···
Log in / Register

How much horsepower does the D25 engine have?

5 Answers
MacRowan
07/23/25 9:29pm

D25 engine has 143 horsepower. The following is a detailed introduction to the D25 engine: 1. Models: D25TCID1, D25TCID2, D25TCID3, D25TCID4. 2. Parameters: 492 engine, cylinder bore 92mm, stroke 94mm. The displacement is not large, at 2.499L, using technologies such as turbocharged intercooling, double overhead camshafts, and electronically controlled high-pressure common rail, with a compression ratio of 16.6:1. The maximum power is 105kW for the D25TCID1, corresponding to 142.8 horsepower, rounded to 143 horsepower, which is similar to the 141 horsepower of the Cummins 3.8L. 3. Customers: Jianghuai Automobile, Sichuan Hyundai, Chengdu Dayun, Sinotruk Wangpai, Shandong Wuzheng, and Shandong Kama, etc.

Was this review help?
1
2
Share
Una
08/10/25 5:09pm

Bro, I've been looking into the Dongfeng D25 engine recently. It typically delivers horsepower between 120 to 150 HP, commonly used in light trucks and vans driven by experienced drivers. The exact horsepower depends on the model version—for example, the standard version offers 125 HP, while the high-power version can go up to 150 HP or more. This kind of power is especially effective when hauling cargo or driving on mountain roads, ensuring a smooth start without lag. I've seen many car enthusiasts complain about the lower horsepower versions struggling on uphill climbs, but fortunately, the D25 is well-tuned for fuel efficiency, making it relatively economical to run. If you're buying a vehicle, I recommend checking the configuration manual first—don’t just rely on advertised specs; the actual driving experience is what really matters. Don’t skimp on maintenance either—keeping the air filter clean helps the engine perform better, and changing the oil regularly extends its lifespan.

Was this review help?
8
0
Share
Expand All
DiMicah
09/23/25 5:01am

After driving for so many years, I can tell you that the Dongfeng D25 engine's horsepower is generally fixed at around 125 hp. Mainstream light transport vehicles like pickup trucks use this heart. Too little horsepower can't handle heavy loads, but 125 hp is just enough for city deliveries. The models I've handled climb hills smoothly without gasping for breath. I remember one time when fully loaded on a long trip, the 140 hp version was more fuel-efficient and safer. When choosing, consider the purpose: 120 hp is sufficient for daily use, while high-altitude areas or heavy loads require higher specs. Briefly on factors affecting horsepower: fuel quality and tire wear can drag it down, check for spark plug aging, and avoid prolonged high RPMs damaging the engine. Regular maintenance stabilizes horsepower output—don't wait for a breakdown to fix it.

Was this review help?
4
4
Share
Expand All
Humbert
11/06/25 7:16am

I've worked on quite a few D25 engines, with horsepower generally ranging from 120 to 150 HP. For example, 135 HP is common in light trucks. This is determined by displacement and turbocharging, so always check the actual value on the label or manual instead of guessing. Low horsepower is usually due to fuel system or air filter issues. During maintenance, use diagnostic tools for accurate measurements to avoid unnecessary part replacements and wasted money. From a related perspective, higher horsepower means faster acceleration but increased fuel consumption, so this balance must be considered during design. I recommend owners regularly clean carbon deposits to maintain efficiency, test drive to confirm sufficient horsepower before buying used vehicles, and keep maintenance costs under control.

Was this review help?
9
0
Share
Expand All
Axel
12/28/25 2:13am

When choosing a car, I focus on the D25 engine with approximately 130 horsepower, which provides sufficient power for daily use and cargo hauling without feeling sluggish. Fuel efficiency is its key advantage. A higher horsepower of 150 would consume more fuel, while the 120-horsepower version is more economical for family use. Always verify the model when purchasing, as horsepower may vary across different years, leading to noticeable differences in highway performance. Maintenance is relatively straightforward—just ensure the cooling system doesn’t overheat, as it can affect power output, and change the engine oil according to the manual to extend its lifespan. From a cost-saving perspective, moderate horsepower ensures hassle-free maintenance.

Was this review help?
8
2
Share
Expand All
More Forum Discussions

What are the effects of water in gasoline on the engine?

If there is water in the gasoline, it will affect the normal combustion of the gasoline in the cylinder, leading to symptoms such as abnormal engine shaking, poor acceleration, and difficulty starting. Below is some relevant information about automotive gasoline: 1. Overview: Automotive gasoline is a liquid fuel refined from petroleum, mainly used for cars and motorcycles. 2. Classification: In China, automotive gasoline is divided into unleaded and leaded types. The unleaded types have octane ratings of 90, 93, and 95 RON (Research Octane Number). The leaded types have octane ratings of 90, 93, and 97 RON. Among them, the lead content in 90 RON does not exceed 0.35g/L, while the lead content in 93 and 97 RON does not exceed 0.45g/L.
11
4
Share

What are the impacts of transferring a driver's license registration location?

