's brake warning light comes on?

When the car's brake warning light comes on, the solution is to replace the brake pads. This situation occurs when the brake pads are severely worn. Brake pads come in two types: those with sensor wires and those without. When the brake pads wear down to the limit position, the sensor wire will automatically connect to the circuit, causing the warning light to illuminate. Brake pads, also known as brake linings, are critical safety components in the car's braking system. The effectiveness of all braking actions is determined by the brake pads, making high-quality brake pads the guardian of both the driver and the vehicle. Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.