How much fuel does a FAW J6 consume per hour at idle?

3 Answers
OAva
07/29/25 7:32am
FAW J6 consumes 2-3 liters of fuel per hour at idle. Here are detailed explanations about vehicle fuel consumption per 100 kilometers: 1. Overview: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is obtained by manufacturers in an objective environment, where they use a dynamometer installed on the vehicle chassis to measure values, convert them into speed parameters, and then calculate the theoretical experimental fuel consumption data per 100 kilometers for the model at specified speeds. 2. Others: Since most vehicles approach their economical speed at 90 km/h, most publicly announced theoretical fuel consumption figures are usually the fuel consumption per 100 kilometers at 90 km/h.
Was this review help?
9
5
Share
DeChristopher
08/13/25 1:16am
I've been driving a FAW J6 heavy-duty truck for over a decade, often encountering idling situations during long-haul shipments. Generally speaking, idling for one hour consumes approximately 1.8 to 2.5 liters of diesel fuel – this is based on actual records. Once when stuck in highway traffic with one hour of idling, my fuel tank showed nearly 2 liters consumed, costing me over ten yuan. Cold weather or using air conditioning increases fuel consumption significantly, sometimes exceeding 3 liters. I recommend reducing idling time, especially when parked waiting for cargo. Consider using external heaters or turning off the engine to rest instead – this saves fuel, benefits the engine, and prevents carbon buildup issues. Prolonged idling not only burns money but also reduces engine lifespan. Fleet drivers all agree it's a bad habit.
Was this review help?
17
2
Share
Expand All
JaxsonLee
10/04/25 7:41am
As a guy who's been repairing trucks for years, I can help estimate the idling fuel consumption of the FAW J6. Normally, it consumes around 1.5 to 2 liters per hour at idle, but this depends on the engine model and condition - older diesel engines might go up to 2.5 liters. Checking fuel consumption is simple: fill up the tank, idle for an hour, then refill and calculate the difference. If you notice higher consumption, say over 2.5 liters, it could be due to clogged fuel injectors or a dirty air filter, indicating maintenance is needed. At idle, the engine runs slowly with minimal fuel use, but it adds up over time. It's best not to exceed 10 minutes of idling to avoid fuel waste and excessive emissions. Just measure it once yourself to be sure.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What is the method for replacing valve stem seals on BMW N13?

Replacing valve stem seals typically requires removing the engine cylinder head, supporting the valves, and then performing operations such as replacing the valve stem seals. Method for removing valve stem seals: Remove the camshaft and hydraulic lifters, storing them face down. Please note that during the operation, the lifters are not interchangeable. Use a spark plug wrench to remove the spark plugs, adjust the piston of the corresponding cylinder to top dead center, and screw the pressure hose into the spark plug thread hole. Install the spring compression tool onto the cylinder head using a bolt. Adjust the relevant valve to the correct position, lightly tap the valve spring retainer, and remove the valve lock. Use a tool to pull out the valve stem seal. Function of valve stem seals: Prevent engine oil from entering the exhaust pipe and intake pipe, leading to oil loss; prevent the mixing of gasoline and air; prevent engine oil from entering the combustion chamber; prevent exhaust gas leakage. Valve stem seals mainly consist of lock pieces, spring retainers, seals, inner and outer springs, valves, valve guides, valve seats, etc. They are generally made of materials with good heat resistance and oil resistance, with fluororubber being the primary material used.
17
2
Share

How to Quickly Remove Frost from Car Windows?

Methods for quickly removing frost from car windows are as follows: Built-in Defroster in the Car: First, turn on the air conditioning button inside the car and switch the air circulation mode to the external circulation mode. After a short while, the frost will disappear. However, this method has a drawback: turning on the air conditioning button in winter will inevitably increase fuel consumption, and switching to external circulation will cause the temperature inside the car to drop suddenly, making it unsuitable for long drives. Opening the Windows: The fastest and most effective emergency method is to roll down the windows. Letting the wind circulate inside and outside the car for a minute or two will naturally remove the frost. This method saves time and does not increase fuel consumption. Turning on the Heater: Simply turn on the heater inside the car and adjust the airflow direction to blow directly onto the windows. The heater will effectively dry the air inside the car, and once the air is dry, frost will not form on the windows. However, this method also has a drawback: when the car is first started in winter, the coolant temperature has not yet reached the normal level, so the air blown out at this time is not warm.
5
1
Share

Can I directly pull down from 1st gear to 2nd gear in Subject 3 driving test?