Transferring a driver's license registration location has no impact on the individual. Below are the relevant details regarding changes to driver's license information: 1. Explanation: Within the jurisdiction of the vehicle management office, if the information of the motor vehicle driver recorded on the driver's license changes, the driver must apply for a replacement license at the vehicle management office that issued the original license within 30 days. When applying, the driver must fill out an application form and submit their identity proof and the original driver's license. 2. Notes: If the driver's household registration is moved out of the original vehicle management office's jurisdiction, they must apply for a replacement license at the new jurisdiction's vehicle management office. When applying, the driver must fill out an application form and submit the following documents: the driver's identity proof and the original driver's license.
20
1
Share

Is it necessary to opt for FSD when buying a Tesla Model 3?

It is not necessary to opt for FSD when buying a Tesla Model 3, as FSD cannot be legally used on Chinese roads. Here are the specific details about the Tesla Model 3: 1. Vehicle Positioning: The Model 3 is a mid-sized electric vehicle with a wheelbase of 2875 mm, and dimensions of 4694 mm in length, 1850 mm in width, and 1443 mm in height. 2. Powertrain: The Model 3 is available in both rear-wheel drive and all-wheel drive versions. The all-wheel drive version is a dual-motor model, while the rear-wheel drive version is a single-motor model. The total power output of the all-wheel drive version is 340 kW, with a total torque of 639 Nm. The rear-wheel drive version has a maximum power output of 202 kW and a maximum torque of 404 Nm. 3. Battery: The Model 3 is equipped with ternary lithium batteries across all variants, which offer higher energy density and are lighter in weight.
17
4
Share

What to Do When Car Window Fails to Roll Up or Down?

Window one-touch up/down malfunction can be restored by pulling up or pressing the corresponding window switch and holding it, raising the window glass to the top, then releasing the window switch and pulling up or pressing it again. Relevant details are as follows: 1. One-touch window refers to a system where the car window glass can be controlled to move up or down to position with one press. Cars equipped with one-touch windows have a two-stage window control switch. The first stage works like a regular power window. The second stage allows the window to fully open or close automatically with a single press and release. In contrast, regular power windows require holding the switch until the window reaches the desired position, then releasing to stop the movement. 2. Nowadays, most mid-to-high-end models are equipped with one-touch window functions, mainly for the convenience of drivers and passengers, avoiding distraction from operating windows and improving safety. One-touch windows generally feature an "anti-pinch" function to prevent the risk of pinching fingers.
4
3
Share

How to Turn on the High Beam in Lavida?

Lavida's high beam control switch is located on the combination light lever on the left side of the steering wheel. To turn on the high beam, first activate the low beam by rotating the light knob, then press the combination light lever downward to engage the high beam. The high beam indicator on the dashboard will illuminate simultaneously. Below are related instructions for Lavida's high beam: The procedure for replacing the high beam bulb in the Volkswagen Lavida is as follows: 1. After turning off the vehicle, wait for the engine to cool down completely before opening the engine hood to avoid burns from high engine temperatures. 2. After opening the hood, locate the dust cover of the headlight assembly, which is typically made of rubber. Remove the high beam dust cover to access the bulb base inside the headlight assembly, then disconnect the wiring harness connector. 3. Pinch the wire clip next to the base, and once the clip loosens, the bulb can be removed directly. 4. Install the new bulb, and please observe electrical safety precautions when handling electrical components.
6
3
Share

What are the effects if the heating wire breaks during film application?

Impurities left on the air conditioning filter can mold and breed bacteria, which may harm the health of drivers and passengers, and even induce respiratory diseases. The following is relevant information about electric heating films: 1. Introduction: Low-temperature electric heating film is a semi-transparent polyester film that generates heat when electrified. It is made by processing and hot-pressing conductive special ink and metal current-carrying strips between insulating polyester films. During operation, the electric heating film serves as the heating element, radiating heat into the space, warming the human body and objects first. Its overall effect is superior to traditional convection heating methods. 2. Heating Principle: The heating principle of electric heating films involves the carbon molecular clusters in the heating element producing "Brownian motion" under the action of an electric field. Intense friction and collisions occur between carbon molecules, generating thermal energy that is transmitted externally in the form of far-infrared radiation and convection, with an electricity-to-heat conversion rate of over 98%. The action of carbon molecules causes the system's surface to heat up rapidly. When the electric heating film heating system is installed on walls (or floors), thermal energy is continuously and evenly transmitted to every corner of the room.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.