···
Log in / Register

How much does the Wuling Rongguang weigh?

1 Answers
LaLydia
08/30/25 6:05am
Wuling Rongguang has a curb weight of 1200 kg and a gross vehicle weight of 2110 kg. Below are the detailed specifications of the Wuling Rongguang: 1. Body dimensions: The Wuling Rongguang is a microvan under the Wuling brand, with a length of 4135 mm, width of 1625 mm, height of 1870 mm, and a wheelbase of 2700 mm. 2. Powertrain configuration: The Wuling Rongguang is equipped with two engines—a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine. The 1.2L engine delivers a maximum power of 56 kW and a maximum torque of 112 Nm, while the 1.5L engine produces a maximum power of 73 kW and a maximum torque of 135 Nm. Both engines feature multi-point fuel injection technology and use aluminum alloy cylinder heads with cast iron cylinder blocks.
Was this review help?
13
3
Share
More Forum Discussions

Does It Matter If the Address on the Driver's License Is Incorrect?

It does not matter if the address on the driver's license is different from that on the ID card. Below is some information regarding the address on the driver's license: 1. Notes on Changing the Address: If the address on the ID card changes, the driver's license remains valid. However, according to Article 70 of the 'Regulations on the Application and Use of Driver's Licenses': If the contact phone number, address, or other information of the driver changes, or if the employment information of drivers holding licenses for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks changes, they must report to the vehicle management office at the place where the driver's license was issued within 30 days of the information change. 2. Documents to Bring: Original and photocopy of the ID card, two 1-inch white-background photos to the vehicle management office for processing.
13
5
Share

Does Insurance Cover Flood-Damaged Vehicles?

If you have purchased insurance, your vehicle damaged in a flood will be covered by insurance. Here is some information about insurance compensation: 1. Legal provisions: According to the relevant provisions of the insurance policy, vehicle losses caused by general "natural disasters" such as rainstorms, floods, landslides, and mudslides fall under the coverage of the commercial auto insurance's vehicle damage insurance, and the insurance company will compensate accordingly. 2. Precautions: Note that the following situations may lead to claim rejection: If the engine stalls during water wading and is damaged due to forcibly restarting it, causing water ingress, the insurance company may refuse to compensate. Therefore, if your vehicle stalls while driving through water, never attempt to restart it forcibly.
10
2
Share

What Causes a Car to Lose Power After Driving Through Water?

It is normal for a car to lose power after driving through water because water has a lubricating effect, causing the tires to slip when passing through flooded roads. Here are some explanations for why a car may lose power after driving through water: 1. Shallow water crossing: It may be that the spark plugs or some electrical components got wet, but they will be fine after drying. 2. Precautions: If the car stalls immediately after driving through water, do not attempt to restart the ignition switch. Otherwise, water in the intake manifold may be sucked into the cylinders, causing cylinder scoring and engine damage. You should immediately call for roadside assistance, have the car towed for inspection, and notify your insurance company. The loss of power could be due to wet spark plugs or ignition coils, but the most likely cause is that driving through water has increased air humidity, leading to blocked air intake and insufficient air supply, resulting in reduced power.
20
0
Share

Will a Flat Tire Overnight Damage the Tire?

Leaving a tire flat overnight can cause damage. Here is some information about potential damage to car tires: 1. Consequences of Damage: A flat tire left overnight may damage the tire's cord layer. 2. Cause of Damage: Since the tire bears the entire weight of the vehicle, leaving it flat overnight can cause deformation even if no obvious issues are visible, which shortens the tire's lifespan. 3. Tire Lifespan: Generally, tire wear life ranges from 30,000 to 50,000 kilometers. Even if the tire hasn't reached the wear limit or mileage, it should be replaced if it has been in use for 5 years or shows significant cracks on the sidewalls.
9
5
Share

Is It Necessary to Replace with Aluminum Alloy Valve Stems?

If it's just for general use, there's no need to replace them. However, if you plan to install cap-type pressure indicators or alarm-type detection systems, it becomes quite necessary to switch to aluminum alloy valve stems. This is because the original plastic or rubber valve stems lack sufficient strength and are prone to cracking or leaking after prolonged exposure to bumps, vibrations, and shaking. Introduction to Aluminum Alloy Valve Stems: Aluminum alloy valve stems also fall under the category of metal valve stems. Their service life and air-tightness are comparable to those of steel valve stems. However, aluminum alloy is lighter in weight compared to steel, which undoubtedly benefits the dynamic balance of the wheels. Function of Valve Stems: Valve stems are one-way valves used for inflating and deflating the gas inside tires while maintaining internal tire pressure. Nowadays, cars use tubeless tires, where the valve stems are structurally separate from the tires. The valve stems are mounted on the rims to perform their function.
5
0
Share

What are the effects of water entering a car engine?

Water entering the engine can cause the piston stroke to become shorter, bend or break the engine connecting rod, and under extreme conditions, it may result in the broken connecting rod flying out and penetrating the cylinder block. Below is a partial introduction to the effects of water entering the engine: 1. Causes of water entry: The reason a car stalls in water is that the distributor cap loses its normal ignition function after getting wet, the engine air filter element becomes soaked, leading to increased intake resistance and water entering the combustion chamber, preventing the spark plug from igniting. 2. Determining if water has entered: Check the color of the engine oil for abnormalities. If the oil turns milky white, it indicates that water has entered the fuel tank or engine.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.