···
Log in / Register

How much is 6.7 liters per 100 kilometers in terms of per kilometer?

4 Answers
StKyle
07/29/25 10:13pm
0.067L per kilometer. Below is relevant information about car fuel consumption: 1. Fuel consumption and displacement: Although fuel consumption is related to displacement, this relationship is not absolute. A larger cylinder volume (displacement) can accommodate more combustible mixture (air-fuel), so under otherwise identical conditions, an engine with a larger cylinder volume (displacement) will inevitably have better/higher power/fuel consumption. 2. Fuel consumption and RPM: During daily driving, the RPM range is generally between 1000-3000 RPM, and the maximum RPM for ordinary family cars is only around 6000 RPM. However, racing cars maintain operation at twice the maximum RPM of family cars (over 10,000 RPM) during races, naturally resulting in higher fuel consumption.
Was this review help?
11
5
Share
CamillaFitz
08/15/25 10:33pm
I've been driving for ten years and always find it necessary to understand fuel consumption calculations. A fuel consumption of 6.7 liters per 100 kilometers means the car uses 6.7 liters of fuel to travel 100 kilometers. To calculate it per kilometer, simply divide by 100, resulting in 0.067 liters per kilometer. In simple terms, for every kilometer driven, the car consumes 0.067 liters of fuel, which is quite fuel-efficient. To calculate the cost, assuming the fuel price is 7 yuan per liter, it costs approximately 0.47 yuan per kilometer. You can save even more by paying attention to driving habits, such as maintaining a steady speed between 60-80 km/h, avoiding sudden acceleration, keeping tire pressure at the right level to reduce friction, and not carrying unnecessary items in the car. Lower fuel consumption means saving hundreds of yuan on monthly commutes, and the advantage is even more noticeable on long trips. Regular vehicle maintenance is also crucial—a clean air filter improves engine efficiency.
Was this review help?
9
1
Share
Expand All
Sylvia
10/17/25 8:24am
I usually enjoy delving into details when it comes to cars, and fuel consumption calculation is actually quite straightforward. For example, 6.7 liters per 100 kilometers can be converted to consumption per kilometer by dividing 6.7 by 100, resulting in 0.067 liters per kilometer. This small number indicates good efficiency. To calculate the specific cost, multiply by the fuel price—assuming 7 yuan per liter, the cost per kilometer is approximately 0.47 yuan. There are many fuel-saving tips: avoid aggressive driving, steer clear of peak-hour traffic, don’t set the air conditioning to maximum, and maintain good vehicle condition—all of which can reduce fuel consumption. Understanding this helps you better control expenses and avoid wasting money on fuel. Over the long term, choosing a fuel-efficient car can also make a small contribution to environmental protection.
Was this review help?
2
2
Share
Expand All
JoshuaLynn
12/01/25 2:21am
I just learned to drive not long ago, and the concept of fuel consumption is still quite new to me. Using 6.7 liters of fuel per 100 kilometers means consuming 6.7 liters for every 100 kilometers driven. Calculating the fuel consumption per kilometer is straightforward—just divide by 100, resulting in 0.067 liters per kilometer. This number is quite small, meaning only a tiny amount of fuel is used per kilometer, making it economical and practical. To estimate the cost, if the fuel price is around 7 yuan per liter, it costs less than 0.5 yuan per kilometer. By maintaining a steady speed and avoiding overloading, fuel consumption can be even lower. Remembering this little tip makes driving more reassuring, saving money while being eco-friendly.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

What does it mean when the ECO light on the car dashboard is on?

When the eco indicator light on the car is on, it indicates that the vehicle's economy mode has been activated. ECO is an English abbreviation, derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. Eco mode is categorized into active and non-active types, with the difference being that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light will immediately illuminate, and the vehicle will automatically begin adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button. When the dashboard eco indicator light is on, it serves merely as a reminder function. The eco system automatically evaluates driving behavior, and if the current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most cars use the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, the eco mode can be activated. However, it is unnecessary to turn on the eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills, as it does not reflect the fuel-saving characteristics of the eco mode. In addition, the eco mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 kilometers per hour, the car will prioritize speed, and the eco mode will automatically deactivate. During idle parking or when in N/P gear or manual mode, the eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine computer will prioritize ensuring sufficient power to drive the vehicle, and the eco mode will not function.
19
3
Share

What is the warranty period for the Sylphy?

