···
Log in / Register

How much engine oil should be added for a 1.5L engine?

1 Answers
McGage
09/02/25 3:24am
1.5L engines require 3.5 to 4.5 liters of engine oil. The effects of too much or too little engine oil are: 1. Excessive oil: Causes severe agitation of engine components during operation, increasing internal power loss and leading to more oil splashing onto cylinder walls, potentially resulting in oil burning issues; 2. Insufficient oil: Results in poor lubrication for bearings and journals due to inadequate oil quantity, accelerating wear and potentially causing bearing seizure accidents. Engine oil composition includes: 1. Base oil: The main component determining fundamental lubricant properties; Additives: Compensate for and improve deficiencies in base oil performance while adding new characteristics, making them essential components of lubricants.
Was this review help?
13
3
Share
More Forum Discussions

Is MG a Domestic Car Brand?

MG is a domestic car brand, and its models include: MG6, MG5, MG ZS, MG HS, MG Pilot, etc. Taking the 2020 MG6 as an example, its body dimensions are: length 4704mm, width 1848mm, height 1466mm, with a wheelbase of 2715mm. The 2020 MG6 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 133 kW and a maximum torque of 285 Nm. It is paired with a 6-speed manual transmission. The front suspension uses a MacPherson independent suspension, and the rear suspension employs a multi-link independent suspension.
7
2
Share

What brand are the original tires on the Jeep Cherokee?

The original tires on the Jeep Cherokee are Bridgestone. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. The dimensions of the Jeep Cherokee are: length 4669 mm, width 1865 mm, height 1691 mm, with a wheelbase of 2707 mm. The Jeep Cherokee is equipped with a 2.0T turbocharged engine, delivering a maximum power of 195 kW and a maximum torque of 400 Nm, paired with a 9-speed automatic transmission.
8
5
Share

Should Windshield Washer Fluid Be Diluted with Water?

Whether windshield washer fluid should be diluted with water depends on the type of fluid: 1. Ready-to-use liquid windshield washer fluid does not need dilution and can be directly poured into the reservoir; 2. Solid windshield washer fluid requires dilution, as it needs to be dissolved in clean water before use; 3. Highly concentrated liquid windshield washer fluid must be diluted with water in the correct proportion, as direct use can be too corrosive. Windshield washer fluid, short for automotive windshield cleaning fluid, mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Based on its form, windshield washer fluid can be categorized into solid and liquid types, both providing cleaning and antifreeze properties.
2
5
Share

How to Adjust the Headlight Height of the Tayron?

The method to adjust the headlight height of the Tayron is: Press the small lever near the front wheel, and the two sensors at the front and rear will detect the vehicle's height. Adjust the height of the headlights by raising the front sensor or lowering the rear sensor. The dimensions of the Tayron are: length 4453mm, width 1841mm, height 1632mm, with a wheelbase of 2680mm. The Tayron is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. It features a front MacPherson independent suspension and a rear multi-link independent suspension.
17
0
Share

How to deal with scratches under the front bumper?

Scratches under the front bumper can be dealt with as follows: 1. If the scratch is not extensive, follow the normal paint repair procedure to restore it to its original condition; 2. If the scratch is extensive, or there is even cracking or breakage, use plastic welding, metal welding, or special techniques like fiberglass welding for repair, followed by the normal paint repair procedure to restore its appearance. The front bumper consists of an outer panel, cushioning material, and a crossbeam, and its functions are: 1. To provide cushioning and protect the front and rear body of the car in low-speed collisions; 2. To protect pedestrians in case of an accident involving pedestrians; 3. To serve a decorative purpose.
3
2
Share

Which Buick models are equipped with three-cylinder engines?

Buick models equipped with three-cylinder engines include: Excelle, Verano, Envision, and Envision Plus. Taking the 2020 Buick Verano as an example, its body dimensions are: length 4723mm, width 1802mm, height 1466mm, with a wheelbase of 2700mm, a fuel tank capacity of 52 liters, and a trunk capacity of 455 liters. The 2020 Buick Verano is powered by a 1.0T turbocharged engine, with a maximum power output of 92kW and a maximum torque of 180Nm, paired with a 6-speed automatic transmission. It features a front McPherson independent suspension and a rear torsion beam with Watt's linkage non-independent suspension.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.