How much engine oil does the BMW X1 require?

2 Answers
DelBentley
07/24/25 5:52pm
According to BMW's official engine oil filling specifications, all BMW X1 models require 5 liters of engine oil. Additional details about the BMW X1 are as follows: 1. The BMW X1 adopts the latest design language of the BMW X family, featuring a large, poised one-piece double kidney grille paired with sharp and dynamic front and rear bumpers. 2. The new LED headlights offer greater visual impact, complementing the 18/19-inch aluminum alloy wheels. 3. The BMW X1 is equipped with two engine options: a 1.5T and a 2.0T, balancing powerful performance with fuel efficiency. The 1.5T model delivers a maximum power of 103 kW and a maximum torque of 220 Nm, while the 2.0T model produces a maximum power of 141 kW and a maximum torque of 280 Nm. 4. The BMW X1 comes standard with LED headlights, front sport seats, an electronic gear shift lever, six-color ambient lighting, and a driver-side welcome logo.
Was this review help?
15
3
Share
McGraham
08/11/25 9:55am
I used to drive a BMW X1 and always kept an eye on the oil level, which typically ranged between 4.5 to 5.5 liters depending on the engine model. For instance, the 1.5L engine took about 4.5 liters, while the 2.0L engine required a bit over five liters. During every maintenance session, I made sure the technician verified the oil level because too little oil increases engine friction and accelerates wear, while too much can cause foaming and lubrication failure. If changing the oil yourself, first warm up the engine to normal operating temperature, then turn it off and wait ten minutes before checking the dipstick. The oil level should be between the min and max marks. Always use the manufacturer-recommended oil type, such as 5W-30, as specifications may vary slightly by model year—consulting the user manual is always a safe bet. Regular checks help prevent issues, and I made it a habit to measure the oil level monthly to avoid costly repairs down the line. Safe driving starts with these small details, so don’t overlook them.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

How to use the cruise control on Volkswagen Bora?

To use the cruise control on Volkswagen Bora: 1. Press the power button to activate the system (the cruise control indicator light on the dashboard will illuminate); 2. Accelerate to your desired speed, then press the SET button and release the accelerator pedal to maintain the current speed; 3. Use RES+ and SET- buttons for fine speed adjustments. Taking the Bora 2021 200TSI DSG Comfort Connect Edition as an example: This vehicle is manufactured by FAW-Volkswagen, classified as a compact car with gasoline powertrain. Its dimensions are 4663mm (length) × 1815mm (width) × 1462mm (height) with a wheelbase of 2688mm.
5
1
Share

How to Open the Hood of a Mercedes-Benz?

Method to open the hood of a Mercedes-Benz: 1. The hood release lever is located on the inner side of the driver's seat. 2. There is a small red lever above the clutch; pull this red lever. 3. Next to the front emblem, feel for a latch by hand from below and lift it upward to open the front hood. Functions of the hood: 1. Airflow guidance. 2. Protection for the engine and surrounding pipeline components. Beneath the hood are crucial parts of the car, including the engine, electrical circuits, fuel system, braking system, and transmission system, among others. 3. Aesthetics. The vehicle's exterior design is a direct reflection of its value, and the hood, as a significant part of the overall appearance, plays a vital role in enhancing visual appeal and embodying the concept of the entire car. 4. Assisting driving visibility. During driving, the shape of the hood helps effectively adjust the direction and form of reflected light, reducing the impact of glare on the driver. 5. Accident prevention. The engine operates in a high-temperature, high-pressure, and flammable environment, where overheating or accidental damage to components could lead to explosions, fires, or leaks. The hood serves as a protective shield, effectively blocking harm caused by such incidents.
2
5
Share

What Low Temperatures Can an Average Car Withstand?

