How much engine oil does a Volvo XC60 use?

What Type of Fire Extinguisher Should a Car Be Equipped With?

For cars, a 1-kilogram portable fire extinguisher is recommended, preferably a dry powder ABC type. Vehicle fire extinguishers are specifically designed for automotive use and come in two main types: non-pressurized hanging ultra-fine dry powder automatic fire extinguishing devices for vehicles, and miniature pressurized hanging ultra-fine dry powder automatic fire extinguishing devices for vehicles. Like household fire extinguishers, vehicle fire extinguishers also have an expiration date and should be replaced promptly once expired. If it has been 5 years since the manufacturing date, even if unused, the extinguisher must be sent to a professional maintenance unit for inspection to ensure safety and reliability, with subsequent inspections required every 2 years. Fire extinguishers that have been in use for 10 years from the manufacturing date must be mandatorily scrapped.

1

5

Share

Does the new Lavida have a rear anti-collision beam?

The new Lavida is equipped with both front and rear anti-collision beams. The anti-collision beam is a U-shaped channel pressed from cold-rolled steel plates, connected to the frame longitudinal beams, serving as the first barrier of passive safety for the vehicle. It is an important safety device that absorbs and mitigates external impact forces, protecting the front and rear of the car body. The new Lavida offers two engine options: a 1.4T and a 1.5L. The 1.5L engine delivers a maximum power of 85kW and a maximum torque of 150Nm, while the high-power version of the 1.4T engine provides a maximum power of 110kW and a maximum torque of 250Nm. The front design of the new Lavida resembles the Arteon, with chrome trim connecting the sharp headlight clusters, combined with a flat design concept that enhances its fashionable appeal.

16

2

Share

Where is the Kia fuel tank cap switch located?

Kia fuel tank cap switch is located on the floor to the left of the driver's seat. To open the fuel tank cap, you must pull the fuel filler switch. The methods to open the fuel tank are as follows: Mechanical key opening: This is commonly seen in some rugged off-road vehicles. Nowadays, most family cars do not use mechanical keys for opening as it is relatively complex to operate. In-car switch method: The location of the in-car fuel tank switch varies among different car models. It may be on the floor to the left of the driver's seat, on the left front door panel, or on the center console, all marked with a fuel pump icon. However, it's important to note that the in-car switch can easily lead to the driver forgetting to turn off the engine before refueling, so drivers should always remember to turn off the engine before refueling. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method. The driver only needs to park the car, and the fuel attendant can press to open the fuel tank for refueling. However, when not refueling, the driver should always remember to lock the central control, otherwise, the fuel tank cap can be opened.

9

0

Share

What is a Vehicle Identification Number and Where Can It Be Found?

Vehicle Identification Number is a unique set of seventeen letters and numbers assigned to a vehicle, used to identify the manufacturer, model, chassis number, and other details of the vehicle. The Vehicle Identification Number can be found on the vehicle's nameplate, which is usually located below the B-pillar and typically made of metal. The chassis number on the nameplate is usually machine-engraved rather than printed. The position of the nameplate varies among different vehicle models, so the exact location can be confirmed with a 4S dealership. Meaning of the Vehicle Identification Number: The VIN is a 17-character code composed of letters and numbers, also known as the 17-character identification code, chassis number, or 17-digit number. The arrangement and combination of the Vehicle Identification Number ensure that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for each vehicle, hence it is often referred to as the 'car's ID card'. Function of the Vehicle Identification Number: The chassis number follows specific rules, including the exclusion of certain characters such as O, Q, I, and 0. The letter Z is not valid in the year position, and the ninth character can only be a digit from 0 to 9 or the uppercase letter X. The following four digits must all be numbers and cannot be letters. Additionally, the VIN standard can be used to analyze vehicle configurations. Characters four to eight represent the engine and transmission model, which must match the information on the assembly nameplate without any discrepancies.

18

1

Share

Can the Business Class on Boeing 777 Lie Flat?

It can lie flat, featuring 180-degree fully flat seats, but the seat back must be adjusted upright during takeoff and landing. Basic Introduction: The Boeing 777 is a long-range, twin-engine wide-body airliner manufactured by Boeing in the United States. It is the world's largest twin-engine wide-body airliner, with a three-class cabin configuration accommodating between 283 and 368 passengers and a range of 5,235 to 9,450 nautical miles (9,695 to 17,500 kilometers). The Boeing 777 features a circular fuselage design, with a main landing gear consisting of 12 wheels, and its engines have the largest diameter among all airliners. Boeing invested heavily in the development of the 777, marking its second major gamble after the 747. Had it failed, Boeing might have faced bankruptcy, but fortunately, the 777 proved to be a successful aircraft. Design Features: A Boeing 777 aircraft comprises 3 million parts, supplied by over 900 suppliers from 17 countries worldwide. These include components such as the forward fuselage, wings, tail, engine nacelles, wing leading edge components, wing control surfaces, landing gear, ceiling support frames, nose wheel, doors, fins, and antennas. Different companies around the world were contracted for various parts, such as Rockwell in the U.S. and Embraer in Brazil, Mitsubishi Heavy Industries (fuselage surfaces) and Kawasaki Heavy Industries (fuselage surfaces) in Japan, Fuji Heavy Industries (central wing sections), and Ilyushin Aircraft Company in Russia (collaborating with Boeing on cabin luggage racks). Korean Air also participated in supplying a small portion of the components. Finally, under Boeing's supervision, the aircraft was assembled and test flights were conducted.

11

4

Share

What does it mean to hide a GPS in a car?

Vehicle-mounted GPS can monitor and locate the vehicle, as well as remotely cut off fuel and power. The following is an introduction to GPS: 1. Global Positioning System: The Global Positioning System (GPS) is a high-precision radio navigation positioning system based on artificial earth satellites. It can provide accurate geographical location, vehicle speed, and precise time information anywhere in the world and in near-Earth space. Since its inception, GPS has attracted many users due to its high accuracy, all-weather capability, global coverage, and convenience. 2. Positioning Principle: GPS positioning includes pseudo-range single-point positioning, carrier phase positioning, and real-time differential positioning.

5

4

Share

How much engine oil does a Volvo XC60 use?

What Type of Fire Extinguisher Should a Car Be Equipped With?

Does the new Lavida have a rear anti-collision beam?

Where is the Kia fuel tank cap switch located?

What is a Vehicle Identification Number and Where Can It Be Found?

Can the Business Class on Boeing 777 Lie Flat?

What does it mean to hide a GPS in a car?

What does the suffix Li in BMW series mean?

What is the oil model for Nissan Sylphy?

What Are the Reasons for Slow Engine Coolant Temperature Rise in Winter?

What Are the Reasons for the Airbag Light to Illuminate?