How much horsepower does the CT5 gain with a stage 1 tune?

1 Answers
LeAngela
07/29/25 5:03pm
ct5 with a stage 1 tune achieves 280 wheel horsepower, with a 0-100km/h acceleration time under 5 seconds. Here are the specific details about the Cadillac CT5: 1. Body dimensions: The Cadillac CT5 is a mid-sized rear-wheel-drive B-segment sedan under the Cadillac brand. The car measures 4924mm in length, 1883mm in width, and 1453mm in height, with a wheelbase of 2947mm. 2. Powertrain configuration: All Cadillac CT5 models are equipped with a 2.0T turbocharged engine, which delivers a maximum power of 177kW and a maximum torque of 350Nm. The engine is paired with a 10-speed automatic transmission.
Was this review help?
20
3
Share
More Forum Discussions

What is the power consumption of a Tesla?

Tesla consumes approximately 100 kWh of electricity for a full charge (Model S 100D variant). The official NEDC range of this model is 579 km, which calculates to an electricity consumption of 100 kWh / 579 km = 0.173 kWh per kilometer. Here is additional information about Tesla: Body dimensions: The Tesla Model 3 has a length of 4694 mm, width of 1849 mm, height of 1443 mm, and a wheelbase of 2875 mm. Models: Tesla currently offers two variants for sale, namely the Performance version and the Long Range version, with ranges of 595 km and 590 km respectively.
20
3
Share

How to Install a Motorcycle Canopy or Sunshade?

Use a wrench to loosen the hexagonal screw of the rearview mirror, remove the mirror, place the canopy connecting rod between the rearview mirror and the motorcycle body, and then screw the rearview mirror back on. Insert the two sleeves (the black cylindrical parts) at the front of the canopy into the connecting rods, ensuring they are pushed in as far as possible. Pull the rear part of the canopy to the motorcycle's tailbox, and secure both sides to the motorcycle body with ropes. Connect the two thicker and stiffer rods to reinforce the canopy top, and then use the two longer and more flexible rods to support the side edges of the canopy for successful installation.
7
0
Share

What is the actual fuel consumption of the Mengshi?

The average fuel consumption of the Dongfeng Mengshi is 11.3L per 100 kilometers. The specific fuel consumption standard should be based on actual usage, as fuel consumption is related to various factors such as load, hill climbing, air conditioning usage, and low tire pressure. This model is equipped with a 6.5-ton engine, which results in relatively high fuel consumption. Common reasons for fuel consumption and solutions are as follows: Strengthen vehicle maintenance. The adjustment and maintenance of the vehicle affect engine performance and driving resistance. According to statistics, poor maintenance can increase fuel consumption by 10% to 20%. Owners should regularly perform routine maintenance at automotive repair shops, such as checking tire pressure, wheel alignment, adjusting brake friction pads and drum clearance, lubricating the vehicle chassis, changing engine oil on schedule, and inspecting filters. Each vehicle has its optimal fuel-efficient speed. Maintaining a speed close to the optimal fuel-efficient speed is the most economical. Generally, passenger cars are most fuel-efficient at speeds between 70 to 90 kilometers per hour (varies by model). At high speeds, the vehicle's resistance increases significantly (mainly air resistance). Proper refueling. Using higher-octane fuel is not necessarily better. If the fuel grade is too high or too low, it can lead to incomplete combustion, resulting in higher fuel consumption and even unstable engine operation. In severe cases, it can damage the engine and other critical components.
12
4
Share

What engine is in the Zhonghua 530?

Zhonghua H530 is equipped with a 4A92S engine from Aerospace Mitsubishi, with a displacement of 1.6L, maximum power of 87kW/5600-6000rpm, and maximum torque of 151Nm/4000rpm. The 4A92S engine is Mitsubishi's new-generation small-displacement engine that replaces the 4G series. In China, it is mainly produced by Aerospace Mitsubishi and has been installed in many independent brand models, with the most common being the 1.5L 4A91. The standard configuration of the 2017 Zhonghua H530 is as follows: 1. Safety features: Driver/passenger airbags, seatbelt reminder, rear child seat interface, tire pressure monitoring, ABS anti-lock braking, brake force distribution, and brake assist. 2. Braking and suspension: The front and rear brakes of the 2017 Zhonghua H530 are ventilated disc and disc types, respectively, with a handbrake for the parking brake. The front and rear suspensions are MacPherson independent suspension and torsion beam non-independent suspension, with electric power steering.
17
4
Share

Can hybrid cars still get green license plates in Shanghai?

Hybrid cars can get green license plates in Shanghai. Here is some relevant information about hybrid vehicles: 1. Concept: It refers to vehicles equipped with more than one power source: storage battery, fuel cell, solar battery, or generator set of internal combustion engine. Currently, hybrid electric vehicles generally refer to those with an internal combustion engine generator plus a storage battery. 2. Advantages: With hybrid power, the maximum power of the internal combustion engine can be determined according to the average required power, allowing it to operate under optimal conditions with low fuel consumption and less pollution. When more power is needed and the internal combustion engine is insufficient, the battery can supplement it; when the load is light, the surplus power can be used to charge the battery. Since the internal combustion engine can work continuously and the battery can be constantly charged, its range is the same as that of conventional cars.
17
0
Share

What cleaning agents can be used for dirty car interiors?

Multi-purpose foam cleaners are commonly used for cleaning car interiors. Since car interiors are mostly made of materials like leather, velvet, and fabric, foam cleaners can effectively remove stains from interior surfaces without causing secondary corrosion. They are also convenient to use – simply spray the foam and wipe it off with a soft cloth. Cleaning car seats: Cleaning methods vary depending on the seat material. For fabric seats, evenly spray foam cleaner on the surface, let it sit for 10-15 seconds, then wipe clean with a dry towel. Foam cleaner can also be used on leather seats, but it's best to test it on a hidden area first to check for color fading. If fading occurs, discontinue use. Alternatively, leather seats can be wiped with a damp, well-wrung towel, followed by leather conditioner for maintenance. Cleaning car headliners: Cover already cleaned interior areas with a cloth, then use a brush to remove dust and dirt from the headliner surface. Spray foam cleaner and let it sit for 2 minutes before wiping repeatedly with a cotton cloth. Cleaning car floor mats: Floor mats are usually removable, making it easier to clean the interior thoroughly. For cleaning car floors, it's best to have a car vacuum cleaner to remove dust from hard-to-reach areas. Other interior parts can also be cleaned with foam cleaner. However, note that if the foam sits too long, it will turn into water, so don't let it stay on certain surfaces for extended periods – wipe immediately after spraying.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.