How much horsepower does the Porsche Panamera have?

What Are the Causes of Steering Wheel Noise When Turning in Winter?

The main causes of noise when turning the steering wheel include insufficient lubrication of the steering column, excessive friction, lack of power steering fluid; universal joint failure; aging of the suspension stabilizer bar bushings; and failure of the thrust bearing. If the steering column has excessive friction, power steering fluid should be added promptly. The steering column is a type of steering column locking device, primarily composed of a lock rod, camshaft, lock stopper, unlock lever, and unlock button. If the universal joint fails, it can alter the vertical bouncing angle and should be replaced immediately; otherwise, it may prevent the car from operating normally. Its function is to accommodate power transmission, steering, and the angle changes caused by vertical bouncing during vehicle operation. Aged suspension stabilizer bar bushings should be replaced promptly, and regular inspections of these components should be conducted to prevent failures. Thrust bearing failure can cause the vehicle to pull to one side, so pressurization or depressurization treatment is required, which should be performed at a repair shop. The automotive thrust bearing, also known as the pressure bearing, withstands vertical pressure and allows free rotation.

17

1

Share

Is the Wlander's Transmission Belt-Driven?

The Wlander's transmission is belt-driven. The Wlander is equipped with a 10-speed continuously variable transmission (CVT), which can simulate 10 gears. It incorporates a set of starting gears, utilizing gear drive when in low gears (1st and 2nd), while employing belt drive for gears 3 to 10, ensuring smoother power delivery. Transmission Maintenance Methods: Regular Transmission Inspection: It is essential to regularly check the transmission fluid level to ensure it remains within the specified range. Top up the fluid as needed based on actual working conditions, ensuring the new fluid is of the same type. When changing the fluid, drain the old fluid while the transmission is operating and clean the system thoroughly. Regularly inspect the working condition of the transmission gears to ensure optimal meshing between gears, clean them periodically, and maintain proper alignment between gears and shafts. Inspect Connection Points: During routine maintenance, examine the condition of various connection points in the transmission to promptly identify issues such as looseness, wear, or damage. Tighten any loose connections immediately and repair or replace damaged parts as necessary. Regularly check for oil leaks at the shaft-end seals and external joints, replacing failed seals and gaskets promptly.

20

3

Share

What is the New Energy Vehicle Subsidy Policy?

2018 The new energy vehicle subsidy policy was officially implemented on June 12, 2018. The transition period was from February 12, 2018, to June 11, 2018. The new policy stipulates that the subsidy amount for new energy vehicles is not only based on the driving range but also takes into account two important factors: battery energy density and vehicle energy consumption. Relevant details are as follows: 1. Subsidy content: During the transition period, new energy passenger vehicles and new energy buses registered during this period received subsidies at 0.7 times the 2017 subsidy standard; new energy trucks and special-purpose vehicles received subsidies at 0.4 times the standard, while the subsidy standard for fuel cell vehicles remained unchanged. It is also important to note that, in addition to national subsidies, local governments may provide additional subsidies. According to national regulations, local government subsidies per vehicle must not exceed 50% of the central government's subsidy per vehicle. 2. Subsidy standard reduction: During the "13th Five-Year Plan" period, the government implemented subsidy policies for pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles, with subsidy standards gradually decreasing each year. Specifically: the subsidy standard for 2017-2018 was reduced by 20% compared to 2016, the subsidy standard for 2019-2020 was reduced by 40% compared to 2016, and after 2020, the subsidy policy was completely phased out.

8

2

Share

Is It Worth Buying a Used Car?

If the car has been well-maintained, it is worth purchasing. Generally, used cars that are 3-5 years old offer the best value for money, while those aged 6-8 years have the advantage of being more affordable, making them suitable for classic models. Cars older than 10 years are not recommended due to poorer condition and higher maintenance costs. The details are as follows: 1. Calculation Method: The used car market widely adopts the "10-year depreciation" method. For a new car, the depreciation is calculated as follows: the first 3 years at 15% annually, the next 4 years at 10% annually, and the final 3 years at 5% annually. 2. Depreciation: The first 3 years see the highest depreciation. For example, a car originally priced at around 100,000 yuan would be worth approximately 85,000 yuan after one year (an 85% resale value). After two years, it would depreciate further to 72,250 yuan (85% of 85,000 yuan), and by the third year, it would be worth 61,450 yuan. In terms of depreciation ratio, a 3-year-old used car offers the highest discount and represents the most cost-effective option.

18

3

Share

What Does Commuter Vehicle Mean?

Commuter vehicles, also known as lazy cars, refer to transportation tools and aids primarily used for commuting purposes. In China, they can sometimes refer to commuting cars, electric bicycles, electric scooters, two-wheel self-balancing scooters, or unicycle balancing scooters. The following are precautions for battery maintenance of commuter vehicles: 1. Drive according to road conditions: Mainly, avoid bumpy roads as much as possible. When going uphill, crossing bridges, or driving against the wind with heavy loads, be sure to slow down. This helps avoid excessive current discharge from the battery, reduces impact damage to the battery, and also enhances the battery's range and lifespan. When driving a commuter vehicle in winter, try not to maximize the horsepower to avoid power shortages caused by reduced battery capacity in low temperatures, which also helps extend the battery's lifespan. 2. Charge promptly: Never store a commuter vehicle in a discharged state. Storing the battery in a discharged state can easily lead to sulfation, where lead sulfate crystals adhere to the plates, blocking ion channels and resulting in insufficient charging and reduced battery capacity. The longer the battery remains idle in a discharged state, the more severe the damage. Therefore, even when the commuter vehicle is not in use, it should be charged once a month to maintain the battery's health. 3. Avoid high-current discharge: When starting, carrying passengers, or going uphill, try to avoid instantaneous high-current discharge. High-current discharge can easily lead to the formation of lead sulfate crystals, thereby damaging the battery's physical performance.

2

4

Share

What are the hidden features of the 2017 X-Trail?

1. One-touch window control for the driver's seat: With the vehicle powered on, pull up the driver's side window switch until the window is fully closed and hold for 5-10 seconds to complete the one-touch window setup. 2. Auto-lock function setup: Enter the car and close the door. Without pressing the brake, press the power button twice, then press and hold the lock button for 5-10 seconds. The hazard lights flashing indicates the setup is complete. Repeat the operation to disable. 3. Battery discharge protection: After parking and turning off the engine, and completely closing the doors, the vehicle will automatically cut off power supply after 1 hour in ACC state to prevent excessive battery discharge. 4. Remote headlight control: For example, if you need the car's headlights to illuminate your way home, you can leave the doors unlocked and the headlights on. Once home, simply lock the doors with the remote key, and the headlights will turn off simultaneously. 5. Vehicle locator: Press and hold the lock button, and the vehicle will emit a sound. 6. Window control after engine off: Within 30 seconds of turning off the engine, you can still operate the windows without opening the doors. 7. Auto-relock: After unlocking with the remote key, if the doors are not opened within a certain time, the vehicle will automatically relock.

10

1

Share

How much horsepower does the Porsche Panamera have?

What Are the Causes of Steering Wheel Noise When Turning in Winter?

Is the Wlander's Transmission Belt-Driven?

What is the New Energy Vehicle Subsidy Policy?

Is It Worth Buying a Used Car?

What Does Commuter Vehicle Mean?

What are the hidden features of the 2017 X-Trail?

Can full synthetic engine oil last for one year?

Why Do Motorcycles Easily Stall in the Rain?

What materials are needed for a temporary license plate?

What does high-pressure common rail in diesel engines mean?