···
Log in / Register

How Much Fuel Should You Add to Your Car at One Time?

3 Answers
LaBrynlee
08/28/25 5:44am
When refueling your car, try not to exceed the safe capacity to avoid vehicle damage. Below is relevant information about car refueling:1. The accuracy of the fuel amount cannot be judged based on the rated capacity of the fuel tank. Because a car fuel tank is a container (it is not managed as a measuring instrument by the state) rather than a measuring instrument, it cannot be used as a basis for judging measurement accuracy. According to the requirements of relevant national mandatory standards, the rated capacity of a car fuel tank should be controlled at 95% of the maximum safe capacity.2. The engine must be turned off when refueling. Since gasoline is a flammable item and has volatile characteristics, when the concentration of gasoline molecules in the air reaches a certain level, there is a possibility of combustion or explosion upon encountering a spark.
Was this review help?
15
3
Share
KingAnn
09/10/25 4:08am
I've been driving for many years and always feel that filling up the gas tank completely is the most worry-free approach when refueling. This not only reduces the hassle of frequent trips to the gas station but also keeps the fuel pump submerged in the fuel, preventing overheating and extending its lifespan. Some might argue that filling half the tank can reduce weight and save a bit of fuel, but the benefits are too minimal compared to the time and effort saved. Especially on long trips, a full tank allows me to focus on driving without worrying about finding a gas station at any moment. Additionally, in extreme winter or summer weather, a shallow fuel tank may lead to moisture or debris accumulation, affecting engine performance. Overall, developing the habit of filling up every time is quite practical for daily maintenance.
Was this review help?
4
1
Share
Expand All
MacCassandra
10/24/25 4:57am
From a cost-saving perspective, I prefer adding a fixed amount, such as spending around 300 yuan each time. This makes it easier to control the budget and avoid impulsive spending, especially when fuel prices fluctuate significantly. However, don't add too little—less than half a tank will increase the number of trips to the gas station, and each extra drive consumes additional fuel, which can actually waste money. The ideal approach is to combine it with your driving distance. For short commutes, filling half a tank is sufficient; for long-distance driving, filling up is more cost-effective. Additionally, considering environmental factors, refueling less frequently means more frequent production of bottled gasoline, which slightly increases carbon emissions. Therefore, I recommend adjusting based on actual needs to balance economy and convenience.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

Which automobile company does the Lynk & Co 03 belong to?

Lynk & Co 03 is the third mass-produced model under the Lynk & Co automotive brand. Below are some details about this vehicle: 1. Exterior Design. The front features a split-type headlight assembly, paired with a horizontal front grille and lower decorative strip. The side profile maintains a traditional three-box sedan silhouette with smooth C-pillar lines, while the rear adopts 'L'-shaped taillights and a black decorative panel integrating reflectors. 2. Interior Design. The Lynk & Co 03 adheres to the brand's family design language, featuring a wrap-around sporty cockpit, a driver-centric integrated smart center console, race-inspired air vents, and a D-shaped sport steering wheel. The three-spoke steering wheel comes with multifunction buttons and is complemented by a digital instrument cluster. 3. Powertrain. The Lynk & Co 03 is powered by a 1.5TD high-efficiency engine from the Drive-E series. The turbo engages at 1000 rpm, delivering 150N·m of torque, and reaches its peak torque of 265N·m at 1500 rpm.
11
4
Share

How to reset the tire pressure light on Emgrand GL?

Emgrand GL tire pressure light reset method: Inflate the tires to the standard pressure to eliminate the tire pressure light; or press the MENU button on the turn signal lever, select the tire pressure display item in the mileage/fuel information menu, and then press the Set/Clr button. The driver information center will display "Tire Pressure Relearn," select "Yes," press the Set/Clr button, and the horn will sound twice to reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Usually, an alarm will trigger if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring light to illuminate. A simple tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.
14
5
Share

Do I still need to engage the electronic handbrake when in P gear?

Yes, it is necessary. The electronic handbrake is a technology that achieves parking braking through electronic control. For prolonged parking, the handbrake must be engaged; otherwise, it may damage the locking mechanism of the automatic transmission. Here is some relevant information about the electronic handbrake: 1. Principle: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. Function: The electronic handbrake has evolved from the basic parking function to include the automatic parking function AUTO-HOLD. The application of AUTO-HOLD automatic parking technology eliminates the need for drivers to maintain prolonged braking when the vehicle is stationary. When the automatic electronic parking brake is activated, it can prevent unnecessary sliding of the vehicle.
3
5
Share

How to Adjust the Seat?

Adjusting the seat involves the following steps: 1. Adjust the distance between the seat and pedals: The driver's legs should remain slightly bent when fully depressing the pedals, ensuring comfortable pedal control. 2. Adjust the distance between the steering wheel and the driver: Extend your arms straight to rest on the top of the steering wheel, with your wrists naturally touching the wheel's edge. 3. Adjust hand positioning on the steering wheel: Place your left hand at the 9 o'clock position and your right hand at the 3 o'clock position. Keep your thumbs on the outer edge of the wheel without hooking them inward, to maintain steering flexibility and prevent finger injuries during emergency maneuvers.
6
0
Share

What are the differences between the Audi A6 Dynamic and Elegance models?

Audi A6L Dynamic and Elegance models differ mainly in three aspects: body length, curb weight, and exterior configurations: Body length: The Audi A6L Elegance model has a body length of 5038mm, while the Dynamic model measures 5050mm. Curb weight: The Audi A6L Elegance model weighs 1810kg, whereas the Dynamic model weighs 1830kg. Exterior configurations: Compared to the Elegance model, the Dynamic model features a sport appearance package. Apart from these three differences, all other aspects of the Audi A6L Dynamic and Elegance models are identical. In terms of power, both are equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 224Ps, maximum power of 165KW at 5000-6000rpm, and maximum torque of 350NM at 1600-4500rpm. In terms of configurations, both models come standard with 360-degree panoramic imaging, cruise control, engine start-stop technology, automatic parking function, hill-start assist, and more. The interior includes a multifunctional steering wheel, a trip computer display screen, and a 12.3-inch full LCD instrument panel.
12
1
Share

What Causes Cracks on the Sidewall of Car Tires?

The reasons for cracks on the sidewall of car tires are: 1. Natural aging of the tire; 2. Impact damage to the tire. Precautions for using car tires include: 1. When inflating tires, reduce the tire temperature to normal levels to avoid affecting pressure judgment; 2. Inflate to around 2.5bar; 3. Regularly check the wear level of car tires; 4. Avoid exposing tires to high temperatures. The extent to which tire cracks require replacement is: 1. Cracks appear on the tire sidewall; 2. Cracks are too long or deep, reaching the standard tread depth of 1.6mm; 3. Tire bulging occurs; 4. Wavy cracks on the tire surface; 5. Obvious scratches or punctures on the tire surface.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.