How much fuel does the rear blower resistor of Baojun 730 consume?

How Long Does a Full Tank of Gas Last for a Motorcycle?

A full tank of gas for a motorcycle typically allows it to travel around 100 to 200 kilometers. There are many types of motorcycles, and different engine displacements and models have varying fuel consumption rates. Additionally, the fuel tank capacity differs among models, so the distance a full tank can cover varies depending on the motorcycle. Methods to Determine Fuel Consumption: You can estimate fuel consumption using the motorcycle's dashboard. Here, F=full represents a full tank, and E=empty indicates an empty tank. When the fuel warning light turns on, note the odometer reading and record the amount of fuel added. When the tank is empty again, record the odometer reading once more. Subtract the initial odometer reading from the current one, then divide by the amount of fuel consumed to calculate the fuel efficiency. Factors Affecting Fuel Consumption: Engine displacement is somewhat related to fuel consumption, but higher fuel consumption doesn't always mean a larger displacement. Relatively speaking, a vehicle's engine size does not directly correlate with fuel efficiency in a proportional manner. Besides engine size, factors such as the vehicle's aerodynamics, weight, and engine technology also significantly impact fuel consumption. Among motorcycles with the same displacement, those with more advanced engine technology tend to be more fuel-efficient.

4

2

Share

What are the differences between China 6 and China 5?

The differences between China 5 and China 6 emission standards are as follows: Different emission standards: The China 6 emission standard is more than 30% stricter than China 5. Excluding the influence of driving conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China 5 standard was implemented nationwide on January 1, 2017, as the fifth stage of national motor vehicle emission standards. China 6 was implemented on July 1, 2019. Different principles: During the China 5 stage, diesel and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same. Different issuing departments: The China 5 standard was issued by the Ministry of Environmental Protection, while the China 6 standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China 5 is represented by the letter V, while China 6 is represented by VI. Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China 5, China 6 has improved monitoring requirements for plug-in hybrid electric vehicles, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulatory aspects. The China 5 standard limits are as follows: Gasoline vehicles must not emit more than 1,000 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM (particulate matter) per kilometer driven. China 6 has two standards: China 6a and China 6b, as follows: China 6a standard limits: Gasoline vehicles must not emit more than 700 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM (particulate matter) per kilometer driven. China 6b standard limits: Gasoline vehicles must not emit more than 500 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 mg of PM (particulate matter) per kilometer driven. Affected by the China 6 emission policy, although China 5 vehicles are not currently restricted in normal use (no driving bans or license plate restrictions), their resale value will be significantly impacted. For truck owners, if they purchase a truck on loan for cargo transport, the depreciation of the vehicle after paying off the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China 6 vehicles, which have a longer service life and more road rights, offer greater advantages.

11

5

Share

What is the legal basis for the three-document consistency requirement when refueling motorcycles?

There is no legal basis for the three-document consistency requirement when refueling motorcycles; it is a regulation established based on the "Fire Protection Design Code for Automobile Gasoline and Gas Filling Stations". Three documents required for motorcycle refueling: To refuel a motorcycle, the rider must present a driver's license, ID card, and vehicle registration certificate, and the motorcycle must be licensed. This is primarily to combat the illegal operation of unlicensed and unregistered vehicles on the road. Regulations for refueling at gas stations: First, open flames are strictly prohibited within the gas station, and all hazardous materials are forbidden. Repairing vehicles, striking metal objects, or any other activities that may generate sparks are strictly prohibited inside the station. When a motorcycle enters the station for refueling, the gas station should assign a designated staff member to guide the motorcycle to the designated refueling area. The rider must not remain seated on the motorcycle during refueling. All motor vehicles must be turned off while refueling. Motorcycles, light motorcycles, and tractors must be turned off before entering the station and must not be started within the station.

3

4

Share

Is the Trunk Safe?

The safety of a car's trunk is relatively good, but it's best not to store valuable items inside. Precautions for placing items in the trunk: Do not overload the trunk with heavy items, as this not only increases the vehicle's burden but also raises engine consumption. Over time, it may also pose safety hazards. Avoid placing items that are prone to corrosion or spoilage, as this situation often occurs. Do not store flammable or explosive materials; such items must be transported by specialized vehicles, and private cars should never transport them without authorization. Methods to open the trunk: Press and hold the trunk unlock button on the remote key, and the trunk will open automatically. Some models may only pop open slightly, requiring manual lifting. There is also a trunk-opening switch in the driver's compartment with an icon indicating the trunk; activating this switch will open the trunk.

5

1

Share

Why Does the Motorcycle Stall When Shifting Gears?

Motorcycle stalling when shifting gears can be caused by improper clutch adjustment, high oil viscosity, excessive component wear, etc. Improper clutch adjustment: Incomplete clutch disengagement. It is necessary to adjust the spacing of the clutch cable. The free travel of the clutch handle should be between 1-3 millimeters. If the stalling issue persists after adjustment, check if there is an internal clutch malfunction. High oil viscosity: If the motorcycle hasn't been started for a long time, the clutch pressure plate and friction disc may stick together, leading to poor separation. Consider switching to winter-grade oil or try starting in 5th gear before shifting to 1st gear. Component wear: Wear on the clutch friction disc and pressure plate sliding grooves. Repair the worn grooves on the clutch housing and main shaft to resolve the issue.

16

0

Share

How many people can a car carry?

An ordinary car is approved to seat five people, including the driver. As long as the number of passengers does not exceed the approved capacity, it is acceptable. Each car model has different passenger capacities, so the specific number should be checked on the vehicle's documentation. Penalties for overloading a car: Driving other passenger vehicles with more than 20% over the approved number of passengers results in a deduction of 6 points. Driving passenger vehicles (excluding buses and school buses) with more than the approved number of passengers but less than 20% over results in a deduction of 3 points. Most private cars have a passenger limit of only 5 people, so carrying even one extra person means exceeding the limit by 20%, making it easy to incur heavy penalties. Exceeding 20% results in a 6-point deduction and a fine. Consequences of overloading: Overloading increases the vehicle's mass and inertia, lengthening braking distances and increasing danger. Severe overloading can lead to tire blowouts, sudden swerving, brake failure, or rollover accidents due to excessive tire load and deformation. Additionally, overloading affects the vehicle's steering performance, increasing the risk of accidents due to loss of control.

6

1

Share

How much fuel does the rear blower resistor of Baojun 730 consume?

How Long Does a Full Tank of Gas Last for a Motorcycle?

What are the differences between China 6 and China 5?

What is the legal basis for the three-document consistency requirement when refueling motorcycles?

Is the Trunk Safe?

Why Does the Motorcycle Stall When Shifting Gears?

How many people can a car carry?

Does Installing an Engine Guard Plate Affect Insurance Claims?

Where to Add Engine Oil for Motorcycles?

What are the advantages of Sundiro Honda's dual-displacement engine?

Does a car need to warm up before starting?