How much engine oil should be added to an Audi each time?

2 Answers
OAbel
08/31/25 2:02am
Audi cars require approximately 4.8 liters of engine oil per refill. Engine oil consists of two components: base oil and additives. The base oil is the main constituent of lubricating oil, determining its fundamental properties, while additives serve to compensate for and enhance any deficiencies in the base oil's performance. Functions of engine oil: The primary functions of engine oil are lubrication, cleaning, and heat dissipation. In fact, many parts of a vehicle use oil, but the oil that needs to be changed every 5,000 kilometers refers specifically to engine oil. Most people generally use semi-synthetic or fully synthetic oils, with conventional oil being less commonly used. Conventional oil is typically employed in agricultural machinery, three-wheeled vehicles, and motorcycles. Oil change intervals: Conventional oil: 5,000 kilometers, Semi-synthetic oil: 7,500 kilometers, Fully synthetic oil: can go up to 10,000 kilometers before requiring maintenance.
Was this review help?
4
3
Share
VanCalvin
09/12/25 5:37am
The first time I drove an Audi, I was completely confused about the engine oil quantity. After checking the owner's manual myself, I realized the amounts vary significantly between models - for example, the A4 typically requires 4 to 5 liters, while the Q7 series might need around 6.5 liters. Never guess - the oil level must stay between the MIN and MAX marks on the dipstick: overfilling can cause leaks and damage seals, while underfilling leads to engine overheating and wear. I remember one DIY attempt where I only added 4 liters, resulting in loud engine noises on the road that forced me to top up immediately. Now I recommend beginners always check the dipstick when the engine is cold and parked, referring to the manual's specific data. Regular maintenance is crucial too, as aged oil loses lubrication efficiency. Always use the recommended viscosity (like 5W-30 or 0W-40 listed in your manual) and avoid cheap oils. Proper oil quantity improves driving safety, fuel efficiency and reduces wear - I've developed a monthly checking habit that's saved me considerable repair costs.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

Where is the USB port located in the Cadillac XTS?

The USB port in the Cadillac XTS is located inside the center armrest. Alternatively, you can purchase a Type-C to USB adapter to use the Type-C port for connecting a USB drive. The center armrest is equipped with a USB port where you can insert your USB drive. Main functions of the USB port in a car: It utilizes the car's standard power supply to charge electronic devices via USB or serves as a fixed power interface for electrical appliances. The USB port is a type of vehicle transmission cable, offering advantages such as fast data transfer, ease of use, hot-swappable support, flexible connectivity, and independent power supply. It is typically a universal interface for USB devices like flash drives and MP3 players. The car's USB port can be used to connect a USB drive, play music, charge mobile phones, serve as a USB car cigarette lighter interface, connect to electronic dashcams and driving recorders, or charge laptops and tablets. Precautions for using the USB port: Charging should only be done when the car's engine is running to avoid damaging electrical devices due to unstable power supply. Avoid connecting too many devices to prevent overloading and damaging the car battery or alternator. Do not use the USB port during thunderstorms to avoid lightning strikes. Avoid using the USB port in humid environments, as rust or water stains may prevent the USB drive from connecting properly.
10
2
Share

What are the effects of not releasing the car handbrake?

Not releasing the handbrake will directly cause excessive wear on the brake pads and brake discs. The friction-generated heat can overheat the disc surface, which may then transfer to the wheel hub and tires, potentially leading to a tire blowout in severe cases. Indirect effects include increased driving resistance, higher loads on the engine and transmission, and excessive torque on components like the driveshaft and universal joints, which can result in metal fatigue over time. Not releasing the car handbrake can also lead to increased fuel consumption. This happens because the handbrake applies braking force to the car, and if it is not released or not fully released, it is equivalent to constantly braking. This requires more throttle to maintain speed, leading to a significant increase in fuel consumption. Precautions when using the handbrake: Do not use the handbrake as a substitute for the footbrake during high-speed driving. The handbrake primarily controls the rear wheels, and applying it at high speeds can easily cause the car to roll over. When stuck in traffic on a slope, do not forget to engage the handbrake to prevent the car from rolling backward. Forgetting to release the handbrake while driving will cause significant brake wear, leading to a decline in braking performance.
2
0
Share

What is the braking distance of the Passat in meters?

