How much engine oil does the Reiz require?

2 Answers
EllianaRose
08/28/25 6:28am
The Reiz requires approximately 6.5 liters of engine oil. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil serves as the primary component of lubricating oil, determining its fundamental properties, while additives compensate for and enhance any deficiencies in the base oil's performance. The Reiz is a mid-sized 4-door 5-seater sedan with the following dimensions: length 4750mm, width 1795mm, height 1450mm, and a wheelbase of 2850mm. It is equipped with a 2.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 142 kilowatts and a maximum torque of 236 Newton-meters. The vehicle features a front-engine rear-wheel-drive layout, with a double-wishbone suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
8
4
Share
Juan
09/10/25 4:45am
I remember that the Toyota Reiz usually requires about 5.2 to 5.5 liters of engine oil, depending on your engine model. For example, a 2.5L V6 engine needs this amount for an oil change. Engine oil isn't something you can just add randomly. Too little oil leads to insufficient lubrication and engine overheating, while too much can cause excessive oil pressure, potentially damaging seals. It's recommended to use full synthetic oil like the 0W-20 grade, which not only saves fuel but also protects the engine. Oil changes should be done every 5,000 to 10,000 kilometers. If you're doing it yourself, first drain all the old oil completely. After adding new oil, start the engine for a few minutes, then turn it off and wait a moment before checking the oil level with the dipstick to ensure it's at the middle mark for safety. In short, following the owner's manual is the most reliable approach.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What are the reasons for a motorcycle having normal ignition but unable to accelerate?

A motorcycle that starts but cannot accelerate or move may have the following reasons: 1. Damaged automatic centrifugal clutch: Improper clutch operation causing it to get stuck and not return to position, resulting in the motorcycle starting but unable to accelerate or move. 2. Broken drive belt: Usually caused by a malfunction in the pulley or belt, rendering the motorcycle unable to move. 3. Small sprocket detachment or rear sprocket chain drop: Leading to power transmission failure. 4. Overly lean air-fuel mixture: Causes insufficient gas thrust on the piston after ignition, prolongs combustion time, and leads to engine overheating. 5. Carburetor water ingress, blockage, or spark plug burnout: The carburetor requires cleaning or replacement after prolonged use. 6. Other reasons: Crankshaft oil seal failure on the generator side causing air leakage; Crankshaft housing mid-seam joint surface leakage; Crankshaft housing and cylinder joint surface leakage or incorrect piston assembly direction can result in inability to accelerate.
4
4
Share

What are the requirements for applying for a motorcycle driver's license?

Applying for a motorcycle driver's license is divided into two scenarios: initial application and additional endorsement. The specific requirements are as follows: 1. Initial Application: (1) Age between 18~60 years old, original ID card; (2) Six recent one-inch color photos with white background taken within the last three months; (3) Non-local residents need to prepare a residence permit. (4) Medical examination form and receipt, with corrected visual acuity of both eyes must be 5.0 or above. The medical examination mainly checks for color blindness, disabilities, poor eyesight, etc. 2. Additional Endorsement: (1) Age between 18~60 years old, original ID card; (2) Six recent one-inch color photos with white background taken within the last three months; (3) Non-local residents need to prepare a residence permit. (4) Medical examination form and receipt, with corrected visual acuity of both eyes must be 5.0 or above. The medical examination mainly checks for color blindness, disabilities, poor eyesight, etc. (5) Original driver's license, which must be held for at least one year with no 12-point record within that year.
6
1
Share

Is It a Big Deal to Buy a Car That Has Been in Stock for Eight Months?

A car that has been in stock for 8 months is considered an inventory car, and it is not recommended for purchase. If you do buy one, it will require a longer break-in period. Below is relevant information about inventory cars: 1. Definition of an inventory car: Generally, an inventory car refers to a vehicle that has remained unsold for more than 3 months after being manufactured. Since the automotive industry emphasizes timeliness, under normal circumstances, the process from manufacturing to selling a new car to a buyer can usually be completed within one or two months. Cars that remain unsold for more than 3 months or longer are typically considered inventory cars. 2. Comparison between inventory cars and new cars: "Cars are not ruined by driving but by sitting idle." For inventory cars parked without movement for months or even a year, components such as the battery, various fluids, rubber parts, paint, and related drainage holes are all likely to be affected to some extent. 3. Are there "additional after-sales guarantees" for buying an inventory car?: Currently, when consumers purchase a car, they must sign a purchase contract with the 4S store. However, the contract does not specify whether consumers who buy inventory cars are entitled to special extended warranties or after-sales services. Moreover, there are no relevant national laws or regulations to oversee the quality of inventory vehicles.
19
3
Share

What Causes Heavy Steering Assist?

Here are the reasons for heavy steering in cars: 1. Insufficient power steering fluid: Power steering fluid is the main power source that drives the car's movement. Therefore, when there is a shortage of power steering fluid, the car naturally has difficulty moving, let alone turning to change direction. 2. Damage to the steering gear or steering column bearings: This causes heavy steering. This is a mechanical failure. 3. Lack of lubrication or damage to the steering tie rod ball joint: Insufficient lubrication or damage to the steering tie rod ball joint results in heavy steering. Additional information: The car steering system is a series of devices used to change and maintain the car's direction of travel, playing a crucial role in the safe operation of the vehicle.
15
2
Share

What is the MIIT fuel consumption of the Zongshen 250?

The MIIT fuel consumption of the Zongshen 250 is 2.6-3.1 liters per 100 kilometers. Below is relevant information about Zongshen Group: 1. Introduction: Zongshen Industrial Group was founded in 1992 by founder Zuo Zongshen. It is a large private high-tech industrial, commercial and trade group engaged in research, development, manufacturing and sales, with over 30 wholly-owned and holding subsidiaries including the listed company Zongshen Power. 2. Group Industries: Including motorcycle engines, general power machinery, micro vehicle engines, marine engines, small aviation power, electric vehicles, and motorcycle components. The group has an annual production capacity of 2 million motorcycles, 4 million motorcycle engines, 100,000 micro vehicle engines, and 5 million general machinery products.
15
1
Share

Is a Tire Pressure of 170 Indicative of a Flat Tire?

Car tire pressure of 170 could indicate a flat tire. Below is relevant information about car tire pressure: 1. Concept: It refers to the air pressure inside the tire. There are several types of tire pressure gauges, with digital tire pressure gauges being relatively simple, directly displaying numerical values to indicate tire pressure. 2. Precautions: To measure car tire pressure accurately, it must be done when the tires are cold. Car tire pressure is displayed either indirectly or directly on the dashboard. When the tire pressure of a vehicle is abnormal, the tire pressure warning light on the dashboard will illuminate. It is advisable to maintain consistent tire pressure across all tires, as significant differences can lead to uneven tire wear over time, and in severe cases, may cause issues such as pulling to one side or uneven braking force distribution.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.