An average car can withstand temperatures as low as minus forty degrees Celsius. In the northern regions of China, winter climates are extremely cold, typically ranging from minus 5 degrees Celsius to minus 25 degrees Celsius, with the coldest periods seeing temperatures drop below minus forty degrees. Low temperatures can severely impact a car's operation, particularly during cold starts, leading to noticeable difficulties in ignition, severe wear on assemblies, increased fuel consumption rates, and exacerbated exhaust pollution. When temperatures fall below minus 18 degrees Celsius to minus 20 degrees Celsius, cold starts become quite challenging. If temperatures drop below minus forty degrees Celsius, a car cannot start at all without preheating. During use, a car's engine performance in low-temperature starts is mainly influenced by the viscosity of the lubricating oil, the vaporization properties of the fuel, and the working capacity of the battery. To mitigate the effects of low temperatures on car performance, it is necessary to warm up the car before use. However, the warming-up process does not require the car to remain stationary for an extended period. Instead, after starting the vehicle, allow the engine to run at a high idle speed automatically, and once the idle speed slightly decreases, the car can begin moving.
13
0
Share

How Long Does It Generally Take for Car Paint to Dry?

After a car is painted, the paint can dry in two days during the summer when temperatures are higher. In winter, the drying time depends on the temperature and can take up to four to seven days. If the paint is baked, it can dry in two hours. For situations where the car is painted and picked up on the same day, it is recommended to wait two days before washing it. If the vehicle has sufficient ventilation and humidity, it can be washed after 6-7 hours. If the paint is dry, the car can be washed two days after the paint has dried. If the vehicle is painted in a paint booth, since it has already stayed in the booth for 3-4 hours, it can be washed immediately after being taken out. If the car has just been painted, be careful not to expose the freshly painted areas to water or dust. It's best not to drive the car out in rainy weather. The fresh paint is still delicate, and contact with rainwater can leave marks that may be difficult to remove, sometimes even impossible to polish out. It's advisable to park the car in a garage at night. As for sunlight, there's no need to worry—it only speeds up the drying process, which is beneficial.
9
1
Share

What brand is the BMW Z4 audio system?

BMW uses audio systems from American Bose, Harman Kardon, and Danish BO. Below is an extension about BMW car audio systems: 1. American Bose was founded in 1964 by Dr. Amar G. Bose, a professor at the Massachusetts Institute of Technology. The company has always adhered to the business philosophy of 'pushing the limits of exploration and enjoying the pinnacle of music,' investing 100% of its earnings into corporate development and product research without reservation. 2. Harman Kardon is a division of Harman International Industries (NYSE: HAR), specializing in the production of home and car audio systems, headquartered in Woodbury, New York, USA. JBL, AKG, and Infinity are also brands under the Harman Group. 3. Harman/Kardon was founded in 1953 by Dr. Sidney Harman and Bernard Kardon, both of whom were passionate about music and art. Danish BO is produced in Denmark, the country with the most beautiful audio equipment designs in the world. Denmark is also the country with the most audio brands globally, with approximately one brand for every 250,000 people.
1
4
Share

How to Determine If the Wiper Motor is Faulty?

To determine if the wiper motor is damaged, first ensure the car's ignition switch is in the power-on state, open the front hood, and then activate the wipers. If you can hear the motor running, it is functioning normally; otherwise, the motor is likely damaged. Below are specific reasons for car wiper damage: 1. Clogged pipes. Frequently driving on unpaved roads allows tiny dust particles to enter the wiper's spray nozzles. Over time, the dust dries up and blocks the nozzles, preventing the wipers from spraying water. Simply insert a brush into the wiper spray nozzles to clean out the dust or attached debris, and turn on the wiper spray switch while cleaning. 2. Insufficient washer fluid. The wiper's washer fluid container is located in the engine compartment. If the water level is too low, it will also prevent water from spraying. In this case, simply add water to the washer fluid container. 3. The wiper's washer fluid container has enough water, but no water sprays when the switch is activated. Open the washer fluid filler cap and turn on the wiper spray switch.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.