How much fuel can the Geely Emgrand GS hold?

1 Answers
EmmettDella
07/29/25 11:21pm
Geely Emgrand GS has two fuel tank capacities: 55 liters and 60 liters. Below are the details about the fuel tank capacity and an introduction to the Geely Emgrand GS: Introduction to the Geely Emgrand GS fuel tank capacity: The model equipped with a 1.8-liter naturally aspirated engine has a fuel tank capacity of 60 liters, while the models equipped with a 1.4-liter turbocharged engine and a 1.5-liter turbocharged engine both have a fuel tank capacity of 55 liters. Introduction to the Geely Emgrand GS: The Geely Emgrand GS is Geely's first crossover SUV, available in two exterior styles: the Elegance version and the Sport version. In terms of body dimensions, the Emgrand GS measures 4440mm in length, 1833mm in width, and 1560mm in height, with a wheelbase of 2700mm.
Was this review help?
18
4
Share
More Forum Discussions

What is the National Vehicle Emission Standard?

Currently, China implements the sixth-stage motor vehicle pollutant emission standards. Below is additional information: Introduction: To implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," prevent and control pollution, protect and improve the ecological environment, and safeguard human health, the "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (China VI)" has been approved as the national pollutant emission standard and jointly issued by our ministry and the General Administration of Quality Supervision, Inspection and Quarantine. Content Interpretation: To further strengthen motor vehicle pollution prevention and control, reduce emissions from the source, and fulfill the requirements of the "Thirteenth Five-Year Plan for National Economic and Social Development" regarding the "implementation of China VI emission standards and corresponding fuel standards," the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine introduced the China VI standard for light-duty vehicles.
3
4
Share

What are the reasons for the difficulty in starting a pull-start gasoline engine?

Hand-pull gasoline engine is difficult to start because of: 1. Insufficient engine oil in the gasoline engine; 2. Spark plug blockage. Methods for cleaning spark plugs include: 1. Using a spark plug cleaner; 2. Cleaning with carburetor cleaner; 3. Soaking in gasoline, kerosene, or acetone solvent, or boiling in alkaline water. Types of spark plugs include: 1. Standard spark plugs; 2. Insulator projected spark plugs; 3. Electrode-type spark plugs; 4. Seat-type spark plugs; 5. Pole-type spark plugs. The working principle of a spark plug is: Under the control of the engine, the high-voltage electricity generated by the ignition coil is introduced into the engine cylinder, generating a spark between the electrodes of the spark plug to ignite the mixed gas, enabling the engine to operate normally.
4
1
Share

How to Debug Tire Pressure Monitoring?

Tire pressure monitoring debugging method: 1. In the tire pressure state, long press the SET button to enter parameter settings; 2. Press the SET button five times consecutively to enter tire matching; 3. The left front wheel icon flashes, short press the ADJ button to cycle and select the tire position that needs to be matched. After selection, the corresponding tire symbol flashes. Then remove the external sensor of the corresponding tire and intermittently deflate the tire. Quickly reinstall the external sensor, and the sensor will transmit signals normally; 4. After the display receives the signal, it changes to the pressure value and emits a short beep as a prompt. At this time, short press the MENU button to confirm, release after hearing a beep, and the matching is successful; 5. Continue to short press the ADJ button and follow the above steps to match the next tire position. After the setup is complete, long press the MENU button for 3 seconds to save and exit. If no operation is performed in the tire matching state, it will automatically exit after 3 minutes.
19
0
Share

Can I Renew My Driver's License on Weekends?

Driver's license renewal cannot be processed on weekends. The reasons are as follows: 1. Theoretically: Normally, the vehicle management office operates year-round without breaks. 2. Practically: After the launch of the Traffic Management 12123 online platform, local offices adjust their window services according to statutory holidays based on online service availability. Points to note for driver's license renewal: 1. Failure to renew within one year after expiration will result in cancellation: If a driver's license is not renewed for more than one year after its expiration, or if drivers aged 60 and above fail to submit a physical condition certificate within one year after the end of a scoring cycle, the license will be canceled. 2. Required materials: "Physical Condition Certificate for Motor Vehicle Drivers", original and copy of ID card, three recent front-facing color photos with white background and no hat, and the currently used driver's license.
13
0
Share

How to Turn Off the Auto-Locking Feature on the Hongqi H7?

The method to turn off the auto-locking feature on the Hongqi H7 is as follows: 1. First, turn on the ignition to put the car in the 'on' position, but do not start the engine; 2. Hold down the lock button for about 10 seconds until you hear a beep sound inside the car or see the lights flash twice, indicating that the auto-locking feature has been successfully deactivated. The auto-locking feature is designed for anti-theft purposes, allowing the car to lock quickly after starting to prevent door-pulling robberies during traffic jams or at red lights. It provides a certain level of security and protects passengers, especially children, by preventing them from opening the door handles while the car is in motion. In terms of powertrain, the Hongqi HS5 is equipped with a 2.0T turbocharged engine, paired with a 6-speed automatic transmission. For the suspension system, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
12
1
Share

Does the Honda CR-V have a particulate filter?

Honda CR-V does not have a particulate filter. Here are the detailed introductions about the particulate filter: 1. Eliminating the particulate filter warning light: The illumination of the particulate filter warning light indicates that the particulate filter is clogged. For diesel models, there is a regeneration button on the central console. Pressing it will cause the vehicle to run at high RPM for a period of time, and after a short wait, the particulate filter will be automatically cleaned. For gasoline vehicles, you can appropriately increase the RPM while driving or use highway driving to raise the exhaust temperature, burning off the particulates inside the filter, thereby eliminating the warning light. 2. Effects of removing the particulate filter: All China VI gasoline vehicles are equipped with a particulate filter. Removing it will result in failing the annual emission test. Although the particulate filter may slightly reduce the vehicle's power output, the overall impact is not significant. For diesel vehicles, the particulate filter cannot be removed either, as it plays a crucial role in controlling emissions.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.