How much engine oil should be added to the Nissan Sylphy Classic?

1 Answers
LeoLee
07/30/25 4:29am
For the Nissan Sylphy Classic with a 1.6L engine, approximately 3L of engine oil is generally required, while the 1.8L engine model typically needs around 4L. During an oil change, it's impossible to completely drain all the old oil. For instance, in a 1.6L engine, adding about 2.8L will usually bring the oil level close to the upper limit. However, the exact amount of oil to be added should be between the upper and lower marks on the dipstick, as this range represents the optimal oil level. The Nissan Sylphy Classic has dimensions of 4665mm in length, 1700mm in width, and 1505mm in height, with a wheelbase of 2700mm. The 1.6L naturally aspirated engine delivers a maximum power of 93kW at 6000 rpm and a maximum torque of 154Nm, while the 1.8L naturally aspirated engine produces a maximum power of 102kW at 6000 rpm and a maximum torque of 174Nm.
Was this review help?
8
1
Share
More Forum Discussions

Can the Torsion Beam Break?

Torsion beams do not break. Working Principle of Torsion Beam: The working principle involves mounting the wheels of a non-independent suspension at both ends of a torsion beam. When one wheel moves up and down, it causes the torsion beam to pivot around the two red lines, thereby making the other wheel move accordingly. This reduces the tilting or swaying of the entire vehicle body. Applications of Torsion Beam: Vehicles equipped with this suspension system generally offer moderate stability and comfort. However, due to its simple construction and high load-bearing capacity, this suspension is commonly used in trucks, ordinary buses, small cars, and some other special vehicles.
2
4
Share

Why does the motorcycle clutch not engage after replacing the clutch plates?

If the motorcycle does not move after replacing the clutch plates, it is likely due to improper installation of the clutch plates or clutch springs, causing the clutch plates to fail to engage properly and remain in a slipping state. Consequences of incomplete clutch disengagement: Incomplete clutch disengagement can lead to difficulty in shifting gears, accelerated wear of transmission gears, unstable starts, and engine stalling during braking. These issues arise because the clutch cannot effectively cut off the engine's power. Solutions for incomplete clutch disengagement: To address this issue, primarily check whether the free play of the clutch lever is excessive and adjust it if necessary. Inspect the wear condition of the clutch friction plates and whether the adjustment bolts are loose, as these factors can increase the free play of the clutch lever. This results in the actual operating travel on the clutch being less than the distance required for complete disengagement, leading to incomplete clutch separation.
1
0
Share

Do Tanks Have Horns?

Tanks do not have horns. Introduction to Tanks: Tanks are one of the primary weapons in modern land warfare. They are tracked armored combat vehicles with direct-fire capabilities, off-road mobility, and armored protection. They hold a unique position in land-based weaponry, being the only type more crucial than wheeled armored vehicles. Tanks are primarily used to engage enemy tanks or other armored vehicles, suppress and eliminate anti-tank weapons, destroy fortifications, and annihilate enemy ground forces. Typically, tanks are equipped with several anti-aircraft (AA) or coaxial machine guns and a medium or large-caliber cannon (some modern tanks can even fire anti-tank/anti-aircraft missiles), embodying the classic concept of firepower-based combat. Tank Components: Most tanks feature a rotating turret, though a few have fixed main guns. A tank mainly consists of weapon systems, targeting systems, power systems, communication systems, armored hulls, and other components.
1
4
Share

Where is the transmission oil filler hole for Fengguang 580?

The transmission oil filler hole for Fengguang 580 is located under the black cap on top of the transmission. More information about Fengguang 580 is as follows: 1. Dongfeng Fengguang 580 is an SUV under the Dongfeng Fengguang brand, with a wheelbase of 2780mm and a body length of 4690mm, offering flexible space configurations with 5-seat and 7-seat options to meet diverse travel needs. 2. The Dongfeng Fengguang 580 features a 2+3+2 seating layout and comes equipped with front side airbags, tire pressure monitoring, traction control, electronic stability control, hill start assist, and other configurations.
6
4
Share

What size tires fit 16-inch rims?

16-inch rims are compatible with tires ranging from 185 to 275mm. Tires are circular elastic rubber products mounted on metal rims, designed to roll on the ground for various vehicles or machinery. They support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance. The functions of tires include: 1. Supporting the entire weight of the vehicle, bearing the load, and transmitting forces and torques. 2. Working with the vehicle suspension to cushion impacts during driving and dampen resulting vibrations. 3. Protecting vehicle components from severe vibrations and premature damage, adapting to high-speed performance, and reducing driving noise. 4. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface, and improving the vehicle's power, braking, and off-road capabilities.
2
0
Share

Can I use first gear for turning in Subject Three?

You can use first gear for turning in Subject Three, but first gear can only be used for a maximum of 50 meters. Introduction to Subject Three: Subject Three, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. Requirements for Subject Three: First gear can only be used for 50 meters before shifting is required, while second gear can be used for 200 meters before shifting. It is recommended to use second gear for turning. Typically, turning vehicles are required to merge into the driving lane, as merging directly into the driving lane eliminates the need for a lane change maneuver. For left turns, which are wide turns, the vehicle should not steer sharply immediately after crossing the stop line.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.