How Much Engine Oil Should a Jog 100 Take?

Which Foot Controls the Clutch?

Left foot for clutch, right foot for accelerator and brake. When operating the clutch with the left foot, the heel should remain on the floor. Clutch location: The clutch is housed in the flywheel housing between the engine and transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, with the clutch output shaft serving as the transmission input shaft. Clutch operation: While driving, the driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby interrupting or transmitting power from the engine to the transmission. The clutch is a common component in mechanical drive systems, allowing the drivetrain to be disengaged or engaged at any time.

11

2

Share

What is the normal tire pressure for the GS4?

The normal tire pressure for the Trumpchi GS4 is generally between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and decreased by 0.1 bar in summer. On the Trumpchi GS4, pressing the 'set' button on the dashboard will display the tire pressure monitoring system to check the tire pressure. However, the tire pressure monitoring system is only available on the luxury and premium versions of the GS4. The base models do not come with this system and require aftermarket installation. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: 1. Abnormal tire pressure. The system will typically alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. 2. The tire pressure monitoring system has not been reset. After inflating the tires, if the system is not reset in time, it will continue to display the previous data, causing the indicator light to stay on. Simply reset the tire pressure monitoring system to resolve this issue. 3. The tire pressure sensor is damaged. The tire pressure sensor, which monitors the tire pressure, is installed inside the tire and connected to the tire valve. If the sensor is damaged during driving, it will trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.

2

1

Share

Does a Dual-Clutch Transmission Experience Significant Wear During Startup?

Starting with a heavy throttle on a dual-clutch transmission can cause certain damage to the vehicle. It is not recommended to accelerate or decelerate abruptly during driving. Definition of Dual-Clutch Transmission: A Dual-Clutch Transmission (DCT) differs from conventional automatic transmission systems. Based on a manual transmission yet belonging to the automatic transmission category, it not only offers the flexibility of a manual transmission and the comfort of an automatic transmission but also provides uninterrupted power output. Advantages of Dual-Clutch Transmission: The gear shifting time of a dual-clutch transmission is extremely short, even faster than that of a manual transmission, taking less than 0.2 seconds. By eliminating torque interruption, the dual-clutch transmission ensures that the engine's power is continuously utilized and always operates at its optimal level, leading to significant fuel savings. Compared to traditional planetary gear automatic transmissions, it is more conducive to improving fuel economy, with fuel consumption reduced by approximately 15%.

2

5

Share

Can the ETC device be placed on the tinted black area?

ETC devices can be installed on the black dotted area of the windshield, as long as they do not obstruct the driver's view and can detect the toll station's scanning equipment. However, installing them outside the black dotted area has drawbacks, such as reduced solar charging capability, which may lead to power depletion over time. Correct installation positions for ETC: For small vehicles like cars and vans, the ETC card and OBU device should be installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is on the lower middle part. ETC installation requirements: height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the electronic tag surface and the horizontal plane). The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.

20

3

Share

Is power steering fluid the same as hydraulic transmission fluid?

Power steering fluid and hydraulic transmission fluid are the same. Introduction to power steering fluid: Power steering fluid is a type of transmission fluid, and a crucial indicator is its low-temperature fluidity. Even when temperatures drop to several dozen degrees below zero, it does not thicken, ensuring smooth control of the steering system. Usage method: Start the car and use an oil extractor to remove all the old fluid. Inject new power steering fluid, then turn the steering wheel back and forth to allow the new fluid to circulate. For thorough circulation, it is best for the driver to turn the steering wheel fully left and right, then make slight left and right turns. The purpose of turning the steering wheel back and forth is to expel the old fluid from the steering system, but avoid holding the steering wheel at full lock for extended periods, as this can cause excessive oil pressure and lead to the power steering fluid being ejected.

7

2

Share

What is a Flood-Damaged Vehicle?

Flood-damaged vehicles refer to cars that have been submerged in water and subsequently sold to used car markets across China through certain channels. One-time hardware damage in flood-damaged vehicles: Many electronic components are one-time use and cannot be opened. Although they may appear fine during repairs, various issues are bound to arise during later use. The repair costs for such vehicles can be astonishingly high. Therefore, if your city frequently experiences natural disasters like droughts or floods, it is advisable for car owners to purchase relevant vehicle insurance. Low safety performance of flood-damaged vehicles: If a motor vehicle is submerged in water, it can easily lead to rusting of body components, shortening the vehicle's lifespan and reducing its safety performance. For example, water damage can cause corrosion and rusting of the vehicle's wiring, leading to sudden engine shutdowns or spontaneous combustion due to short circuits while driving, with potentially unimaginable consequences.

19

0

Share

How Much Engine Oil Should a Jog 100 Take?

Which Foot Controls the Clutch?

What is the normal tire pressure for the GS4?

Does a Dual-Clutch Transmission Experience Significant Wear During Startup?

Can the ETC device be placed on the tinted black area?

Is power steering fluid the same as hydraulic transmission fluid?

What is a Flood-Damaged Vehicle?

Does the New Car Come with License Plate Registration?

What are the penalties for speeding between 70% and 100% over the speed limit?

Can National II Diesel Vehicles Still Undergo Inspection?

What is the surface of a motorcycle racing track?