How much horsepower does a 1.4T engine have?

1 Answers
VanKendra
07/30/25 6:52am
1.4T EA111 engine compared to 1.8L displacement. Here are the relevant details: Introduction: The 1.8T EA888 engine produces 160 horsepower, while the 2.0T EA888 engine delivers approximately 200 horsepower, equivalent to a 2.6L engine. The 1.6T ECOTEC generates 185 horsepower, comparable to a 2.4L engine. The 2.0T ECOTEC produces 240 horsepower, matching a 3.0L engine. Additional Information: A turbocharger is essentially an air compressor that reuses exhaust gases to drive a turbine in the turbo chamber, which in turn rotates a coaxial impeller. The impeller compresses fresh air from the air filter intake and delivers it to the cylinders.
Was this review help?
4
0
Share
More Forum Discussions

What is the installation method for the Octavia ashtray?

The specific installation steps for the Octavia ashtray are as follows: 1. First, install the spring. During installation, use a toothpick to secure the spring from inside the ashtray. If you have needle-nose pliers, this can be done easily. Be careful not to let the spring snap and injure your hand. 2. Next, install the ashtray housing. Insert the guide posts on both sides from the bottom as much as possible, ensuring they are not tilted. Once inserted, lift them upward, and they will be properly installed. 3. Then, install the rotating post. Start by threading the far end, allowing the wire of the rotating post to extend slightly, then align and thread it back through the near-end wire hole. 4. After that, install the panel. The trick is that there are two clips on both sides of the panel. Align them and press inward gently until you hear four clicks, indicating the panel is securely installed. Before installation, check the slots on the panel to prevent it from tipping over. 5. Finally, remove the toothpick from the bottom of the ashtray's inner wall. At this point, the spring will take effect, and the ashtray's switch will have damping. Insert the ashtray liner, and the installation is complete.
15
0
Share

What are the differences between the RX5-MAX and RX5?

The main differences between the RX5-MAX and RX5 are: 1. Different levels. The Roewe RX5-MAX is an upgraded version of the RX5. 2. Body dimensions. The Roewe RX5-MAX has larger body dimensions. The length, width, and height of the Roewe RX5-MAX are 4647 mm, 1891 mm, and 1725 mm respectively, with a wheelbase of 2760 mm. The length, width, and height of the Roewe RX5 are 4556 mm, 1855 mm, and 1719 mm respectively, with a wheelbase of 2700 mm. 3. Different powertrain options. In addition to the 1.5-liter turbocharged engine version, the Roewe RX5-MAX also offers a 2.0-liter turbocharged engine version as an option.
3
4
Share

What are the differences between the Tiguan L and the Tayron?

The specific differences between the Tiguan L and the Tayron are as follows: 1. Price and brand. The price difference between the two is not very large, but the Tiguan L is slightly more expensive for models of the same level. The Tiguan L belongs to SAIC Volkswagen, while the Tayron belongs to FAW Volkswagen. 2. Front face. The Tiguan L uses the standard Volkswagen family design, resembling a rugged American car. In contrast, the Tayron's front face appears more youthful, with a chain-like grille and polygonal elements. 3. Body dimensions. The Tiguan L measures 4712*1839*1673mm with a wheelbase of 2791mm, while the Tayron measures 4595*1860*1660mm with a wheelbase of 2731mm. The Tiguan L is considered a larger model among mid-size cars, whereas the Tayron is more of a large compact SUV. 4. Rear. The Tiguan L's rear features clean lines and distinctive tail lights with LED sources. The Tayron's rear appears more youthful, with tail lights that, while conventional in shape, have innovative internal designs full of technological flair. 5. Interior. The Tiguan L's interior follows a standard business style, lacking novelty but excelling in craftsmanship and materials. The Tayron's interior is more modern, with a dashboard slightly tilted towards the driver for better ergonomics. 6. Configuration. The Tiguan L offers higher-end configurations. 7. Power. Both the Tiguan L and Tayron are equipped with 1.4T and 2.0T engines, with minimal differences in power output.
18
3
Share

What is the solution for gear shift hesitation in the Tiguan?

Tiguan gear shift hesitation solutions mainly include: 1. First, pay attention to road conditions and load, and make timely adjustments. 2. Adjust the gear shifting sequence. The standard gear shifting sequence is progressive, i.e., 1-2-3-4-5, which can avoid the hesitation phenomenon. Extended content: 1. The Tiguan is equipped with two industry-leading engines, the 1.8TSI and 2.0TSI, which offer strong power and higher fuel efficiency, making it a model for the future. 2. The Volkswagen Tiguan comes standard with ESP body stability system, EBD electronic brake force distribution, and ASR traction control.
11
1
Share

What is the normal tire pressure for Jetour X70 Plus?

The normal tire pressure for Jetour X70 Plus is between 2.3-2.5 bar. Due to seasonal variations, slight fluctuations in tire pressure are normal and still fall within the acceptable range. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: standard tires should be inflated to 2.4-2.5 bar; reinforced tires should be inflated to 2.8-2.9 bar; the maximum pressure should not exceed 3.5 bar. In winter, the tire pressure should be adjusted to the standard tire pressure and can be slightly increased by about 0.2 bar. In summer, the tire pressure can generally be set to the lower limit of the standard tire pressure, such as 2.4 bar for standard tires. If the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1 bar to prevent tire blowouts due to high temperatures.
18
3
Share

What is the difference between 5w30 and 0w20 engine oil?

The difference between 5w30 and 0w20 engine oil lies in their applicable environmental temperatures: 5w30 engine oil is suitable for temperatures as low as -30 degrees Celsius, while 0w20 engine oil is suitable for temperatures as low as -35 degrees Celsius. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and parts; 4. To buffer the rise in pressure at the engine cylinder port. The characteristics indicating the need for an oil change are: 1. Check the oil viscosity—if there is no viscosity, the oil needs to be changed; 2. The oil color turns black; 3. Excessive black particles, metal shavings, or carbon deposits in the oil; 4. The oil has an unusual smell.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.