How much engine oil should be added to a Land Rover Evoque 2.0t?

1 Answers
DelHarmony
07/29/25 10:28pm
Land Rover Evoque 2.0t requires 6 liters of engine oil per refill. Here is some relevant information about the Land Rover Evoque 2.0t: 1. Engine oil selection: The Evoque is equipped with a turbocharged engine. When selecting engine oil, it is recommended to choose fully synthetic oil, and 5W30 grade oil can be used. 2. Exterior design: The wheels are a highlight of the Range Rover Evoque. The wheel design features a unique petal-like pattern, and the highly metallic wheels add a lively touch. 3. Powertrain: The Range Rover Evoque is equipped with a direct-injection turbocharged 2.0T-Si4 engine, delivering a maximum power output of 240 horsepower. It is paired with an AWF-21 six-speed automatic transmission.
Was this review help?
12
0
Share
More Forum Discussions

What Do PRNDS Stand for in Terms of Gear Positions?

P, R, N, D, S represent the following gear positions: 1. P (Park): This is the parking gear position. When engaged, the parking lock mechanism locks the transmission output shaft. 2. R (Reverse): This is the reverse gear position. Engaging this position connects the reverse hydraulic circuit, causing the drive wheels to rotate in reverse for backward movement. 3. N (Neutral): This is the neutral position. When engaged, the planetary gear system idles without power output. 4. D (Drive): This is the forward gear position. When the gear selector is in this position, the hydraulic control system automatically engages the appropriate forward gear circuit based on throttle opening and vehicle speed signals, enabling automatic gear shifting according to driving speed for automatic transmission functionality. 5. S (Sport): This is the sport mode. When the gear selector is in this position, the transmission control module receives the driver's command, activating sport mode with more aggressive shift logic and frequent gear changes, providing better control and throttle response for enhanced driving pleasure.
20
5
Share

What are the requirements for seat belt usage?

After fastening the waist belt, hook the rope's buckle at the same level as the safety rope, maintaining a distance approximately equal to the rope's length between the person and the hook. If the horizontal distance is too far, you can connect ropes for hanging. This way, in case of a fall, the human body will experience less swinging impact load compared to a vertical fall. During the swinging process, ensure to avoid collision with other objects. Introduction to seat belts: 1. Overview: Seat belts are safety components used in equipment, such as aircraft or during high-altitude work and performances, to ensure safety. The main materials are polyester, polypropylene, and nylon. Seat belts do not only refer to the webbing; besides the webbing, seat belts are also assembled with other components. 2. Expansion: "Safety" has become the primary consideration for drivers and passengers, and it is also one of the most important performance aspects of a car. Traditional components ensuring safe driving, such as rearview mirrors and side door mirrors (traditional rearview systems), seat belts, AIRBAG (airbags), and ABS (anti-lock braking system), are already familiar to most drivers and passengers and are commonly used in imported luxury cars.
14
4
Share

Does Parking in Neutral Gear Damage the Car?

Under no circumstances will shifting to Neutral (N) gear damage the car. Here are relevant details: 1. N Gear: The N position is one of the three standard gears in automatic transmission vehicles, located between the R (Reverse) and D (Drive) gears on the gearshift console. It essentially functions as the neutral gear in the transmission, designed to disconnect power transmission between the input and output shafts inside the gearbox. 2. P Gear: The P (Park) position is the most common gear in automatic transmission vehicles, typically situated at the foremost position on the gearshift console, ahead of the R gear. Its purpose is to lock the vehicle's axles when parked on slopes. 3. D Gear: The D position is the most frequently used gear in automatic transmission vehicles, usually located toward the middle-rear section of the gearshift console, behind the N gear. It enables the vehicle to automatically select appropriate gears during forward motion.
4
5
Share

What is needed to activate the screen mirroring function on the Trumpchi GS3?

