How much engine oil should be added to the Changan CS75?
1 Answers
Changan CS75's 1.5T Blue Whale engine requires 3L of engine oil. After filling, the oil level on the dipstick should be at the middle mark. The Changan CS75 is a compact SUV under Changan Automobile, with body dimensions of 4650x1850x1715mm and a wheelbase of 2700mm. It is powered by a new-generation Blue Whale NE1.5T high-pressure direct injection engine, delivering a maximum power of 132kW and a peak torque of 300N·m. The transmission is matched with a new Blue Whale 7-speed wet dual-clutch gearbox, with an official comprehensive transmission efficiency of up to 94.3%. The method for changing the engine oil in the Changan CS75 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Loosen the oil drain plug with a wrench, and use an oil pan to catch the old oil until no more oil flows out. Start the engine for 30 seconds to allow the oil in the main oil passage to drain; Remove the oil filter with a special wrench; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover filler port, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check that the engine oil level is within the standard range.
