How much engine oil should be added to a BMW 520?

1 Answers
StJoanna
07/29/25 3:28pm
BMW 520 requires approximately 4.5 liters of engine oil. The method for adding engine oil is as follows: 1. Remove the engine oil cap; 2. Lift the vehicle using a jack; 3. Loosen the oil drain plug on the oil pan and drain the oil; 4. Tighten the plug after draining and add new engine oil. Taking the 2017 BMW 520 Classic as an example, it belongs to the mid-to-large-sized car category with the following dimensions: length 5055mm, width 1860mm, height 1491mm, wheelbase 3108mm, and a fuel tank capacity of 70 liters. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 135kW at 5000rpm.
Was this review help?
19
2
Share
More Forum Discussions

How to Check Fuel Consumption on Volkswagen Tayron?

Tayron's fuel consumption can be viewed on the LCD instrument panel. With the central control screen turned on, press the CAR button on the lower left to display driving information (driving distance, average speed, driving time, average fuel consumption). Below are the specific details of Volkswagen Tayron: 1. TAYRON Tayron is a German premium midsize SUV from FAW-Volkswagen, offering four powertrain options: 280TSI, 330TSI, 380TSI, and both front-wheel drive and four-wheel drive. 2. Tayron has a length of 4595mm, width of 1860mm, height of 1660mm, and wheelbase of 2731mm. 3. Tayron is equipped with the EA888 2.0T turbocharged engine and features the DQ500 seven-speed wet dual-clutch transmission.
9
4
Share

How to replace the key battery for Mercedes-Benz C200?

Mercedes-Benz C200 replacement method for the key battery is: 1. Turn the key to the back and press the button; 2. Push the back cover forward and remove it; 3. Pull out the side slot and take out the old battery; 4. Replace with a new battery, reinsert it into the slot, and cover the back cover. The Mercedes-Benz C200 is a mid-size car. Taking the Mercedes-Benz C200 2018 Sport Edition 4MATIC as an example, its body dimensions are: length 4714 mm, width 1810 mm, height 1442 mm, wheelbase 2840 mm, and fuel tank capacity 66 liters. The Mercedes-Benz C200 2018 Sport Edition 4MATIC is equipped with a 2.0T turbocharged inline 4-cylinder engine, with a maximum power of 135 kW and a maximum power speed of 5500 rpm, matched with a 9-speed automatic manual transmission.
19
3
Share

What is the emission standard of the Cadillac XTS?

Cadillac XTS complies with the China V emission standard, which refers to the fifth stage of national motor vehicle pollutant emission standards in China. Its control level is equivalent to the fifth stage emission standard currently implemented in Europe. The Cadillac XTS is a mid-to-large-sized 4-door, 5-seater sedan launched by Cadillac. Its body dimensions are: length 5103mm, width 1852mm, height 1502mm, with a fuel tank capacity of 70 liters. The Cadillac XTS is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 198 kW and a maximum torque of 353 Nm. It adopts a front-engine, front-wheel-drive layout, with MacPherson independent suspension at the front and multi-link independent suspension at the rear.
4
0
Share

What is the actual fuel consumption of the Land Cruiser V6?

The Land Cruiser V6 version has a fuel consumption of 16 liters per 100 kilometers. Below is some relevant information about the Land Cruiser: 1. In terms of power, the Land Cruiser is equipped with two engines: a 4.0-liter V6 naturally aspirated engine and a 4.6-liter V8 naturally aspirated engine. The 4.0-liter V6 naturally aspirated engine has a maximum power of 202 kW and a maximum torque of 385 Nm. This engine reaches its maximum power at 5,600 rpm and its maximum torque at 4,400 rpm. The 4.6-liter V8 naturally aspirated engine has a maximum power of 228 kW and a maximum torque of 453 Nm. This engine reaches its maximum power at 5,500 rpm and its maximum torque at 3,400 rpm. 2. In terms of suspension, the Land Cruiser uses a double-wishbone independent suspension at the front and a four-link solid axle suspension at the rear.
13
5
Share

Will replacing the front fender cause the car to depreciate?

Replacing the front fender will cause the car to depreciate. Here is some relevant information about the front fender: 1. Introduction: The fender is the outer body panel that covers the wheel, named for its shape and position resembling a bird's wing in older car models. Based on installation location, it is divided into front fender and rear fender, with the front fender installed at the front wheel area. 2. Function: The fender's role is to prevent sand, gravel, and mud kicked up by the wheels from splashing onto the underbody of the car during driving. Therefore, the material used must be weather-resistant and have good formability. Some cars have front fenders made of slightly elastic plastic materials.
8
0
Share

Is it necessary to cover a new car with a car cover when parked outdoors?

The new car parked outdoors needs to be covered with a car cover. Here are the relevant introductions about car covers: 1. The function of the car cover: The main function of the car cover is to prevent dust, sun exposure, rain, corrosion, etc. The car cover has a good protective effect on the car. The car cover can effectively prevent bad weather from corroding the car paint. Another function is to prevent others from scratching the car paint. 2. Precautions: When covering the car with a car cover, it is best to wait until the vehicle has completely cooled down before proceeding. Because after the vehicle is turned off after driving, the temperature of the vehicle cannot drop instantly. After covering the car with the car cover, the local temperature of the car cover rises, causing the humidity to increase, and there will be no air flow inside the car cover.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.