How much engine oil should be added to the Crown 2.0t?

1 Answers
Carole
07/30/25 3:33am
The Crown 2.0t requires 4.3 liters of engine oil. Engine oil, also known as engine lubricant, plays multiple roles including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the 'blood' of a car. The Crown is a mid-to-large-sized car brand under the Toyota Group, equipped with the Dual VVTi intelligent variable timing system for both intake and exhaust valves. In terms of the chassis, the Crown features a four-wheel independent suspension. Regarding body dimensions, it measures 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm.
Was this review help?
13
3
Share
More Forum Discussions

What are the causes and solutions for universal joint failures?

Universal joint failure causes and solutions: 1. Loose connecting bolts in precision universal joints - this requires tightening the components. 2. Worn or loose transmission output shaft splines - this requires correction, repair, or replacement. 3. Worn or loose spline grooves on the drive shaft and drive shaft yoke - this requires replacement with new parts. The following introduces the classification of universal joints: 1. Non-constant velocity universal joint: When the angle between the two connected shafts is greater than zero, this joint transmits motion with a varying instantaneous angular velocity ratio between output and input shafts, but maintains equal average angular velocity. 2. Quasi-constant velocity universal joint: Transmits motion with equal instantaneous angular velocity at designed angles, and approximately equal instantaneous angular velocity at other angles. 3. Constant velocity universal joint: Maintains equal instantaneous angular velocity between connected output and input shafts at all times. 4. Flexible universal joint: Exhibits significant elasticity in the torsional direction.
6
5
Share

Which is more fuel-efficient, the Arrizo 5 or the Vision?

Arrizo 5 is more fuel-efficient than the Vision. Here are the specific details about the Arrizo 5 and the Vision: 1. Fuel consumption: The Vision consumes 6.3L per 100km, while the manual version of the Arrizo 5 consumes 5.7L per 100km, and the automatic version consumes 6.2L per 100km. 2. Interior: The Vision's interior follows the previous-generation Geely style, with a silver brushed panel on the center console enhancing the cabin's texture. The Arrizo's interior breaks away from the dullness of the pre-facelift version, featuring better materials. 3. Exterior: The Vision's front fascia features the brand's unique water ripple grille, complemented by chrome accents, giving it a clean overall design. The Arrizo 5 incorporates a more conservative design, with a rounded overall shape and rear styling that ensures coherence and smoothness at a standard level.
6
1
Share

What is the weight of the Sagitar car?

The curb weight of the Sagitar is 1410 kg. Below are the specific details about the Sagitar: Vehicle Positioning: The Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen, classified as a compact car by Volkswagen. Configuration Features: All models come standard with integrated LED headlights for high and low beams. Higher trim levels feature a grille ambient light design, along with MDFS intelligent dynamic headlight assist system and AFS headlight dynamic cornering system. Interior Features: The cabin combines soft-touch materials with piano black lacquer panels. Higher trims are equipped with a 10.2-inch Active-Info-Display instrument cluster and an 8-inch multimedia screen angled toward the driver, supporting Apple Carplay connectivity. Base models lack the multimedia screen and use touch-sensitive controls for the air conditioning panel. Mid and lower trims feature traditional analog instrument clusters.
12
2
Share

What are the effects of a high clutch?

The effects of a high clutch: 1. It is prone to cause clutch slippage, especially noticeable on bumpy roads and when driving heavy vehicles uphill; 2. It makes operation more tiring, leading to excessive foot lifting which can cause left foot soreness. The effects of a low clutch: 1. Incomplete clutch disengagement—the clutch pedal must be fully depressed when shifting gears, otherwise, it will cause noise from the gearbox and accelerate wear on the gearbox gears; 2. During frequent gear shifting, slight carelessness can result in noise, affecting driving. The clutch is located within the flywheel housing between the engine and the gearbox. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the gearbox. While driving, the driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the gearbox, thereby cutting off or transmitting the power from the engine to the gearbox.
13
4
Share

What is the reason for the ticking sound in the BMW 320li engine?

The reasons for the ticking sound in the BMW 320li engine are: 1. It may be the sound of the engine valves due to excessive wear of the valve components; 2. It may be insufficient oil pump pressure; 3. The issue of oil viscosity, as oil becomes thicker in winter and harder to flow. The BMW 320li is a mid-size sedan under BMW Brilliance, featuring a 4-door, 5-seat sedan body structure with a fuel tank capacity of 59 liters. In terms of power, the BMW 320li is equipped with a 2.0L inline 4-cylinder turbocharged engine, with an aluminum alloy engine block, delivering a maximum power of 115kW and a maximum torque of 250Nm, paired with an 8-speed automatic manual transmission.
20
5
Share

What is the fuel consumption of the BJ80?

BJ80's fuel consumption varies depending on the model. Taking the Beijing BJ80 2019 2.3T Automatic Shengshi Huazhang Edition as an example, its official combined fuel consumption is 11.2 liters per 100 kilometers. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to derive the theoretical experimental fuel consumption data for the model. In terms of power, the Beijing BJ80 2019 2.3T Automatic Shengshi Huazhang Edition is equipped with a 2.3-liter inline four-cylinder turbocharged engine with a cast iron structure, delivering a maximum power of 170 kW and a maximum torque of 345 Nm. It is paired with a 6-speed automatic manual transmission and features a front-engine, four-wheel-drive configuration.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.