How Much Harm Does Radiation from New Energy Vehicles Cause to the Body?

1 Answers
McHayden
07/25/25 3:53am
Currently, the radiation from most new energy vehicles poses minimal harm to the body, with levels not even reaching one-tenth of the standard limits. In fact, these radiation values are even lower than those from everyday mobile phone use, so there's no need to worry about radiation from electric vehicles. The safety standards for electromagnetic wave radiation and electromagnetic fields are clearly defined by the World Health Organization (WHO): the safe standard for electric field radiation is 5000V/m, and for magnetic field radiation, it's 100μT. China's environmental evaluation standards also set a limit of 100μT, and radiation levels below this threshold are harmless to the human body.
Was this review help?
5
0
Share
More Forum Discussions

How often should Audi spark plugs be replaced?

Audi spark plug replacement cycle: Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the user manual. You can refer to the following maintenance standards for replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000-80,000 kilometers. Spark plug working principle: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block through the cylinder head. The insulator mainly serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and center electrode, it ionizes the medium between the center electrode and ground electrode to produce a spark, thereby igniting the air-fuel mixture in the cylinder.
19
5
Share

How long after successful subject one reservation to pay the fee?

Subject one reservation requires immediate payment upon successful booking. Do not delay too long, typically there is a half-day payment window after successful reservation. Failure to pay within the stipulated time will result in inability to schedule the exam normally. Additionally, there are no limits on subject one reservation attempts, but retakes require payment of a retake fee until passing the exam. Subject one exam precautions are as follows: 1. Note one: Candidates must present ID and admission ticket to enter the examination venue. 2. Note two: No need to re-enter personal information, simply verify and confirm before pressing the 'Start Exam' button. 3. Note three: Raise your hand to alert proctors if encountering computer system issues during the exam. 4. Note four: Avoid touching the submit button during the exam, and do not strike keys too forcefully when answering questions.
6
1
Share

How to Reset the Maintenance Light on a Chevrolet Captiva?

Method to reset the maintenance light on a Chevrolet Captiva: 1. Press and hold the reset button A while stepping on the brake pedal; 2. Turn the ignition switch to "on" without starting the engine; 3. The characters "INSP" will flash or the display will blink; 4. Continue holding down the reset button A; 5. Release the reset button A and then release the brake pedal; 6. Turn the ignition switch back to "Off." The reset process is now complete. Alternatively, you can use an automotive diagnostic tool to reset the maintenance light. The Chevrolet Captiva has dimensions of 4635mm in length, 1870mm in width, and 1755mm in height, with a wheelbase of 2705mm. The front suspension type is MacPherson strut, and the rear suspension type is four-link. The drivetrain is front-engine, four-wheel drive.
4
5
Share

What is the white color of the Baojun 310 white car?

Baojun 310 white car is Candy White. Body colors of Baojun 310: The Baojun 310 offers a variety of colors to choose from, including Candy White, Ocean Blue, Metallic Red, Brilliant Orange, Morning Glow Red, Polar Silver, Van Gogh Yellow, Sparkling Orange, and Chocolate Brown. Color and safety: According to statistical research by a foreign expert, white is the safest color for cars, with the lowest probability of injury even in accidents. The reason is that white car paint is more eye-catching and has higher visibility at night, making it easier for other vehicles to detect. Color and resale value: To consider resale value, it is essential to avoid less popular color schemes and cars with special colors. The reason is that while these colors may look good on new cars, over the years, due to paint oxidation, these colors can become unattractive. Additionally, if the car has a less popular or special color, repairs after scratches can be costly, and it can be difficult to match the exact paint color to the car body.
7
2
Share

What is the seat belt pre-tensioning function?

Seat belt pre-tensioning function refers to when there is a drastic change in vehicle speed, the retractor equipped with control and pre-tensioning devices can tighten the webbing in about 0.1 seconds, enhancing the restraint on occupants and locking the webbing to prevent the occupant's body from leaning forward, effectively protecting the safety of occupants. The following are specific details about seat belts: 1. Precautions: Do not drive or ride in a car with damaged seat belts, as they cannot provide adequate protection in a collision. When fastening or unfastening the seat belt, ensure that the belt is not twisted, otherwise, the twisted seat belt cannot absorb the impact force through its width during a collision. 2. Function: The car seat belt serves to restrain displacement and provide cushioning, absorbing impact energy, dissipating inertial forces, and preventing or reducing the extent of injuries to drivers and passengers.
17
2
Share

How much wear on brake pads requires replacement?

Brake pads need to be replaced when their thickness is reduced to 3.5 millimeters. More information about brake pads is as follows: 1. Brake pads are one of the most important components of a vehicle's braking system. The pressure from the braking system is transmitted to the brake pads through the piston caliper, and the friction between the brake pads and the brake disc generates the braking force that slows down or stops the vehicle. 2. Brake pads are also a consumable material on the vehicle. Generally, the decision to replace them is based on measuring the actual thickness of the brake pads. 3. Brake pads consist of three parts: a steel plate, adhesive material, and friction material. The effective working part of the brake pad is the friction material layer. Once the friction material layer is worn out, the braking performance of the brake pad will sharply decline. Therefore, when the brake pad wears down to the adhesive layer, it needs to be replaced. The thickness of the adhesive layer is approximately 3.5 millimeters, which means that brake pads should be replaced when their remaining thickness is 3.5 millimeters.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.