How much engine oil should be added to a BMW 530?

What are the effects of shifting to P gear before the car comes to a complete stop?

The impact of shifting to P gear before the car comes to a complete stop depends on the speed: 1. If the speed does not exceed 5 kilometers per hour, there will be no damage to the components; 2. If the speed is too high, it may cause gear damage, leading to major malfunctions. The P gear is the parking gear in an automatic transmission, which mechanically locks the wheels to prevent rolling and avoid unnecessary accidents. The correct method for parking an automatic transmission car is: 1. Engage the handbrake; 2. Shift to P gear; 3. Release the foot brake and turn off the engine. Other gears in an automatic transmission include: 1. R gear for reverse; 2. N gear for neutral; 3. S gear for sport mode; 4. D gear for drive; 5. L gear for low speed; 6. M gear for manual mode.

6

3

Share

Where is the door drain hole located?

The door drain holes are located at the bottom of the door panel, with two drainage outlets on each door. The main components of a car door include: 1. Door body: comprising the inner door panel, outer door panel, door window frame, door reinforcement beam, and door reinforcement plate; 2. Door accessories: including door hinges, door opening limiters, lock mechanisms with inner and outer handles, door glass, window regulators, and sealing strips; 3. Interior trim panels: consisting of fixed panels, core panels, interior upholstery, and armrests. Car doors can be categorized by their opening methods into: 1. Front-hinged doors; 2. Rear-hinged doors; 3. Sliding doors; 4. Upward-swinging doors; 5. Folding doors; 6. One-piece doors; 7. Split doors.

4

1

Share

What Transmission is Paired with the Changan Eado?

Changan Eado is paired with a 7-speed dual-clutch transmission, 5-speed manual transmission, 6-speed automatic manual transmission, and CVT continuously variable transmission. The functions of the transmission are: 1. To change the transmission ratio; 2. To expand the torque and speed of the driving wheels; 3. To enable the car to reverse; 4. To facilitate gear shifting or power output of the transmission. Taking the 2020 Changan Eado as an example, it is a compact car with body dimensions of: length 4730mm, width 1820mm, height 1505mm, and rear wheel track of 1566mm. The 2020 Changan Eado is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 158ps, a maximum torque of 260nm, and a maximum power of 116kw.

8

4

Share

Can I switch to automatic transmission after passing Subject 1?

You can switch to automatic transmission after passing Subject 1, but you need to resubmit the application form and medical examination certificate. Passing score for Subject 1: The total test time for Subject 1 is 45 minutes. The test paper consists of 100 questions, including true/false questions and single-choice questions, with a full score of 100 points and a passing score of 90. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Specifications". Examination process: Follow the arrangement of the staff and receive your own driving school file in order in the waiting room; Carry and present your ID card for inspection by the supervising police officer; Mobile phones must be turned off when entering the examination area; No loud noise is allowed in the examination area; Regulation textbooks are not allowed to be brought into the examination room (or put into the bag); After the examination, keep your ID card safe and hand over the file to the "Certificate Submission Window" at the front of the examination room; Candidates who pass the examination will leave the examination room after signing under the guidance of the staff at the exit; Candidates who fail the examination can leave the examination room and wait for the driving school staff to notify them of the retake time.

6

3

Share

Can the ETC device still be used after being removed?

Once removed and reinstalled, it cannot function normally. During installation, there is a button on the back of the device that connects to the windshield. Data is only saved when this button is pressed. When the device is removed a second time, the button pops out, triggering its reset mechanism and clearing all data. As a result, it becomes unusable and requires a complete reinstallation. ETC stands for Electronic-Toll-Collection, which is an electronic toll collection system. To apply for ETC, the vehicle owner must provide original and photocopies of their valid ID card and vehicle registration certificate. If applying through an agent, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed. Applicants must be between 18 and 60 years old, and the vehicle must be registered under their name. For company vehicles, the required documents include: An introduction letter from the vehicle owner (with official seal); a photocopy of the organization code certificate or business license (with official seal); the agent's original ID card; the original vehicle registration certificate; and the vehicle requiring ETC installation. How ETC works: The vehicle-mounted electronic tag, installed on the windshield, communicates with the microwave antenna in the ETC lane at toll stations. Through computer networking technology, it settles transactions with the bank in the background, allowing vehicles to pay highway or bridge tolls without stopping. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass toll stations without stopping; Cost-saving: Reduces wear and fuel consumption by minimizing vehicle starts and stops, and users can enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC technology is more mature and advantageous.

2

5

Share

Are there any dress code requirements for the Subject 1 test?

There are no specific dress code requirements for the Subject 1 test. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," candidates can take the Subject 1 test twice on the same day. If they fail the first attempt, they can retake it for free. If they fail the second attempt, the Subject 1 test is terminated, and they can only reschedule the test after ten days. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. The test covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The Subject 1 test consists of 100 questions, including single-choice questions and true/false questions, with each question worth 1 point and a total score of 100. If a candidate answers 11 questions incorrectly, the system will automatically submit the test and end the session. The Subject 1 test is computer-based, with a time limit of 45 minutes. Subject 1 test content includes: driver's license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should pay attention to their attire—no slippers are allowed. Electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, verify your identity at the assigned seat and begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it—unsigned reports are considered invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, with one retake if you fail. If you do not take the retake or fail it, the test is terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your previously passed road driving skills test results remain valid. There are three subjects in the driver's license test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 consists of two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (under the Ministry of Public Security Order No. 123) does not include "Subject 4."

10

0

Share

How much engine oil should be added to a BMW 530?

What are the effects of shifting to P gear before the car comes to a complete stop?

Where is the door drain hole located?

What Transmission is Paired with the Changan Eado?

Can I switch to automatic transmission after passing Subject 1?

Can the ETC device still be used after being removed?

Are there any dress code requirements for the Subject 1 test?

How to Determine if the Car's Primer is Damaged?

What is the operation method of an automatic transmission car?

What is the method to replace the key battery for the Geely Borui?

Is Changan Ford a Domestic Car?