It is not advisable to directly pull down from 1st gear to 2nd gear in the Subject 3 driving test. Many operations must follow the correct steps, otherwise the system may fail to detect the action, leading to point deductions. Therefore, it is more appropriate to first shift to neutral before pulling down to 2nd gear when changing from 1st to 2nd gear in Subject 3. Even if directly pulling down from 1st to 2nd gear is allowed in Subject 3, it is still not recommended. This method carries the risk of failing to engage the gear or engaging the wrong gear. Following the proper steps—fully depressing the clutch, shifting to neutral, and then shifting to 2nd gear—ensures higher accuracy and safety. During gear shifting operations in Subject 3, after shifting to neutral, pause for 0.5-1 second before shifting to another gear. There is no specific requirement for the duration of staying in each gear during gear shifting. Upon hearing the gear shift command, complete the shift within 5 seconds. The reason for pausing 0.5-1 second is mainly to prevent the system from failing to detect the shift due to excessive speed, which could result in point deductions for not following the correct procedure.
6
1
Share

What is the fuel tank capacity of the 2013 Peugeot 508 in liters?

2013 Peugeot 508 has a fuel tank capacity of 70 liters, and it requires 92-octane or higher unleaded gasoline. It is a mid-size car under Dongfeng Peugeot. Among similar models, the Volkswagen Magotan has a fuel tank capacity of 66 liters, and the Buick Regal has a fuel tank capacity of 60 liters. If the owner wants to check the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, ensure that the ventilation holes are clear. The filter screen at the fuel filler inlet should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out during driving.
8
1
Share

At What Age Can You Obtain a Driver's License?

You can obtain a driver's license if you are between 18 and 70 years old. However, since there are various types of driver's licenses, the age requirements may differ accordingly. A driver's license is a legal document issued by the relevant authorities to individuals who have legally learned to drive motor vehicles, mastered traffic regulations and driving skills, and passed the required examinations, permitting them to operate specific types of motor vehicles. According to Article 11 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' (Ministry of Public Security Order No. 71), the age requirements for applying for a motor vehicle driver's license are as follows: For small cars, small automatic transmission cars, and light motorcycles, applicants must be between 18 and 70 years old. For low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, applicants must be between 18 and 60 years old. For urban buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, applicants must be between 21 and 50 years old. For tractor-trailers, applicants must be between 24 and 50 years old. For large passenger vehicles, applicants must be between 26 and 50 years old.
7
2
Share

Is it necessary to continue practicing driving after failing the subject two test?

It is necessary to continue practicing driving after failing the subject two test. The main reasons for failing are mostly due to unfamiliarity with the driving test items or insufficient proficiency in vehicle operation. Therefore, during the test, any unexpected situation can lead to failure. Many candidates feel nervous during the test, some even to the point of shaking hands and feet. However, overall, most candidates lack confidence in their operation skills. If each driving test item is practiced to a very proficient level, there would be no lack of confidence in operation. Failing the subject two test is often due to unfamiliarity with the test items or insufficient operational proficiency, so practicing after failing is essential. Notes for the subject two test: Dress comfortably and prepare mentally before the test; pay attention to key points when reversing into the garage, avoiding turning left or right; when parking sideways, ensure the rear wheels exceed the edge line of the garage, adjust the distance properly, remember to turn on the signal light and honk. When making a sharp turn, quickly turn the steering wheel after identifying the correct position point; when driving on a curve, make wide turns after entering the curve, maintain a steady speed, and avoid crossing any lines. After the test, drive the car back to the starting position, confirm by signing, and then turn off the engine.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.