How much fuel can the BYD F3 fuel tank hold?

1 Answers
CoraLee
07/29/25 8:55pm
The fuel tank capacity of the BYD F3 is 50 liters. Here are the related details: Handling: Overall handling is relatively poor. The steering wheel has moderate weight, but some users report slight deviation issues. The throttle response is sensitive, but the chassis is light and the suspension is stiff, resulting in significant bumpiness when driving over speed bumps or uneven roads. Some users also report inaccurate fuel gauge readings. Performance: The overall power is good. Acceleration from standstill is average, but overtaking acceleration is quick. Users mention ample power at high speeds, but the car tends to feel unstable at high speeds. Gear shifts are clear and generally smooth, though some users report stiffness in certain gears. Fuel Efficiency: Fuel consumption performance is outstanding. Based on feedback from most users, the average fuel consumption is between 7-8L per 100 kilometers.
Was this review help?
20
0
Share
More Forum Discussions

Can Temporary License Plates Use ETC Lanes?

As long as you have an ETC device installed, you can use ETC lanes. The ETC system automatically charges by recognizing the vehicle's ETC electronic tag, deducting the balance from the tag. This process is largely unrelated to whether the vehicle is using temporary license plates. ETC Charging Principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's electronic tag (installed on the windshield) and the ETC lane's microwave antenna, the system connects with banking networks for backend settlement. This allows vehicles to pass through toll stations without stopping, following a "pass first, charge later" principle. Benefits of Installing ETC: Time-saving: Eliminates waiting in queues; Eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll booths; Cost-efficient: Minimizes vehicle wear and fuel consumption by reducing frequent starts and stops; Improved efficiency: ETC lanes can theoretically process vehicles 2-3 times faster than traditional methods, making them more advanced and efficient. Compared to license plate payment, ETC technology is more mature and advantageous. Additional Policy Support: The State Council's "13th Five-Year Plan for Modern Integrated Transportation System Development" explicitly states goals to achieve widespread ETC adoption by 2020, including 50% usage rate for road passenger vehicles. Future Possibilities: Beyond increasing ETC convenience and passenger vehicle usage, future plans include expanding ETC to trucks and integrating ETC systems with smart transportation technologies like vehicle-to-vehicle communication and vehicle-road coordination, offering comprehensive travel services and more application scenarios. ETC Usage Notes: ETC has an 8-meter sensing range. To avoid incorrect charges for the vehicle ahead (due to ETC device failure or absence), maintain a 10-meter distance. The ETC lane recognizes vehicles at speeds up to 20km/h. Exceeding this speed may result in failed charges. Tampering with or moving the OBU device, or having a loose/detached ETC tag, can deactivate it. Visit the issuing bank or highway office for reactivation if not caused intentionally. Insufficient balance on debit-linked ETC cards may cause charge failures. Follow staff directions to use manual MTC lanes with cash or card payments. Thick or modified windshields, especially post-accident replacements, may interfere with ETC signal reception.
10
4
Share

How to Reduce Noise in Wuling Hongguang S?

You can install some high-quality sound-absorbing foam materials under the engine hood, which can not only suppress vibrations caused by the hood but also absorb a significant amount of noise. Here is some relevant information about the Wuling Hongguang S. 1. Exterior: The Wuling Hongguang S has created a new niche in the commercial vehicle market, which is crowded with larger models, thanks to its two engine options (1.2L and 1.5L), clever design, refined interior, powerful cross-class performance, and an absolutely attractive price range of 49,800 to 58,800 yuan. "Compact, refined, and practical" is the unanimous evaluation of industry experts for the Wuling Hongguang S. 2. Interior: The interior is well-crafted and offers flexible space. Like many European and American luxury commercial vehicles, the Wuling Hongguang S adopts a car-like design style for its interior. The dashboard is simple and clear, and the control panel is ergonomically laid out with all functions within easy reach. As an economical vehicle, the Wuling Hongguang S achieves a remarkably high standard in interior craftsmanship. Whether it's the assembly quality of interior components or the texture of the materials used, it stands out among domestic vehicles.
7
5
Share

What Causes Car Shaking During Acceleration?

Car shaking during acceleration can be attributed to the following specific reasons: 1. Severe engine carbon deposits: The most common cause of car shaking is excessive carbon buildup in the throttle body or fuel injectors. When there is too much carbon inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, leading to a lean air-fuel mixture during cold starts and making it difficult to start the engine. In this situation, the car can only start easily once the carbon deposits have absorbed enough gasoline. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the combustion chamber by the engine's vacuum, enriching the air-fuel mixture. This fluctuation between lean and rich mixtures causes shaking during acceleration after a cold start. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark plug firing can also lead to car shaking during acceleration. 3. Aging engine components: Car shaking can also be related to the aging of engine mounts (also known as engine mounts or rubber mounts). Engine mounts act as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and the cabin, causing shaking during acceleration.
17
1
Share

What are the faults causing poor engine acceleration?

Here are the faults causing poor engine acceleration: 1. Ignition: Incorrect ignition timing. 2. Fuel: Low fuel pressure. 3. Intake system: Air leakage in the intake system. 4. Throttle: Malfunction of the throttle position sensor or air flow meter. 5. Fuel injector: Poor performance of the fuel injector. 6. Exhaust gas recirculation: Abnormal operation of the exhaust gas recirculation system. 7. Signal: Weak ignition signal. Below is extended information on inspections to perform when poor engine acceleration occurs: 1. Air filter: Check if the air filter is clogged, and clean or replace it in time. 2. Throttle: Inspect the throttle position sensor. 3. Intake system: Check for air leaks in the intake system. 4. Fault diagnosis: Perform self-diagnosis to check for any fault codes.
1
0
Share

Can a tire with exposed cords still be used?

Tires with exposed cords inside should not continue to be used. Below are specific details about when to replace car tires: 1. Replacement timing depends on conditions: For drivers with good driving habits, tires generally need replacement every 3-5 years or after traveling 60,000-80,000 kilometers. If driving conditions are harsh, such as frequent travel on gravel roads or in heavy traffic with sudden braking and sharp turns, the replacement interval will be shorter. 2. Tire aging period: The main material of tires is rubber, which naturally ages over time. Signs of aging include hardening of the rubber and small cracks appearing on the tire sidewalls. The natural aging period is typically 4-5 years. Tires should be replaced after 5 years of use to prevent the risk of blowouts. 3. Observe tire wear: If tire wear is severe, and the tread pattern is level with the wear indicators, the tires should be replaced. Otherwise, braking on wet roads will be more difficult, and the vehicle may easily lose control. Driving on very rough roads with worn tires also increases the risk of blowouts.
5
5
Share

How to Restart the Mercedes-Benz Center Control Screen?

To restart the Mercedes-Benz center control panel, press the power button symbol on the center control panel. Here are the reasons for the black screen on the center control panel: 1. Defects in the center control system: Due to incompatibility between the Bluetooth of some brands and models of mobile phones, third-party software, and the host software, the center control screen may turn black when connecting or playing songs. In this case, the center control system usually returns to normal after a restart. 2. USB port in the central armrest: According to feedback from many C-Class users, inserting anything into the USB port in the central armrest can cause the screen to turn black.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.