How much fuel can a Changan Oshan X7 tank hold?

How to reset the maintenance light on the Citroën C3-XR?

Methods to reset the maintenance light on the Citroën C3-XR: 1. There are three small buttons below the instrument panel; press and hold all three simultaneously for about 10 seconds to complete the maintenance light reset. 2. Operate through the multifunction steering wheel switch or the end switch of the wiper handle, and follow the instrument program to display the menu, settings, maintenance interval, and reset. 3. If a professional diagnostic tool is required for resetting, it can only be done at an authorized 4S dealership. The front design of the Citroën C3-XR is more aesthetically pleasing than the rear, with minimal lines creating a highly layered appearance for the front fascia. The top trim features two rows of LED daytime running lights, further enhancing the vehicle's premium feel, while the rear maintains the signature Citroën family design. The high-end model of the Citroën C3-XR comes equipped with a panoramic sunroof, which provides excellent natural lighting inside the cabin.

8

5

Share

Why does the Cruze idle shake but stops shaking when accelerating?

There are many reasons for this phenomenon, such as severe carbon buildup inside the engine, ignition system issues, unstable fuel pressure, aging of internal engine components, etc. Below are the specific reasons: 1. Severe carbon buildup inside the engine: Often manifested as carbon buildup on the throttle valve, fuel injectors, spark plugs, and pistons. When this carbon buildup accumulates to a certain extent, it absorbs combustion heat and may even cause detonation or knocking. If the fuel injectors become clogged, it can lead to poor atomization, resulting in dripping and smoke, which not only increases fuel consumption but also pollutes the environment. 2. Ignition system issues: Generally caused by excessive carbon buildup on spark plugs or insufficient ignition voltage, leading to misfiring. This can result in single or multiple cylinders misfiring, causing the engine to lose power and shake. Severe shaking may cause the engine to hover between stalling and running. 3. Unstable fuel pressure: The fuel system includes components such as the fuel tank, fuel filter, fuel pump, oil-gas separator, fuel lines, and fuel gauge. If any of these components malfunction, become clogged, or leak, it can lead to unstable fuel pressure. The engine may experience intermittent power loss and shaking. Accelerating may temporarily increase fuel pressure and stop the shaking, but the underlying issue remains unresolved when not accelerating.

11

2

Share

What are the dimensions of the Nissan Qashqai?

Nissan Qashqai has body dimensions of 4401mm in length, 1837mm in width, and 1611mm in height, with a wheelbase of 2646mm. Methods for measuring car dimensions: The definition of car body length is the distance between the two extreme points in the length direction of the car, measured from the most protruding point of the front bumper to the most protruding point of the rear bumper. The definition of car body width is the distance between the two extreme points in the width direction of the car, which is the distance between the leftmost and rightmost protruding points. The definition of car height is the distance from the ground to the highest point of the car. The highest point refers to the tallest position on the car's roof, excluding the length of the roof antenna. Powertrain of the Nissan Qashqai: The Nissan Qashqai is equipped with a new MR20DD naturally aspirated direct-injection engine and a simulated 7-speed CVT transmission. The main technological advancements include the addition of direct injection and TwinVTC technology. The MR20DD engine with direct injection technology increases the fuel supply pressure from the traditional low pressure (about 5Bar) to over 100Bar through a high-pressure pump.

6

0

Share

Will the Subject 3 Result Be Canceled If Subject 4 Is Not Passed?

Normally, if you fail Subject 4, your Subject 3 result will not be canceled. However, if you fail five times, all previous results will become invalid, and you will need to retake the exams. Article 32 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' states that for first-time applicants or those applying to add a permitted vehicle type, after passing Subject 1, the vehicle management office should issue a driving skill test permit within one day. The driving skill test permit is valid for three years, and the applicant must complete Subjects 2 and 3 within this period. If the exams are not completed within the specified time, all previous results will be invalidated. Generally, obtaining a driver's license involves four subjects, commonly referred to as Subject 1, Subject 2, Subject 3, and Subject 4. Subjects 1 and 4 are theoretical exams, while Subjects 2 and 3 are practical road tests that require driving on the road. These can be quite challenging for beginners and often take more time. If you fail the exams for Subjects 2 and 3 five times during the learning process, all previously passed exams will be invalidated, and you will need to re-enroll and start over.

14

4

Share

What Causes the Exhaust Controller Malfunction Light to Illuminate?

The reasons for the exhaust controller malfunction light to illuminate are: code fault, intake pressure sensor failure, and oxygen sensor failure. Code fault: A fault code is reported, but the system operates normally. This may be due to an operation exceeding the computer's control range, resulting in a feedback fault code that can be cleared initially. Solution: When a fault occurs in the car engine, the computer detects it and displays a fault code. Using this code, maintenance personnel can accurately locate the faulty component and proceed with repairs. Intake pressure sensor failure: Based on computer detection information and further inspections, a certain fault is identified that does not significantly affect normal driving or has minimal impact, indicating an intake pressure sensor failure that requires timely detection and resolution. Solution: Disconnect the intake manifold pressure sensor's wiring harness plug, then turn on the ignition switch without starting the engine. Use a voltmeter to measure the voltage between the power terminal and the ground terminal on the wiring harness plug. The value should comply with specifications; otherwise, further inspection is needed to ensure the circuit between the intake manifold pressure sensor and the electronic control unit is conducting. If there is a break, replace or repair the electronic control circuit wiring harness. Oxygen sensor failure: Severe impact on the engine's normal operation is felt during driving, indicating an oxygen sensor issue that requires immediate repair. Solution: Pay attention to fuel quality, check if the spark plugs and ignition coil's operating voltage is normal, and ensure the three-way catalytic converter is functioning properly without any blockages.

7

4

Share

Are There Lockers for the Subject 1 Exam?

There are lockers available for the Subject 1 exam. During the exam, items such as mobile phones cannot be brought into the exam area and can be stored in the lockers. For the Subject 1 exam, you need to bring your ID card. Please note that an expired ID card cannot be used. Exam Procedure: Follow the instructions of the staff and collect your driving school file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the exam area; No loud noises are allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in your bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam area; Candidates who pass the exam should sign under the guidance of the staff at the exam exit before leaving; Candidates who fail the exam can leave immediately and wait for notification from their driving school regarding the retake schedule. The Subject 1 exam is conducted on a computer, consisting of 100 questions with a total duration of 45 minutes. The question types include true/false and multiple-choice questions. Content of the Subject 1 Exam: The exam covers basic driving theory, road safety laws and regulations, traffic signals, rules of the road, and other fundamental knowledge, plus local regulations. The scheduling of the driver's theory exam is determined by the local vehicle management office.

15

0

Share

How much fuel can a Changan Oshan X7 tank hold?

How to reset the maintenance light on the Citroën C3-XR?

Why does the Cruze idle shake but stops shaking when accelerating?

What are the dimensions of the Nissan Qashqai?

Will the Subject 3 Result Be Canceled If Subject 4 Is Not Passed?

What Causes the Exhaust Controller Malfunction Light to Illuminate?

Are There Lockers for the Subject 1 Exam?

What Causes the Exhaust Pipe Bracket Rattle in a Corolla?

Should the Fabia use 5W40 or 5W30 engine oil?

Must Subject 4 Be Taken Within 10 Days After Passing Subject 3?

Is the Volkswagen DSG Transmission Software Upgrade Effective?