5 years or 150,000 kilometers. According to Article 17 of the "Regulations on the Repair, Replacement, and Return of Household Automotive Products," the warranty period for household automotive products shall not be less than 3 years or 60,000 kilometers, whichever comes first. The three-guarantee validity period for household automotive products shall not be less than 2 years or 50,000 kilometers, whichever comes first. The warranty period and three-guarantee validity period for household automotive products shall be calculated from the date the seller issues the vehicle purchase invoice. Below is more related information: Article 12 of the "Regulations on the Repair, Replacement, and Return of Household Automotive Products" states that when selling household automotive products, the seller shall meet the following requirements: 1. Deliver qualified household automotive products and invoices to consumers. 2. Deliver accompanying tools, spare parts, and other items to consumers according to the vehicle item list and other accompanying documents. 3. Inspect the appearance, interior, and other quality conditions of the household automotive product on-site in the presence of the consumer. 4. Clearly indicate and deliver the product manual, three-guarantee certificate, maintenance manual, and other accompanying documents. 5. Clearly indicate the three-guarantee terms, warranty period, and three-guarantee validity period for the household automotive product. 6. Clearly indicate the repair network information, including the name, address, and contact number of the repairer agreed upon by the manufacturer, but shall not restrict consumers from freely choosing a repairer from the aforementioned repair network. 7. Fill in relevant sales information on the three-guarantee certificate. 8. Remind consumers to read safety precautions and follow the instructions in the product manual for use and maintenance.
5
0
Share

ETC Installation Location?

For small cars, the ETC device is generally installed on the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed on the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have it installed later, which may affect the signal transmission of the microwave communication link, the device should be installed in the microwave skylight zone. ETC stands for Electronic Toll Collection, an electronic toll system. To apply for ETC, the vehicle owner needs to provide valid identification and the original and photocopy of the vehicle registration certificate. If the application is made by someone other than the owner, the agent's valid identification is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection seal. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for official vehicles: An introduction letter from the vehicle owner (with official seal); a photocopy of the organization code certificate or business license (with official seal); the original ID of the agent; the original vehicle registration certificate; and the vehicle for which ETC is to be applied. Here are some precautions for ETC installation: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the device is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll deduction for the preceding vehicle. The ETC lane recognizes vehicles at a speed of 20 km/h; driving too fast may result in failure to read the vehicle's device information and unsuccessful toll deduction. When using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
15
0
Share

What are the symptoms of a faulty transmission valve body in an Audi A6?

The symptoms of a faulty transmission valve body in an Audi A6 are that the spool valves on the valve body move left and right to change the flow direction and pressure of the hydraulic oil, enabling the automatic gear shifting by engaging the clutches and brakes of different gears. Sticking or leakage of the valves can lead to gear shift shocks, low transmission efficiency, and poor power performance. Relevant information about the Audi A6 is as follows: 1. Performance Configuration: The new Audi A6L adopts a five-link front suspension design, balancing the necessary rigid connection for sportiness and comfort with low static stiffness. Among them, the hydraulic frame damping support significantly improves driving comfort and effectively reduces the impact and jolt when passing over speed bumps or uneven road surfaces, thereby reducing the impact on the lumbar spine. The hydraulic damping support is also applied to the optimized rear subframe, greatly improving vibration comfort and reducing longitudinal moments generated by tire-road contact and uneven moments caused by the rear axle's rotation. This technology was previously applied in the Audi Q5 and received unanimous praise from the media and customers. In addition to the damping supports used in the suspension system, the powertrain of the new Audi A6L also employs numerous hydraulic damping supports, significantly enhancing engine vibration and noise comfort. 2. Interior Atmosphere: The new Audi A6L has undergone extensive work in interior design and material selection. According to surveys, Audi A6 drivers spend more time in their cars than average, so Audi A6 users require a relaxed and comfortable driving atmosphere during long drives. The standard interior of the new Audi A6L already fully meets this demand. On this basis, further options such as Silhouette fabric, Milano leather, and Valcona leather, complemented by decorations made of glazed black plastic, aluminum alloy, ash wood, and brown walnut wood, provide even more upscale interior choices.
5
5
Share

Why Can't the Manual Transmission Reverse Gear Engage?

Reasons why the manual transmission reverse gear is difficult to engage: The clutch pedal is not fully depressed, or the gear teeth happen to align. Here is some relevant information: Inside the structure of a manual transmission, there is a very important component called the "synchronizer." Without a synchronizer, forcing a slowly rotating gear into a high-speed rotating gear would inevitably cause gear grinding. The function of the synchronizer is to match the speed of the gear about to be engaged with the speed of the output gear during a gear shift, thus preventing gear grinding. This allows the gear to be engaged smoothly.
3
2
Share

Where does Renault belong to?

Renault is a French automobile brand. Models under the Renault brand include: Koleos, Kadjar, Fluence, Renault City K-ZE, Laguna, etc. Taking the 2019 Renault City K-ZE as an example, it belongs to the small SUV category with body dimensions of: length 3735mm, width 1579mm, height 1484mm, wheelbase of 2423mm, and curb weight of 921kg. The 2019 Renault City K-ZE features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a permanent magnet electric motor with a maximum power of 33kW and maximum torque of 125Nm, paired with a single-speed fixed gear ratio transmission.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.