To use the screen mirroring function on the Trumpchi GS3, you need a phone that supports MHL functionality, an HDMI port in the car, and an MHL cable. Here is a brief introduction about GAC Trumpchi: 1. Basic Information: As early as 2010, GAC Trumpchi became the first premium partner of the 16th Guangzhou Asian Games, and its first mid-to-high-end sedan, the Trumpchi GA5, became the official designated reception vehicle for the Asian Games shortly after its launch. 2. Brand Culture: GAC Trumpchi is the first independently developed model by GAC Group, targeting the mid-to-high-end market. Adhering to the brand philosophy of 'Building good cars for loved ones and filling the world with love,' it integrates GAC Group's resources and experience, insists on independent innovation, and is committed to developing vehicles suitable for Chinese driving habits and road characteristics.
17
1
Share

What are the consequences of not paying compulsory traffic insurance for a year if the car is not driven?

The consequence is that the car cannot be driven on the road. According to the "Road Traffic Safety Law," a warning or a fine ranging from 20 to 200 yuan may be imposed. Article 95 stipulates: If a motor vehicle driven on the road does not display the inspection qualification mark or insurance mark, or does not carry the vehicle license or driver's license, the traffic management department of the public security organ shall detain the motor vehicle and notify the party to provide the corresponding license, mark, or complete the necessary procedures. Compulsory Traffic Insurance for Vehicles: The full name of compulsory traffic insurance is "Compulsory Liability Insurance for Motor Vehicle Traffic Accidents." It is a compulsory liability insurance where the insurance company compensates for personal injury, death, and property losses of victims (excluding vehicle occupants and the insured) caused by road traffic accidents within the liability limits. The premium is based on the nationally unified standard rates. However, the price of compulsory traffic insurance varies for different vehicle types, primarily influenced by the number of seats. Compared to the more than 20 exemption clauses in commercial third-party insurance, compulsory traffic insurance covers a much broader range, including losses caused by intentional acts of the victim, the insured's own property losses, related arbitration and litigation costs, and some indirect losses caused by the accident. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory traffic insurance will compensate within the liability limits without any deductible or exemption. Introduction to Electronic Insurance Policies An electronic insurance policy refers to a digital policy issued by an insurance company using digital signature software and corporate digital certificates that comply with the PKI system, bearing the electronic signature of the insurance company. The insurance policy, abbreviated as the policy, is the formal written proof of the insurance contract between the insurer and the insured. The policy must fully record the rights, obligations, and responsibilities of both parties to the insurance contract. The content recorded in the policy serves as the basis for both parties to fulfill the contract. The insurance policy is proof of the establishment of the insurance contract. Advantages of Electronic Insurance Policies: Saves paper resources, eliminating the need to print insurance proof marks on paper; Saves time and is convenient, not restricted by time or location, with information universally accessible online anytime, quickly and easily; Allows for reissuance or resending, eliminating worries about losing it. If a paper version is needed offline, it can also be printed or mailed; Easy management, as electronic unification makes it convenient for insurance companies and traffic police departments to manage the insurance information of various vehicles.
6
4
Share

How Full Should the Fuel Tank Be in Summer?

It is appropriate to stop when the fuel nozzle automatically shuts off. Here are the relevant explanations: 1. Gasoline evaporation is unpleasant and carcinogenic: The activated carbon canister is usually located near the fresh air intake for the exterior circulation. When the tank is overfilled, the carbon canister becomes saturated, and excessive pressure leads to venting, allowing air containing gasoline components to enter the cabin, which can affect the health and safety of the driver and passengers. 2. Damage to the carbon canister: If the tank is overfilled, liquid gasoline instead of gasoline vapor may enter the carbon canister, causing damage. The carbon canister is typically installed between the fuel tank and the engine. Since gasoline is a volatile liquid, the fuel tank often contains vapor at normal temperatures. The fuel evaporation emission control system is designed to direct these vapors into the combustion process and prevent them from evaporating into the atmosphere. The activated carbon canister storage device plays a crucial role in this process.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.