···
Log in / Register

How Much Horsepower Does the Buick LaCrosse Engine Have?

4 Answers
DeAyla
07/29/25 6:36am

Buick LaCrosse engine has 241 horsepower. The entire lineup is equipped with a 2.0-liter turbocharged engine, with a maximum power speed of 5,000 revolutions per minute and a maximum torque speed ranging from 1,500 to 4,000 revolutions per minute. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The Buick LaCrosse is a mid-to-high-end sedan launched by SAIC-GM, with body dimensions of 5,026mm in length, 1,866mm in width, and 1,459mm in height. The car's exterior adopts the Buick family design language, with the front-end design extending backward from the Buick tri-color shield and waterfall grille, complemented by wing-shaped headlights and an integrated lower air intake grille, creating a sharp and powerful front face. The Buick LaCrosse is also equipped with LED daytime running lights and LED front and rear fog lights.

Was this review help?
16
1
Share
Kaden
08/12/25 10:21pm

I've been driving a Buick Regal for several years, with the engine horsepower generally around 237 hp, which provides ample power. For daily commuting, the car accelerates quickly from a standstill without any sluggishness. On the highway, overtaking is effortless, unlike some smaller cars that feel underpowered. Although the higher horsepower means slightly higher fuel consumption compared to smaller-displacement vehicles, a full tank can still cover around 500-600 kilometers, which is completely acceptable. Once, during a family trip with four adults and luggage, the car handled uphill climbs without any struggle, and the engine response remained stable. Overall, 237 hp is sufficient for family use or long-distance travel—there's no need to pursue higher horsepower and waste money on unnecessary fuel costs. Just remember to maintain it regularly, including oil changes, to keep the engine performance in top condition.

Was this review help?
10
3
Share
Expand All
KarterLee
10/04/25 3:48am

As a car enthusiast, I often ponder the engine configuration of the Buick LaCrosse. The mainstream model features a 2.0-liter turbocharged engine, delivering approximately 237 horsepower and around 350 Nm of torque. This power setup is designed for mid-to-large-sized sedans, striking a balance between robust output and fuel efficiency. Compared to the older V6's 310 horsepower, the new engine offers significantly lower fuel consumption, achieving a 0-100 km/h acceleration time under 8 seconds with responsive daily driving performance. Horsepower isn't the sole focus—transmission matching and smoothness are equally crucial. Based on long-term testing, the 237 horsepower proves ample for both city and highway driving, making it ideal for those seeking practicality without sacrificing performance. I recommend a test drive to experience its true capabilities firsthand.

Was this review help?
1
5
Share
Expand All
AdelynRose
11/17/25 5:22am

I find the Buick LaCrosse's engine horsepower of around 240 hp provides ample power for driving. It accelerates quickly in city traffic, avoiding honking from cars behind, and cruises effortlessly on highways with strong overtaking capability. For average drivers, this horsepower level is perfectly adequate. The fuel consumption is reasonable at about 0.6-0.7 RMB per kilometer. During car selection, I compared and found its power slightly stronger than peers in the same class, with smooth handling that's hassle-free. My advice is to focus on daily practicality rather than blindly chasing higher horsepower – this level strikes the right balance between performance and cost-effectiveness, being both economical and worry-free.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

Where is the enhanced transmission slot for the Envision key?

Enhanced slot location is under the cup holder cylinder to the right of the gear shift lever, activated via the key. Buick is an automobile brand marketed by General Motors in the United States, Canada, and China, encompassing many well-known models such as the Regal, LaCrosse, Encore, Envision, GL8 business traveler, and the premium Avenir line. Below are specific details about the Envision: Background: The Chinese name for the Buick ENVISION is 'Angkewei' (Envision). As GM's new global strategic model, the Buick Envision's exterior design inherits the essence of the ENVISION Vision concept car, presenting a dynamic, elegant, and imposing overall styling. Advantages: The front features a family-style waterfall chrome grille, wing-shaped intelligent xenon headlights, boomerang-shaped LED daytime running lights, and streamlined exterior rearview mirrors, creating a sharp and dynamic visual effect. The body incorporates full-frame integrated chrome window design, roof-line-following aluminum roof rails, and class-leading 19-inch large aluminum alloy wheels, delivering striking visual impact.
14
4
Share

Does a Leaking Driveshaft Need to Be Replaced?