Passat braking distance is 42 meters. Braking distance: The braking of a car mainly depends on the friction between the tires and the ground, and the magnitude of the friction depends on the friction coefficient. When the friction coefficient is constant, the braking distance depends on the speed. If the speed doubles, the braking distance will increase by 4 times. Passat braking system: The brakes commonly used on Passat cars generate braking torque through friction between the fixed components and the rotating components' working surfaces, known as friction brakes. Passat braking performance: The Passat's brake pedal has moderate damping with good pedal feel. The initial stage of braking is relatively weak, but the latter half shows significantly stronger braking force. The vehicle speed decreases rapidly during braking, allowing the car to stop within a short distance.
3
3
Share

Where is the interior temperature sensor located on the Chery A5?

The interior temperature sensor of the Chery A5 is located inside the evaporator box. Function and Principle: Its function is to monitor the ambient temperature and air conditioning temperature, and control the operation of the air conditioning. The working principle is that its resistance changes with temperature, and it works in conjunction with the controller to control the compressor's start-stop temperature. Introduction to the Interior Temperature Sensor: The interior temperature sensor includes: the interior temperature sensor and the intake pipe of the interior temperature sensor. The interior temperature sensor is made of thermistor material with a negative temperature coefficient characteristic. Regulating Interior Temperature: The interior air temperature sensor transmits the temperature signal to the ECU. The ECU analyzes and judges the signal, then sends commands to the blower to control its speed, thereby achieving the effect of regulating the interior temperature.
3
3
Share

When is the Best Time to Refuel a Car Based on Remaining Gasoline?

It is advisable to refuel when the car has about 1/4 of its gasoline left. When the yellow warning light comes on, it indicates that there is only a small amount of fuel remaining in the tank, and you should refuel as soon as possible. Ideally, you should refuel before the yellow light illuminates. It is essential to maintain an adequate amount of gasoline in the engine. Avoid waiting until the yellow light comes on to refuel. The engine's fuel system includes a fuel supply device, commonly known as the fuel pump, which requires proper cooling. The cooling medium for the fuel pump is the gasoline itself. If the gasoline level is too low, the fuel pump may not cool sufficiently, leading to potential damage. Therefore, most drivers today avoid waiting until the yellow light appears to refuel. Generally, when the fuel level drops below 1/4, it is time to refuel. Precautions for refueling: Avoid filling the tank to the brim or until the pump automatically stops ("jump gun"). Doing so in summer can be dangerous, as gasoline expands due to thermal expansion and contraction, potentially causing overflow. Additionally, overfilling can damage the carbon canister. Excess gasoline may flow into the carbon canister along with fuel vapors, leading to damage. A damaged carbon canister cannot filter fuel vapors properly, allowing gasoline to enter the vehicle's interior, which poses a significant safety risk.
6
4
Share

What is the weight of the Mercedes-Benz G?

The curb weight of the Mercedes-Benz G is 2610 kilograms. Despite weighing over 2 tons, it can accelerate from 0 to 100 km/h in 4.5 seconds and offers excellent off-road capability. Automotive design indicators: The vehicle weight, also known as curb weight, refers to the total weight of a car when it is fully equipped according to factory specifications, including items like spare tires, tools, and all fluids filled. This weight is closely related to the vehicle's design quality, manufacturing standards, and industrial level. The curb weight represents a car's own weight, which includes the vehicle's weight under normal driving conditions plus all attached accessories. Relationship with fuel consumption: The curb weight is also an important factor affecting a car's fuel consumption. There is a proportional relationship between fuel consumption and curb weight, meaning that vehicles with greater curb weights tend to consume more fuel.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.