If the driveshaft is leaking oil, it should be inspected and handled at a repair shop. Whether it needs to be replaced depends on the situation: 1. The driveshaft in the universal transmission device is the shaft that transmits power: It is a high-speed, low-support rotating body, so its dynamic balance is crucial. Generally, driveshafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine. For front-engine, rear-wheel-drive vehicles, the driveshaft transmits the rotation from the transmission to the final drive axle. It can consist of multiple sections connected by universal joints. The driveshaft is composed of an axle tube, a telescopic sleeve, and universal joints. 2. The driveshaft connects or assembles various components: The driveshaft connects or assembles various components while being a movable or rotatable circular part, usually made of lightweight and torsion-resistant alloy steel pipe. For front-engine, rear-wheel-drive vehicles, the driveshaft transmits the rotation from the transmission to the final drive axle and can consist of multiple sections connected by universal joints. It is a high-speed, low-support rotating body, so its dynamic balance is crucial. Generally, driveshafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine.
4
4
Share

What are the exterior differences between the Range Rover LWB and standard version?

Range Rover LWB and standard version mainly differ in exterior design: The Autobiography LWB features 21-inch wheels with 275 tire width (non-diamond-cut surface), and all LWB models have an 'L' badge uniformly designed below the shark gill vent on the side door protectors. Here's an introduction to the Range Rover: Land Rover Performance: The Range Rover is one of Land Rover's models, employing the latest body and chassis technologies to enhance both off-road capability (breadth and passability) and on-road handling/comfort. The vehicle's all-terrain performance reaches another level. Land Rover Advantages: The overall boxy exterior design offers spacious interiors, excellent handling, and fuel efficiency. Equipped with three different engines, it delivers abundant power to enhance both passenger and driver experiences. Range Rover Advantages: The Range Rover embodies 'British' luxury - referring to the material lifestyle traditionally admired by British aristocracy. In automotive terms, this translates to premium leather, fine wood trim, thick wool carpets, and jewel-like metal decorations.
19
4
Share

What to do if the sensor of Haval H6 is lost?

Haval H6 sensor lost needs to be replaced and installed in time. The detection method of the sensor is as follows: 1. Unplug the connector, turn the key to two gears, and use a voltmeter to measure and confirm that the power line has voltage output. 2. Use the meter to determine the ground wire. Use the voltage gear to connect one probe to the confirmed power line, and the other probe to the other two wires to measure the voltage. The one with voltage is the ground wire, and the remaining one is the signal wire. 3. At this time, turn off the key to lead out the signal wire, plug back the connector to start the engine, and measure the signal wire and the ground wire to see if there is a signal voltage output. The output voltage should be less than the power supply voltage. If not, the sensor is basically damaged. 4. At the same time as the above operation steps, check whether the signal teeth on the camshaft are good, whether there is any debris between the camshaft sensor and the signal teeth, and whether the gap is normal.
7
3
Share

How often should the Elantra spark plugs be replaced?

Elantra spark plugs should be replaced every 100,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have insulator skirts and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plugs are contaminated with oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, or that engine oil is leaking into the combustion chamber.
3
5
Share

What is the difference between engine oil 20 and 30?

The viscosity of engine oil differs, as does its sealing performance. Below is a detailed explanation of the differences between engine oil 20 and 30: 1. Different oil viscosity: The primary difference between 5W30 lies in the high-temperature viscosity of the oil. The distinction between 5W-20 and 5W-30 is merely the difference in the latter numbers. 5W20 has lower viscosity (ranging between 5.6-9.3), which is relatively more fuel-efficient and provides a lighter driving feel. On the other hand, 5W-30 has higher viscosity (ranging between 9.3-12.5), which is relatively more fuel-consuming and makes the throttle feel heavier, but results in quieter engine noise. 2. Different sealing performance: The higher the viscosity, the better the sealing performance. For engine oils 5W30 and 5W20, the number after the W represents the high-temperature viscosity. Therefore, 5W30 has better sealing performance than 5W20. However, a higher number is not always better, as higher viscosity leads to greater friction and consequently greater power loss in the engine.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.